lkml.org 
[lkml]   [2018]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/3] mtd: rawnand: denali: add new clocks and improve setup_data_interface
On Thu, 14 Jun 2018 16:29:59 +0900
Masahiro Yamada <yamada.masahiro@socionext.com> wrote:

> Hi Richard,
>
> 2018-06-14 16:25 GMT+09:00 Richard Weinberger <richard@sigma-star.at>:
> > Masahiro,
> >
> > Am Donnerstag, 14. Juni 2018, 07:11:04 CEST schrieb Masahiro Yamada:
> >>
> >> The ->setup_data_interface() hook needs to know the clock frequency.
> >> In fact, this IP needs three clocks, bus "which clock?" is really
> >> confusing. (It is not described in the DT-binding at all.)
> >>
> >> This series adds more clocks. In the new binding, three clocks
> >> are required: core clock, bus interface clock, ECC engine clock.
> >>
> >> This series also takes care of the backward compatibility by
> >> providing hardcoded values in case the new clocks are missing.
> >> So, existing DT should work.
> >>
> >>
> >> Changes in v2:
> >> - Split patches into sensible chunks
> >>
> >> Masahiro Yamada (3):
> >> mtd: rawnand: denali_dt: use dev as a shorthand of &pdev->dev
> >> mtd: rawnand: denali_dt: add more clocks based on IP datasheet
> >> mtd: rawnand: denali: optimize timing parameters for data interface
> >
> > This still means that we need to feed at least 2/3 and 3/3 into -stable to
> > unbreak the driver.
>
>
> 3/3 is not mandatory.
>
> You can only back-port 1/3 and 2/3.

Well, patch 1 is not a fix, can we move it after patch 2 so that only
patch 2 is flagged with the Fixes+Cc-stable tags?

Thanks,

Boris

\
 
 \ /
  Last update: 2018-06-14 09:39    [W:0.057 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site