lkml.org 
[lkml]   [2018]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/5] spi: implement companion-spi driver
Date
From: Zhu Yi <yi.zhu5@cn.bosch.com>

The low level companion-spi driver encapsulates the communication
details with the companion processor, and provides interface for
the upper level drivers to access.

Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
---
drivers/spi/Kconfig | 2 +
drivers/spi/Makefile | 2 +
drivers/spi/companion/Kconfig | 5 +
drivers/spi/companion/Makefile | 2 +
drivers/spi/companion/core.c | 1185 ++++++++++++++++++++++++++++++
drivers/spi/companion/protocol-manager.c | 1032 ++++++++++++++++++++++++++
drivers/spi/companion/protocol-manager.h | 341 +++++++++
drivers/spi/companion/protocol.h | 273 +++++++
drivers/spi/companion/queue-manager.c | 144 ++++
drivers/spi/companion/queue-manager.h | 245 ++++++
include/linux/companion.h | 259 +++++++
11 files changed, 3490 insertions(+)
create mode 100644 drivers/spi/companion/Kconfig
create mode 100644 drivers/spi/companion/Makefile
create mode 100644 drivers/spi/companion/core.c
create mode 100644 drivers/spi/companion/protocol-manager.c
create mode 100644 drivers/spi/companion/protocol-manager.h
create mode 100644 drivers/spi/companion/protocol.h
create mode 100644 drivers/spi/companion/queue-manager.c
create mode 100644 drivers/spi/companion/queue-manager.h
create mode 100644 include/linux/companion.h

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index a75f2a2..8b575ec 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -799,6 +799,8 @@ config SPI_TLE62X0
# Add new SPI protocol masters in alphabetical order above this line
#

+source "drivers/spi/companion/Kconfig"
+
endif # SPI_MASTER

#
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 8e0cda7..ae369d9 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -112,3 +112,5 @@ obj-$(CONFIG_SPI_ZYNQMP_GQSPI) += spi-zynqmp-gqspi.o
# SPI slave protocol handlers
obj-$(CONFIG_SPI_SLAVE_TIME) += spi-slave-time.o
obj-$(CONFIG_SPI_SLAVE_SYSTEM_CONTROL) += spi-slave-system-control.o
+
+obj-y += companion/
diff --git a/drivers/spi/companion/Kconfig b/drivers/spi/companion/Kconfig
new file mode 100644
index 0000000..490a273
--- /dev/null
+++ b/drivers/spi/companion/Kconfig
@@ -0,0 +1,5 @@
+config COMPANION_SPI
+ tristate "Low level driver for companion communication (Bosch)"
+ depends on SPI
+ help
+ This driver communicates with the companion processor via SPI.
diff --git a/drivers/spi/companion/Makefile b/drivers/spi/companion/Makefile
new file mode 100644
index 0000000..e60e733
--- /dev/null
+++ b/drivers/spi/companion/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_COMPANION_SPI) += companion-spi.o
+companion-spi-objs := core.o protocol-manager.o queue-manager.o
diff --git a/drivers/spi/companion/core.c b/drivers/spi/companion/core.c
new file mode 100644
index 0000000..515e5ec
--- /dev/null
+++ b/drivers/spi/companion/core.c
@@ -0,0 +1,1185 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Companion low level init/core code
+ *
+ * Copyright (C) 2015-2018 Bosch Sicherheitssysteme GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/spi/spi.h>
+#include <linux/kfifo.h>
+
+#include "protocol-manager.h"
+
+#define DRIVER_NAME "companion-spi"
+
+#define READY_POLL_US 80
+#define READY_POLL_US_GRAN 1
+#define READY_POLL_MS 100
+#define READY_POLL_MS_GRAN 10
+
+/**
+ * struct busy_signal_statistics - spi busy signal statistics
+ * @while_busy_ext: how many times while_busy loop been waited
+ * @while_busy_fail: how many times while_busy been timed out
+ * @until_busy_ext: how many times until_busy loop been waited
+ * @until_busy_fail: how many times until_busy been timed out
+ * @force_started: how many times of force started
+ * @force_started_failure: how many times of force started failure
+ * @ready_failure: how many times of ready failure
+ */
+struct busy_signal_statistics {
+ u32 while_busy_ext;
+ u32 while_busy_fail;
+ u32 until_busy_ext;
+ u32 until_busy_fail;
+ u32 force_started;
+ u32 force_started_failure;
+ u32 ready_failure;
+};
+
+/**
+ * struct companion_spi_priv - companion-spi private data structure
+ * @spi: address of spi device
+ * @task: address of task struct
+ * @wait: wait queue head
+ * @gpiod_request: gpio line connect to request signal
+ * @gpiod_busy: gpio line connect to busy signal
+ * @gpiod_cs: gpio line connect to cs signal
+ * @dump_packet: flag to control dump spi packet
+ * @stats: spi busy signal statistics
+ * @pm: companion protocol manager
+ */
+struct companion_spi_priv {
+ struct spi_device *spi;
+ struct task_struct *task;
+ wait_queue_head_t wait;
+
+ struct gpio_desc *gpiod_request;
+ struct gpio_desc *gpiod_busy;
+ struct gpio_desc *gpiod_cs;
+
+ bool dump_packets;
+ struct busy_signal_statistics stats;
+ struct companion_protocol_manager pm;
+};
+
+/**
+ * companion_io_ops_register() - register companion IO packets handler
+ * @parent: address of the parent device
+ * @ops: address of the IO callbacks
+ * @data: address of the data passed to the IO callbacks
+ */
+int companion_io_ops_register(struct device *parent,
+ struct companion_io_ops *ops,
+ void *data)
+{
+ struct companion_spi_priv *priv = dev_get_drvdata(parent);
+
+ return pm_io_ops_register(&priv->pm, ops, data);
+}
+EXPORT_SYMBOL_GPL(companion_io_ops_register);
+
+/**
+ * companion_io_ops_unregister() - unregister companion IO packets handler
+ * @parent: address of the parent device
+ */
+int companion_io_ops_unregister(struct device *parent)
+{
+ struct companion_spi_priv *priv = dev_get_drvdata(parent);
+
+ return pm_io_ops_unregister(&priv->pm);
+}
+EXPORT_SYMBOL_GPL(companion_io_ops_unregister);
+
+/**
+ * companion_can_ops_register() - register companion CAN packets handler
+ * @parent: address of the parent device
+ * @port: which CAN port to register
+ * @ops: address of the CAN callbacks
+ * @data: address of the data passed to the CAN callbacks
+ */
+int companion_can_ops_register(struct device *parent,
+ u8 port,
+ struct companion_can_ops *ops,
+ void *data)
+{
+ struct companion_spi_priv *priv = dev_get_drvdata(parent);
+
+ return pm_can_ops_register(&priv->pm, port, ops, data);
+}
+EXPORT_SYMBOL_GPL(companion_can_ops_register);
+
+/**
+ * companion_can_ops_unregister() - unregister companion CAN packets handler
+ * @parent: address of the parent device
+ * @port: which CAN port to unregister
+ */
+int companion_can_ops_unregister(struct device *parent, u8 port)
+{
+ struct companion_spi_priv *priv = dev_get_drvdata(parent);
+
+ return pm_can_ops_unregister(&priv->pm, port);
+}
+EXPORT_SYMBOL_GPL(companion_can_ops_unregister);
+
+/**
+ * companion_io_txq_is_full() - return true if IO tx queue is full
+ * @parent: address of the parent device
+ */
+bool companion_io_txq_is_full(struct device *parent)
+{
+ struct companion_spi_priv *priv = dev_get_drvdata(parent);
+
+ return qm_io_txq_is_full(&priv->pm.qm);
+}
+EXPORT_SYMBOL_GPL(companion_io_txq_is_full);
+
+/**
+ * companion_io_rxq_is_empty() - return true if IO rx queue is empty
+ * @parent: address of the parent device
+ */
+bool companion_io_rxq_is_empty(struct device *parent)
+{
+ struct companion_spi_priv *priv = dev_get_drvdata(parent);
+
+ return qm_io_rxq_is_empty(&priv->pm.qm);
+}
+EXPORT_SYMBOL_GPL(companion_io_rxq_is_empty);
+
+/**
+ * companion_do_io_tx() - send IO packet
+ * @parent: address of the parent device
+ * @buf: address of the user space buffer to send
+ * @count: number of bytes to copy
+ */
+int companion_do_io_tx(struct device *parent,
+ const char __user *buf,
+ size_t count)
+{
+ struct companion_spi_priv *priv = dev_get_drvdata(parent);
+ unsigned int copied;
+ int err;
+ struct companion_packet p;
+
+ if (copy_from_user(p.data, buf, sizeof(p))) {
+ dev_err(parent, "copy from user not succeed in one call\n");
+ return -EFAULT;
+ }
+
+ if (is_can_type(&p))
+ return -EINVAL;
+
+ err = qm_io_txq_in(&priv->pm.qm, buf, count, &copied);
+ if (err) {
+ priv->pm.stats.io_tx_overflows++;
+ return err;
+ }
+
+ wake_up_interruptible(&priv->wait);
+ priv->pm.stats.io_tx++;
+ return copied;
+}
+EXPORT_SYMBOL_GPL(companion_do_io_tx);
+
+/**
+ * companion_do_io_rx() - receive IO packet
+ * @parent: address of the parent device
+ * @buf: address of the user space buffer to receive
+ * @count: number of bytes to copy
+ */
+int companion_do_io_rx(struct device *parent,
+ char __user *buf,
+ size_t count)
+{
+ struct companion_spi_priv *priv = dev_get_drvdata(parent);
+ unsigned int copied;
+ int err;
+
+ err = qm_io_rxq_out(&priv->pm.qm, buf, count, &copied);
+ return err ? err : copied;
+}
+EXPORT_SYMBOL_GPL(companion_do_io_rx);
+
+/**
+ * companion_do_can_tx() - send CAN packet
+ * @parent: address of the parent device
+ * @port: which CAN port to send
+ * @prio: priority of the CAN frame
+ * @cf: address of the CAN frame to send
+ */
+int companion_do_can_tx(struct device *parent,
+ u8 port,
+ u8 prio,
+ const struct can_frame *cf)
+{
+ struct companion_spi_priv *priv = dev_get_drvdata(parent);
+ int err;
+
+ err = pm_can_data_tx(&priv->pm, port, prio, cf);
+ if (err)
+ return err;
+
+ wake_up_interruptible(&priv->wait);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(companion_do_can_tx);
+
+/**
+ * companion_do_can_rx() - receive CAN packet
+ * @parent: address of the parent device
+ * @port: which CAN port to receive
+ * @cf: address of the CAN frame to receive
+ */
+int companion_do_can_rx(struct device *parent,
+ u8 port,
+ struct can_frame *cf)
+{
+ struct companion_spi_priv *priv = dev_get_drvdata(parent);
+
+ return pm_can_data_rx(&priv->pm, port, cf);
+}
+EXPORT_SYMBOL_GPL(companion_do_can_rx);
+
+/**
+ * companion_do_can_err() - receive CAN error packet
+ * @parent: address of the parent device
+ * @port: which CAN port to receive
+ * @bec: address to store CAN error counter
+ * @state: address to store CAN state
+ * @code: address to store CAN error code
+ */
+int companion_do_can_err(struct device *parent,
+ u8 port,
+ struct can_berr_counter *bec,
+ u8 *state,
+ u8 *code)
+{
+ struct companion_spi_priv *priv = dev_get_drvdata(parent);
+
+ return pm_can_err(&priv->pm, port, bec, state, code);
+}
+EXPORT_SYMBOL_GPL(companion_do_can_err);
+
+/**
+ * companion_do_set_can_bittiming() - set CAN bittiming
+ * @parent: address of the parent device
+ * @port: which CAN port to set
+ * @bittiming: address of the bittiming to set
+ */
+int companion_do_set_can_bittiming(struct device *parent,
+ u8 port,
+ const struct can_bittiming *bittiming)
+{
+ struct companion_spi_priv *priv = dev_get_drvdata(parent);
+ int err;
+
+ err = pm_can_set_bittiming(&priv->pm, port, bittiming);
+ if (err)
+ return err;
+
+ wake_up_interruptible(&priv->wait);
+ return pm_wait_for_response(&priv->pm, port, bcp_can_bittiming);
+}
+EXPORT_SYMBOL_GPL(companion_do_set_can_bittiming);
+
+/**
+ * companion_do_set_can_mode() - set CAN mode
+ * @parent: address of the parent device
+ * @port: which CAN port to set
+ * @mode: the CAN mode to set
+ */
+int companion_do_set_can_mode(struct device *parent,
+ u8 port,
+ enum can_mode mode)
+{
+ struct companion_spi_priv *priv = dev_get_drvdata(parent);
+ int err;
+
+ err = pm_can_set_mode(&priv->pm, port, mode);
+ if (err)
+ return err;
+
+ wake_up_interruptible(&priv->wait);
+ return pm_wait_for_response(&priv->pm, port, bcp_can_mode);
+}
+EXPORT_SYMBOL_GPL(companion_do_set_can_mode);
+
+/**
+ * companion_do_set_can_ctrlmode() - set CAN control mode
+ * @parent: address of the parent device
+ * @port: which CAN port to set
+ * @ctrl: the CAN control mode to set
+ */
+int companion_do_set_can_ctrlmode(struct device *parent,
+ u8 port,
+ u32 ctrl)
+{
+ struct companion_spi_priv *priv = dev_get_drvdata(parent);
+ int err;
+
+ err = pm_can_set_ctrlmode(&priv->pm, port, ctrl);
+ if (err)
+ return err;
+
+ wake_up_interruptible(&priv->wait);
+ return pm_wait_for_response(&priv->pm, port, bcp_can_mode);
+}
+EXPORT_SYMBOL_GPL(companion_do_set_can_ctrlmode);
+
+/**
+ * companion_do_get_can_status() - get CAN status
+ * @parent: address of the parent device
+ * @port: which CAN port to receive
+ * @bec: address of the CAN error counter to store
+ */
+int companion_do_get_can_status(struct device *parent,
+ u8 port,
+ struct can_berr_counter *bec)
+{
+ struct companion_spi_priv *priv = dev_get_drvdata(parent);
+ int err;
+
+ err = pm_can_get_status(&priv->pm, port);
+ if (err)
+ return err;
+
+ wake_up_interruptible(&priv->wait);
+ err = pm_wait_for_response(&priv->pm, port, bcp_can_status);
+ if (err)
+ return err;
+
+ bec->rxerr = priv->pm.rx_err[port];
+ bec->txerr = priv->pm.tx_err[port];
+ return 0;
+}
+EXPORT_SYMBOL_GPL(companion_do_get_can_status);
+
+/**
+ * companion_do_get_can_txq_status() - get single CAN tx queue status
+ * @parent: address of the parent device
+ * @port: which CAN port to inquiry
+ * @prio: which CAN queue to inquiry
+ * @lost_txq_sync: address of flag to store whether tx queue lost sync
+ */
+int companion_do_get_can_txq_status(struct device *parent,
+ u8 port,
+ u8 prio,
+ bool *lost_txq_sync)
+{
+ struct companion_spi_priv *priv = dev_get_drvdata(parent);
+ struct companion_protocol_manager *pm = &priv->pm;
+ u8 local, remote;
+ int err;
+
+ if (prio >= BCP_CAN_PRIOS)
+ return -EINVAL;
+
+ err = pm_can_get_txq_status(pm, port);
+ if (err)
+ return err;
+
+ wake_up_interruptible(&priv->wait);
+ err = pm_wait_for_response(pm, port, bcp_can_txq_status);
+ if (err)
+ return err;
+
+ local = pm->local_txq[port][prio];
+ remote = pm->remote_txq[port][prio];
+
+ if (local != remote) {
+ *lost_txq_sync = true;
+ pm->stats.can_lost_txq_sync[port][prio]++;
+ } else {
+ *lost_txq_sync = false;
+ pm->stats.can_ack_timeout[port][prio]++;
+ }
+
+ pm->local_txq[port][prio] = remote;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(companion_do_get_can_txq_status);
+
+/**
+ * companion_do_get_can_txq_status_all() - get all CAN tx queue status
+ * @parent: address of the parent device
+ * @port: which CAN port to inquiry
+ */
+int companion_do_get_can_txq_status_all(struct device *parent, u8 port)
+{
+ struct companion_spi_priv *priv = dev_get_drvdata(parent);
+ int err;
+
+ err = pm_can_get_txq_status(&priv->pm, port);
+ if (err)
+ return err;
+
+ wake_up_interruptible(&priv->wait);
+ err = pm_wait_for_response(&priv->pm, port, bcp_can_txq_status);
+ if (err)
+ return err;
+
+ memcpy(priv->pm.local_txq[port],
+ priv->pm.remote_txq[port],
+ BCP_CAN_PRIOS);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(companion_do_get_can_txq_status_all);
+
+/**
+ * companion_do_can_txq_is_full() - inquiry CAN tx queue is full
+ * @parent: address of the parent device
+ * @port: which CAN port to inquiry
+ * @prio: which CAN queue to inquiry
+ * @is_full: address of flag to store is full or not
+ */
+int companion_do_can_txq_is_full(struct device *parent,
+ u8 port,
+ u8 prio,
+ bool *is_full)
+{
+ struct companion_spi_priv *priv = dev_get_drvdata(parent);
+
+ return pm_can_txq_is_full(&priv->pm, port, prio, is_full);
+}
+EXPORT_SYMBOL_GPL(companion_do_can_txq_is_full);
+
+/**
+ * companion_do_can_txq_has_space() - inquiry CAN tx queue has space
+ * @parent: address of the parent device
+ * @port: which CAN port to inquiry
+ * @prio: which CAN queue to inquiry
+ * @has_space: address of flag to store has space or not
+ */
+int companion_do_can_txq_has_space(struct device *parent,
+ u8 port,
+ u8 prio,
+ bool *has_space)
+{
+ struct companion_spi_priv *priv = dev_get_drvdata(parent);
+
+ return pm_can_txq_has_space(&priv->pm, port, prio, has_space);
+}
+EXPORT_SYMBOL_GPL(companion_do_can_txq_has_space);
+
+/**
+ * companion_do_can_start_tx_timer() - start CAN tx timeout detection
+ * @parent: address of the parent device
+ * @port: which CAN port to start
+ * @prio: which CAN queue to start
+ */
+int companion_do_can_start_tx_timer(struct device *parent,
+ u8 port,
+ u8 prio)
+{
+ struct companion_spi_priv *priv = dev_get_drvdata(parent);
+
+ return pm_can_start_tx_timer(&priv->pm, port, prio);
+}
+EXPORT_SYMBOL_GPL(companion_do_can_start_tx_timer);
+
+/**
+ * companion_do_can_stop_tx_timer() - stop CAN tx timeout detection
+ * @parent: address of the parent device
+ * @port: which CAN port to stop
+ * @prio: which CAN queue to stop
+ */
+int companion_do_can_stop_tx_timer(struct device *parent,
+ u8 port,
+ u8 prio)
+{
+ struct companion_spi_priv *priv = dev_get_drvdata(parent);
+
+ return pm_can_stop_tx_timer(&priv->pm, port, prio);
+}
+EXPORT_SYMBOL_GPL(companion_do_can_stop_tx_timer);
+
+/**
+ * dump_packets_show() - display dump_packets value in sysfs entry
+ * @dev: address of the device associated with sysfs entry
+ * @attr: address of the device attribute
+ * @buf: address of the buffer to encode value
+ */
+static ssize_t dump_packets_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct companion_spi_priv *priv = spi_get_drvdata(spi);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", priv->dump_packets);
+}
+
+/**
+ * dump_packets_store() - store dump_packets value from sysfs entry
+ * @dev: address of the device associated with sysfs entry
+ * @attr: address of the device attribute
+ * @buf: address of the buffer to decode value
+ * @count: number of bytes in the buffer
+ */
+static ssize_t dump_packets_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct companion_spi_priv *priv = spi_get_drvdata(spi);
+ int err;
+
+ err = kstrtobool(buf, &priv->dump_packets);
+ if (err) {
+ dev_err(&spi->dev, "input invalid value: %s\n", buf);
+ return err;
+ }
+
+ return count;
+}
+static DEVICE_ATTR_RW(dump_packets);
+
+/**
+ * overflows_show() - display overflows value in sysfs entry
+ * @dev: address of the device associated with sysfs entry
+ * @attr: address of the device attribute
+ * @buf: address of the buffer to encode value
+ */
+static ssize_t overflows_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct companion_spi_priv *priv = spi_get_drvdata(spi);
+ int ret, pos, i, j, total = 0;
+
+ ret = snprintf(buf, PAGE_SIZE, "io\ntx: %u, rx: %u\n\n",
+ priv->pm.stats.io_tx_overflows,
+ priv->pm.stats.io_rx_overflows);
+ pos = ret;
+
+ for (i = 0; i < BCP_CAN_PORTS; ++i) {
+ ret = snprintf(buf + pos, PAGE_SIZE - pos, "can%u\n", i);
+ pos += ret;
+
+ for (j = 0; j < BCP_CAN_PRIOS; ++j) {
+ ret = snprintf(buf + pos, PAGE_SIZE - pos,
+ "[%u]:%u ", j,
+ priv->pm.stats.can_tx_overflows[i][j]);
+ total += priv->pm.stats.can_tx_overflows[i][j];
+ pos += ret;
+ }
+
+ ret = snprintf(buf + pos, PAGE_SIZE - pos,
+ "\ntx: %u, rx: %u, err: %u\n\n",
+ total,
+ priv->pm.stats.can_rx_overflows[i],
+ priv->pm.stats.can_err_overflows[i]);
+ pos += ret;
+ }
+ return pos;
+}
+static DEVICE_ATTR_RO(overflows);
+
+/**
+ * traffic_show() - display traffic of IO and CAN in sysfs entry
+ * @dev: address of the device associated with sysfs entry
+ * @attr: address of the device attribute
+ * @buf: address of the buffer to encode value
+ */
+static ssize_t traffic_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct companion_spi_priv *priv = spi_get_drvdata(spi);
+ int ret, pos, i, j;
+
+ ret = snprintf(buf, PAGE_SIZE, "io\ntx: %u, rx: %u\n\n",
+ priv->pm.stats.io_tx, priv->pm.stats.io_rx);
+ pos = ret;
+
+ for (i = 0; i < BCP_CAN_PORTS; ++i) {
+ ret = snprintf(buf + pos, PAGE_SIZE - pos, "can%u\n", i);
+ pos += ret;
+
+ ret = snprintf(buf + pos, PAGE_SIZE - pos, "tx : ");
+ pos += ret;
+ for (j = 0; j < BCP_CAN_PRIOS; ++j) {
+ ret = snprintf(buf + pos, PAGE_SIZE - pos,
+ "[%u]:%u ", j,
+ priv->pm.stats.can_tx[i][j]);
+ pos += ret;
+ }
+
+ ret = snprintf(buf + pos, PAGE_SIZE - pos, "\nack success: ");
+ pos += ret;
+ for (j = 0; j < BCP_CAN_PRIOS; ++j) {
+ ret = snprintf(buf + pos, PAGE_SIZE - pos,
+ "[%u]:%u ", j,
+ priv->pm.stats.can_ack_success[i][j]);
+ pos += ret;
+ }
+
+ ret = snprintf(buf + pos, PAGE_SIZE - pos, "\nack failure: ");
+ pos += ret;
+ for (j = 0; j < BCP_CAN_PRIOS; ++j) {
+ ret = snprintf(buf + pos, PAGE_SIZE - pos,
+ "[%u]:%u ", j,
+ priv->pm.stats.can_ack_failure[i][j]);
+ pos += ret;
+ }
+
+ ret = snprintf(buf + pos, PAGE_SIZE - pos, "\nlost seq : ");
+ pos += ret;
+ for (j = 0; j < BCP_CAN_PRIOS; ++j) {
+ ret = snprintf(buf + pos, PAGE_SIZE - pos,
+ "[%u]:%u ", j,
+ priv->pm.stats.can_lost_seq_sync[i][j]);
+ pos += ret;
+ }
+
+ ret = snprintf(buf + pos, PAGE_SIZE - pos, "\nlost txq : ");
+ pos += ret;
+ for (j = 0; j < BCP_CAN_PRIOS; ++j) {
+ ret = snprintf(buf + pos, PAGE_SIZE - pos,
+ "[%u]:%u ", j,
+ priv->pm.stats.can_lost_txq_sync[i][j]);
+ pos += ret;
+ }
+
+ ret = snprintf(buf + pos, PAGE_SIZE - pos, "\nack timeout: ");
+ pos += ret;
+ for (j = 0; j < BCP_CAN_PRIOS; ++j) {
+ ret = snprintf(buf + pos, PAGE_SIZE - pos,
+ "[%u]:%u ", j,
+ priv->pm.stats.can_ack_timeout[i][j]);
+ pos += ret;
+ }
+
+ ret = snprintf(buf + pos, PAGE_SIZE - pos, "\nack unexpect:");
+ pos += ret;
+ for (j = 0; j < BCP_CAN_PRIOS; ++j) {
+ ret = snprintf(buf + pos, PAGE_SIZE - pos,
+ "[%u]:%u ", j,
+ priv->pm.stats.can_ack_unexpect[i][j]);
+ pos += ret;
+ }
+
+ ret = snprintf(buf + pos, PAGE_SIZE - pos,
+ "\nrx : %u\nerr : %u\n\n",
+ priv->pm.stats.can_rx[i],
+ priv->pm.stats.can_err[i]);
+ pos += ret;
+ }
+ return pos;
+}
+static DEVICE_ATTR_RO(traffic);
+
+/**
+ * can_space_show() - display CAN queue space in sysfs entry
+ * @dev: address of the device associated with sysfs entry
+ * @attr: address of the device attribute
+ * @buf: address of the buffer to encode value
+ */
+static ssize_t can_space_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct companion_spi_priv *priv = spi_get_drvdata(spi);
+ int i, j, ret, pos = 0;
+
+ for (i = 0; i < BCP_CAN_PORTS; ++i) {
+ ret = snprintf(buf + pos, PAGE_SIZE - pos, "can%u\n", i);
+ pos += ret;
+
+ ret = snprintf(buf + pos, PAGE_SIZE - pos, "local : ");
+ pos += ret;
+ for (j = 0; j < BCP_CAN_PRIOS; ++j) {
+ ret = snprintf(buf + pos, PAGE_SIZE - pos,
+ "[%u]:%u ", j,
+ priv->pm.local_txq[i][j]);
+ pos += ret;
+ }
+
+ ret = snprintf(buf + pos, PAGE_SIZE - pos, "\nremote: ");
+ pos += ret;
+ for (j = 0; j < BCP_CAN_PRIOS; ++j) {
+ ret = snprintf(buf + pos, PAGE_SIZE - pos,
+ "[%u]:%u ", j,
+ priv->pm.remote_txq[i][j]);
+ pos += ret;
+ }
+
+ ret = snprintf(buf + pos, PAGE_SIZE - pos, "\n\n");
+ pos += ret;
+ }
+ return pos;
+}
+static DEVICE_ATTR_RO(can_space);
+
+/**
+ * busy_show() - display busy signal statisitics in sysfs entry
+ * @dev: address of the device associated with sysfs entry
+ * @attr: address of the device attribute
+ * @buf: address of the buffer to encode value
+ */
+static ssize_t busy_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct companion_spi_priv *priv = spi_get_drvdata(spi);
+
+ return snprintf(buf, PAGE_SIZE,
+ "while_busy_ext : %u\n"
+ "while_busy_fail : %u\n"
+ "until_busy_ext : %u\n"
+ "until_busy_fail : %u\n"
+ "force_started : %u\n"
+ "force_started_failure: %u\n"
+ "ready_failure : %u\n",
+ priv->stats.while_busy_ext,
+ priv->stats.while_busy_fail,
+ priv->stats.until_busy_ext,
+ priv->stats.until_busy_fail,
+ priv->stats.force_started,
+ priv->stats.force_started_failure,
+ priv->stats.ready_failure);
+}
+static DEVICE_ATTR_RO(busy);
+
+static struct attribute *companion_spi_sysfs_attrs[] = {
+ &dev_attr_dump_packets.attr,
+ &dev_attr_overflows.attr,
+ &dev_attr_traffic.attr,
+ &dev_attr_can_space.attr,
+ &dev_attr_busy.attr,
+ NULL
+};
+
+static struct attribute_group companion_spi_attribute_group = {
+ .attrs = companion_spi_sysfs_attrs
+};
+
+/**
+ * slave_has_request() - inquiry spi slave has request
+ * @priv: address of companion-spi private data
+ */
+static inline bool slave_has_request(struct companion_spi_priv *priv)
+{
+ return gpiod_get_value_cansleep(priv->gpiod_request) != 0;
+}
+
+/**
+ * slave_is_busy() - inquiry spi slave is busy
+ * @priv: address of companion-spi private data
+ */
+static inline bool slave_is_busy(struct companion_spi_priv *priv)
+{
+ return gpiod_get_value_cansleep(priv->gpiod_busy) != 0;
+}
+
+/**
+ * slave_is_not_busy() - inquiry spi slave is not busy
+ * @priv: address of companion-spi private data
+ */
+static inline bool slave_is_not_busy(struct companion_spi_priv *priv)
+{
+ return gpiod_get_value_cansleep(priv->gpiod_busy) == 0;
+}
+
+/**
+ * slave_select() - select spi slave
+ * @priv: address of companion-spi private data
+ */
+static inline void slave_select(struct companion_spi_priv *priv)
+{
+ gpiod_set_value_cansleep(priv->gpiod_cs, 1);
+}
+
+/**
+ * slave_deselect() - deselect spi slave
+ * @priv: address of companion-spi private data
+ */
+static inline void slave_deselect(struct companion_spi_priv *priv)
+{
+ gpiod_set_value_cansleep(priv->gpiod_cs, 0);
+}
+
+/**
+ * companion_spi_wait_while_busy() - wait while spi slave is busy
+ * @priv: address of companion-spi private data
+ */
+static int companion_spi_wait_while_busy(struct companion_spi_priv *priv)
+{
+ unsigned int count;
+
+ /*
+ * as short as possible wait while busy polling which shall
+ * succeed most of the times
+ */
+ count = READY_POLL_US / READY_POLL_US_GRAN;
+ do {
+ if (slave_is_not_busy(priv))
+ return 0;
+
+ udelay(READY_POLL_US_GRAN);
+ } while (--count);
+
+ /*
+ * wait while busy polling with sleeping, in case companion
+ * is busy with other things, this shall happen rarely
+ */
+ count = READY_POLL_MS / READY_POLL_MS_GRAN;
+ do {
+ if (slave_is_not_busy(priv)) {
+ priv->stats.while_busy_ext++;
+ dev_info(&priv->spi->dev,
+ "waited long while busy (%u)\n",
+ priv->stats.while_busy_ext);
+ return 0;
+ }
+
+ msleep(READY_POLL_MS_GRAN);
+ } while (--count);
+
+ priv->stats.while_busy_fail++;
+ dev_err(&priv->spi->dev,
+ "time out waiting for busy deassertion (%u)\n",
+ priv->stats.while_busy_fail);
+ return -EBUSY;
+}
+
+/**
+ * companion_spi_wait_until_busy() - wait until spi slave is busy
+ * @priv: address of companion-spi private data
+ */
+static int companion_spi_wait_until_busy(struct companion_spi_priv *priv)
+{
+ unsigned int count;
+
+ /*
+ * as short as possible wait until busy polling which shall
+ * succeed most of the times
+ */
+ count = READY_POLL_US / READY_POLL_US_GRAN;
+ do {
+ if (slave_is_busy(priv))
+ return 0;
+
+ udelay(READY_POLL_US_GRAN);
+ } while (--count);
+
+ /*
+ * wait until busy polling with sleeping, in case companion
+ * is busy with other things, this shall happen rarely
+ */
+ count = READY_POLL_MS / READY_POLL_MS_GRAN;
+ do {
+ if (slave_is_busy(priv)) {
+ priv->stats.until_busy_ext++;
+ dev_info(&priv->spi->dev,
+ "waited long until busy (%u)\n",
+ priv->stats.until_busy_ext);
+ return 0;
+ }
+
+ msleep(READY_POLL_MS_GRAN);
+ } while (--count);
+
+ priv->stats.until_busy_fail++;
+ dev_err(&priv->spi->dev,
+ "time out waiting for busy assertion (%u)\n",
+ priv->stats.until_busy_fail);
+ return -EBUSY;
+}
+
+/**
+ * companion_spi_cpu_to_be32() - convert companion packet to big endian 32 bit
+ * @buf: address of the packet to convert
+ */
+static void companion_spi_cpu_to_be32(char *buf)
+{
+ u32 *buf32 = (u32 *)buf;
+ int i;
+
+ for (i = 0; i < (BCP_PACKET_SIZE / sizeof(u32)); i++, buf32++)
+ *buf32 = cpu_to_be32(*buf32);
+}
+
+/**
+ * companion_spi_be32_to_cpu() - convert companion packet from big endian 32 bit
+ * @buf: address of the packet to convert
+ */
+static void companion_spi_be32_to_cpu(char *buf)
+{
+ u32 *buf32 = (u32 *)buf;
+ int i;
+
+ for (i = 0; i < (BCP_PACKET_SIZE / sizeof(u32)); i++, buf32++)
+ *buf32 = be32_to_cpu(*buf32);
+}
+
+/**
+ * companion_spi_transceive() - transceive spi message
+ * @priv: address of companion-spi private data
+ * @message: address of the spi message to transceive
+ * @transfer: address of the spi transfer
+ */
+static void companion_spi_transceive(struct companion_spi_priv *priv,
+ struct spi_message *message,
+ struct spi_transfer *transfer)
+{
+ const struct companion_packet *p;
+ int err;
+
+ if (priv->dump_packets) {
+ p = transfer->tx_buf;
+ dump_packet(p, KERN_INFO, DRIVER_NAME" Tx: ");
+ }
+
+ companion_spi_cpu_to_be32((char *)transfer->tx_buf);
+
+ spi_message_init_with_transfers(message, transfer, 1);
+
+ err = companion_spi_wait_while_busy(priv);
+
+ slave_select(priv);
+
+ if (err) {
+ priv->stats.force_started++;
+ dev_err(&priv->spi->dev,
+ "force started transfer (%u)\n",
+ priv->stats.force_started);
+
+ /* wait slave to pull up busy line in case force started */
+ err = companion_spi_wait_while_busy(priv);
+ if (err) {
+ priv->stats.force_started_failure++;
+ dev_err(&priv->spi->dev,
+ "force started failed, continuing (%u)\n",
+ priv->stats.force_started_failure);
+ }
+ }
+
+ err = companion_spi_wait_until_busy(priv);
+ if (err) {
+ priv->stats.ready_failure++;
+ dev_err(&priv->spi->dev,
+ "started transfer in case not ready (%u)\n",
+ priv->stats.ready_failure);
+ }
+
+ err = spi_sync(priv->spi, message);
+ if (err)
+ dev_err(&priv->spi->dev,
+ "sending spi message failed: %d\n",
+ message->status);
+
+ slave_deselect(priv);
+
+ companion_spi_be32_to_cpu(transfer->rx_buf);
+
+ if (priv->dump_packets) {
+ p = transfer->rx_buf;
+ dump_packet(p, KERN_INFO, DRIVER_NAME" Rx: ");
+ }
+}
+
+/**
+ * companion_spi_request_irq() - irq handler of request signal
+ * @irq: irq number of request signal
+ * @data: address of user supplied data for irq handler
+ */
+static irqreturn_t companion_spi_request_irq(int irq, void *data)
+{
+ struct companion_spi_priv *priv = data;
+
+ wake_up_interruptible(&priv->wait);
+ return IRQ_HANDLED;
+}
+
+/**
+ * companion_spi_thread() - main thread to drive spi communication
+ * @data: address of user supplied data for thread
+ */
+static int companion_spi_thread(void *data)
+{
+ struct companion_spi_priv *priv = data;
+ struct companion_packet tx_packet;
+ struct companion_packet rx_packet;
+ struct spi_message message;
+ struct spi_transfer transfer;
+
+ memset(&transfer, 0, sizeof(transfer));
+ transfer.tx_buf = tx_packet.data;
+ transfer.rx_buf = rx_packet.data;
+ transfer.len = sizeof(struct companion_packet);
+ transfer.cs_change = 0;
+ transfer.bits_per_word = 32;
+
+ do {
+ if (wait_event_interruptible(priv->wait,
+ kthread_should_stop() ||
+ slave_has_request(priv) ||
+ qm_has_tx_data(&priv->pm.qm)))
+ continue;
+
+ if (kthread_should_stop())
+ break;
+
+ pm_prepare_tx(&priv->pm, &tx_packet);
+ companion_spi_transceive(priv, &message, &transfer);
+ pm_on_tx_done(&priv->pm);
+ pm_on_rx_done(&priv->pm, &rx_packet);
+ } while (!kthread_should_stop());
+
+ return 0;
+}
+
+static const struct of_device_id companion_spi_of_match[] = {
+ { .compatible = "bosch,companion-spi", .data = NULL, },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, companion_spi_of_match);
+
+/**
+ * companion_spi_parse_dt() - parse device tree
+ * @priv: address of companion-spi private data
+ */
+static int companion_spi_parse_dt(struct companion_spi_priv *priv)
+{
+ struct device *dev = &priv->spi->dev;
+ struct device_node *np = dev->of_node;
+ int err;
+
+ if (!np) {
+ dev_err(dev, "no device tree data\n");
+ return -EINVAL;
+ }
+
+ priv->gpiod_request = devm_gpiod_get(dev, "request", GPIOD_IN);
+ if (IS_ERR(priv->gpiod_request)) {
+ err = PTR_ERR(priv->gpiod_request);
+ if (err != -EPROBE_DEFER)
+ dev_err(dev, "invalid 'request-gpios':%d\n", err);
+ return err;
+ }
+
+ priv->gpiod_busy = devm_gpiod_get(dev, "busy", GPIOD_IN);
+ if (IS_ERR(priv->gpiod_busy)) {
+ err = PTR_ERR(priv->gpiod_busy);
+ if (err != -EPROBE_DEFER)
+ dev_err(dev, "invalid 'busy-gpios':%d\n", err);
+ return err;
+ }
+
+ priv->gpiod_cs = devm_gpiod_get(dev, "cs", GPIOD_OUT_HIGH);
+ if (IS_ERR(priv->gpiod_cs)) {
+ err = PTR_ERR(priv->gpiod_cs);
+ if (err != -EPROBE_DEFER)
+ dev_err(dev, "invalid 'cs-gpios':%d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+/**
+ * companion_spi_probe() - probe callback
+ * @spi: address of the spi device
+ */
+static int companion_spi_probe(struct spi_device *spi)
+{
+ struct companion_spi_priv *priv;
+ u8 null_packet[BCP_PACKET_SIZE] = {0};
+ int err;
+
+ priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->spi = spi;
+ init_waitqueue_head(&priv->wait);
+ pm_init(&priv->pm);
+
+ err = companion_spi_parse_dt(priv);
+ if (err)
+ return err;
+
+ spi->mode = SPI_MODE_1;
+
+ err = spi_setup(spi);
+ if (err) {
+ dev_err(&spi->dev, "spi_setup() returns: %d\n", err);
+ return err;
+ }
+
+ err = spi_write(spi, null_packet, sizeof(null_packet));
+ if (err) {
+ dev_err(&spi->dev, "dummy transfer failed: %d\n", err);
+ return err;
+ }
+
+ spi_set_drvdata(spi, priv);
+
+ err = sysfs_create_group(&spi->dev.kobj,
+ &companion_spi_attribute_group);
+ if (err) {
+ dev_err(&spi->dev, "sysfs_create_group() returns: %d\n", err);
+ return err;
+ }
+
+ priv->task = kthread_run(companion_spi_thread, priv, DRIVER_NAME);
+ if (!priv->task)
+ return -EIO;
+
+ err = devm_request_irq(&spi->dev,
+ gpiod_to_irq(priv->gpiod_request),
+ companion_spi_request_irq,
+ IRQF_TRIGGER_FALLING,
+ "companion-spi-request",
+ priv);
+ if (err)
+ return -ENODEV;
+
+ return of_platform_populate(spi->dev.of_node, NULL, NULL, &spi->dev);
+}
+
+/**
+ * companion_spi_remove() - remove callback
+ * @spi: address of the spi device
+ */
+static int companion_spi_remove(struct spi_device *spi)
+{
+ struct companion_spi_priv *priv = spi_get_drvdata(spi);
+
+ qm_reset(&priv->pm.qm);
+ kthread_stop(priv->task);
+ sysfs_remove_group(&spi->dev.kobj, &companion_spi_attribute_group);
+ of_platform_depopulate(&spi->dev);
+ return 0;
+}
+
+static struct spi_driver companion_spi_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = of_match_ptr(companion_spi_of_match),
+ },
+ .probe = companion_spi_probe,
+ .remove = companion_spi_remove,
+};
+module_spi_driver(companion_spi_driver);
+
+MODULE_AUTHOR("Zhu Yi <yi.zhu5@cn.bosch.com>");
+MODULE_DESCRIPTION("Companion low level init/core code");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/companion/protocol-manager.c b/drivers/spi/companion/protocol-manager.c
new file mode 100644
index 0000000..1b09c27
--- /dev/null
+++ b/drivers/spi/companion/protocol-manager.c
@@ -0,0 +1,1032 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Companion protocol manager code
+ *
+ * Copyright (C) 2015-2018 Bosch Sicherheitssysteme GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "protocol-manager.h"
+
+#define PM_RESPONSE_TIMEOUT HZ
+#define PM_CAN_TX_TIMEOUT msecs_to_jiffies(30000)
+
+/**
+ * struct companion_filter - companion packet filter
+ * @node: filter list node
+ * @match: address of match callback
+ * @process: address of process callback
+ */
+struct companion_filter {
+ struct list_head node;
+ bool (*match)(const struct companion_packet *p);
+ void (*process)(struct companion_protocol_manager *pm,
+ const struct companion_packet *p);
+};
+
+/**
+ * null_match() - match null packet
+ * @p: address of the packet to handle
+ */
+static bool null_match(const struct companion_packet *p)
+{
+ return is_null_type(p);
+}
+
+/**
+ * io_match() - match IO packet
+ * @p: address of the packet to handle
+ */
+static bool io_match(const struct companion_packet *p)
+{
+ return is_io_type(p);
+}
+
+/**
+ * io_process() - process IO packet
+ * @pm: address of the protocol manager
+ * @p: address of the packet to handle
+ */
+static void io_process(struct companion_protocol_manager *pm,
+ const struct companion_packet *p)
+{
+ if (qm_io_rxq_in(&pm->qm, p)) {
+ down_read(&pm->io_lock);
+ if (pm->io_ops && pm->io_ops->on_rx_done)
+ pm->io_ops->on_rx_done(pm->io_data);
+ up_read(&pm->io_lock);
+
+ pm->stats.io_rx++;
+ } else {
+ pm->stats.io_rx_overflows++;
+ }
+}
+
+/**
+ * can_data_match() - match CAN data packet
+ * @p: address of the packet to handle
+ */
+static bool can_data_match(const struct companion_packet *p)
+{
+ return ((const struct can_data_frame *)p)->type == BCP_CAN_DATA;
+}
+
+/**
+ * can_data_process() - process CAN data packet
+ * @pm: address of the protocol manager
+ * @p: address of the packet to handle
+ */
+static void can_data_process(struct companion_protocol_manager *pm,
+ const struct companion_packet *p)
+{
+ u8 port = ((const struct can_data_frame *)p)->port - 1;
+
+ if (port >= BCP_CAN_PORTS)
+ return;
+
+ if (qm_can_rxq_in(&pm->qm, p, port)) {
+ down_read(&pm->can_lock[port]);
+ if (pm->can_ops[port] && pm->can_ops[port]->on_rx_done)
+ pm->can_ops[port]->on_rx_done(pm->can_data[port]);
+ up_read(&pm->can_lock[port]);
+
+ pm->stats.can_rx[port]++;
+ } else {
+ pm->stats.can_rx_overflows[port]++;
+ }
+}
+
+/**
+ * can_bittiming_match() - match CAN bittiming packet
+ * @p: address of the packet to handle
+ */
+static bool can_bittiming_match(const struct companion_packet *p)
+{
+ return ((const struct can_bittiming_response *)p)->type ==
+ BCP_CAN_BITTIMING;
+}
+
+/**
+ * can_bittiming_process() - process CAN bittiming packet
+ * @pm: address of the protocol manager
+ * @p: address of the packet to handle
+ */
+static void can_bittiming_process(struct companion_protocol_manager *pm,
+ const struct companion_packet *p)
+{
+ u8 port = ((const struct can_bittiming_response *)p)->port - 1;
+ u8 status = ((const struct can_bittiming_response *)p)->status;
+
+ if (port >= BCP_CAN_PORTS)
+ return;
+
+ if (status == BCP_STATUS_SUCCESS) {
+ pm->response[port][bcp_can_bittiming] = 0;
+ pm->stats.can_ack_success[port][0]++;
+ } else {
+ pm->response[port][bcp_can_bittiming] = -EINVAL;
+ pm->stats.can_ack_failure[port][0]++;
+ }
+
+ if (test_and_clear_bit(bcp_can_bittiming, &pm->flags[port]))
+ wake_up_interruptible_all(&pm->wait[port]);
+}
+
+/**
+ * can_mode_match() - match CAN mode packet
+ * @p: address of the packet to handle
+ */
+static bool can_mode_match(const struct companion_packet *p)
+{
+ return ((const struct can_mode_response *)p)->type ==
+ BCP_CAN_MODE;
+}
+
+/**
+ * can_mode_process() - process CAN mode packet
+ * @pm: address of the protocol manager
+ * @p: address of the packet to handle
+ */
+static void can_mode_process(struct companion_protocol_manager *pm,
+ const struct companion_packet *p)
+{
+ u8 port = ((const struct can_mode_response *)p)->port - 1;
+ u8 status = ((const struct can_mode_response *)p)->status;
+
+ if (port >= BCP_CAN_PORTS)
+ return;
+
+ if (status == BCP_STATUS_SUCCESS) {
+ pm->response[port][bcp_can_mode] = 0;
+ pm->stats.can_ack_success[port][0]++;
+ } else {
+ pm->response[port][bcp_can_mode] = -EINVAL;
+ pm->stats.can_ack_failure[port][0]++;
+ }
+
+ if (test_and_clear_bit(bcp_can_mode, &pm->flags[port]))
+ wake_up_interruptible_all(&pm->wait[port]);
+}
+
+/**
+ * can_status_match() - match CAN status packet
+ * @p: address of the packet to handle
+ */
+static bool can_status_match(const struct companion_packet *p)
+{
+ return ((const struct can_status_response *)p)->type ==
+ BCP_CAN_STATUS;
+}
+
+/**
+ * can_status_process() - process CAN status packet
+ * @pm: address of the protocol manager
+ * @p: address of the packet to handle
+ */
+static void can_status_process(struct companion_protocol_manager *pm,
+ const struct companion_packet *p)
+{
+ u8 port = ((const struct can_status_response *)p)->port - 1;
+ u8 rx_err = ((const struct can_status_response *)p)->rx_err;
+ u8 tx_err = ((const struct can_status_response *)p)->tx_err;
+ u8 status = ((const struct can_status_response *)p)->status;
+
+ if (port >= BCP_CAN_PORTS)
+ return;
+
+ if (status == BCP_STATUS_SUCCESS) {
+ pm->response[port][bcp_can_status] = 0;
+ pm->rx_err[port] = rx_err;
+ pm->tx_err[port] = tx_err;
+
+ if (test_bit(bcp_can_status, &pm->flags[port])) {
+ pm->stats.can_ack_success[port][0]++;
+ goto polling_out;
+ }
+
+ if (qm_can_err_in(&pm->qm, p, port)) {
+ down_read(&pm->can_lock[port]);
+ if (pm->can_ops[port] && pm->can_ops[port]->on_error)
+ pm->can_ops[port]->on_error(pm->can_data[port]);
+ up_read(&pm->can_lock[port]);
+
+ pm->stats.can_err[port]++;
+ } else {
+ pm->stats.can_err_overflows[port]++;
+ }
+ } else {
+ pm->response[port][bcp_can_status] = -EINVAL;
+ if (test_bit(bcp_can_status, &pm->flags[port]))
+ pm->stats.can_ack_failure[port][0]++;
+ }
+
+polling_out:
+ if (test_and_clear_bit(bcp_can_status, &pm->flags[port]))
+ wake_up_interruptible_all(&pm->wait[port]);
+}
+
+/**
+ * can_tx_ack_match() - match CAN tx acknowledge packet
+ * @p: address of the packet to handle
+ */
+static bool can_tx_ack_match(const struct companion_packet *p)
+{
+ return ((const struct can_tx_acknowledge *)p)->type ==
+ BCP_CAN_TX_ACK;
+}
+
+/**
+ * can_tx_ack_process() - process CAN tx acknowledge packet
+ * @pm: address of the protocol manager
+ * @p: address of the packet to handle
+ */
+static void can_tx_ack_process(struct companion_protocol_manager *pm,
+ const struct companion_packet *p)
+{
+ u8 port = ((const struct can_tx_acknowledge *)p)->port - 1;
+ u8 prio = ((const struct can_tx_acknowledge *)p)->prio;
+ u8 sequence = ((const struct can_tx_acknowledge *)p)->sequence;
+ u8 status = ((const struct can_tx_acknowledge *)p)->status;
+ u8 space = ((const struct can_tx_acknowledge *)p)->space;
+ bool lost_seq = false;
+
+ if (port >= BCP_CAN_PORTS || prio >= BCP_CAN_PRIOS)
+ return;
+
+ /* local_txq will be decreased after kernel sent data to companion,
+ * remote_txq will be increased after companion send ack to kernel,
+ * so local_txq < remote_txq should be guaranteed. Otherwise, kernel
+ * received unexpected ack, hence ignore it.
+ */
+ pm->remote_txq[port][prio] = space;
+ if (pm->local_txq[port][prio] >= space) {
+ pm->stats.can_ack_unexpect[port][prio]++;
+ return;
+ }
+
+ pm->local_txq[port][prio]++;
+ pm->sequence[port][prio]++;
+ if (pm->sequence[port][prio] != sequence) {
+ lost_seq = true;
+ pm->sequence[port][prio] = sequence;
+ pm->stats.can_lost_seq_sync[port][prio]++;
+ }
+
+ down_read(&pm->can_lock[port]);
+ if (pm->can_ops[port] && pm->can_ops[port]->on_tx_done)
+ pm->can_ops[port]->on_tx_done(pm->can_data[port],
+ prio,
+ lost_seq,
+ status == BCP_STATUS_SUCCESS);
+ up_read(&pm->can_lock[port]);
+
+ if (status == BCP_STATUS_SUCCESS)
+ pm->stats.can_ack_success[port][prio]++;
+ else
+ pm->stats.can_ack_failure[port][prio]++;
+}
+
+/**
+ * can_txq_status_match() - match CAN tx queue status packet
+ * @p: address of the packet to handle
+ */
+static bool can_txq_status_match(const struct companion_packet *p)
+{
+ return ((const struct can_txq_status_response *)p)->type ==
+ BCP_CAN_TX_QUEUE_STATUS;
+}
+
+/**
+ * can_txq_status_process() - process CAN tx queue status packet
+ * @pm: address of the protocol manager
+ * @p: address of the packet to handle
+ */
+static void can_txq_status_process(struct companion_protocol_manager *pm,
+ const struct companion_packet *p)
+{
+ u8 port = ((const struct can_txq_status_response *)p)->port - 1;
+ const u8 *space = ((const struct can_txq_status_response *)p)->space;
+ u8 status = ((const struct can_txq_status_response *)p)->status;
+
+ if (port >= BCP_CAN_PORTS)
+ return;
+
+ if (status == BCP_STATUS_SUCCESS) {
+ memcpy(pm->remote_txq[port], space, BCP_CAN_PRIOS);
+ pm->response[port][bcp_can_txq_status] = 0;
+ pm->stats.can_ack_success[port][0]++;
+ } else {
+ pm->response[port][bcp_can_txq_status] = -EINVAL;
+ pm->stats.can_ack_failure[port][0]++;
+ }
+
+ if (test_and_clear_bit(bcp_can_txq_status, &pm->flags[port]))
+ wake_up_interruptible_all(&pm->wait[port]);
+}
+
+/**
+ * unknown_match() - match unknown packet
+ * @p: address of the packet to handle
+ */
+static bool unknown_match(const struct companion_packet *p)
+{
+ return true;
+}
+
+/**
+ * unknown_process() - process unknown packet
+ * @pm: address of the protocol manager
+ * @p: address of the packet to handle
+ */
+static void unknown_process(struct companion_protocol_manager *pm,
+ const struct companion_packet *p)
+{
+ dump_packet(p, KERN_ERR, "Unknown packet: ");
+}
+
+static struct companion_filter null_filter = {
+ .node = LIST_HEAD_INIT(null_filter.node),
+ .match = null_match,
+ .process = NULL,
+};
+
+static struct companion_filter io_filter = {
+ .node = LIST_HEAD_INIT(io_filter.node),
+ .match = io_match,
+ .process = io_process,
+};
+
+static struct companion_filter can_data_filter = {
+ .node = LIST_HEAD_INIT(can_data_filter.node),
+ .match = can_data_match,
+ .process = can_data_process,
+};
+
+static struct companion_filter can_bittiming_filter = {
+ .node = LIST_HEAD_INIT(can_bittiming_filter.node),
+ .match = can_bittiming_match,
+ .process = can_bittiming_process,
+};
+
+static struct companion_filter can_mode_filter = {
+ .node = LIST_HEAD_INIT(can_mode_filter.node),
+ .match = can_mode_match,
+ .process = can_mode_process,
+};
+
+static struct companion_filter can_status_filter = {
+ .node = LIST_HEAD_INIT(can_status_filter.node),
+ .match = can_status_match,
+ .process = can_status_process,
+};
+
+static struct companion_filter can_tx_ack_filter = {
+ .node = LIST_HEAD_INIT(can_tx_ack_filter.node),
+ .match = can_tx_ack_match,
+ .process = can_tx_ack_process,
+};
+
+static struct companion_filter can_txq_status_filter = {
+ .node = LIST_HEAD_INIT(can_txq_status_filter.node),
+ .match = can_txq_status_match,
+ .process = can_txq_status_process,
+};
+
+static struct companion_filter unknown_filter = {
+ .node = LIST_HEAD_INIT(unknown_filter.node),
+ .match = unknown_match,
+ .process = unknown_process,
+};
+
+/**
+ * to_timer_data() - helper to access companion_timer_data in work_struct
+ * @ws: address of the work_struct object
+ */
+static struct companion_timer_data *to_timer_data(struct work_struct *ws)
+{
+ return container_of(ws, struct companion_timer_data, work);
+}
+
+/**
+ * pm_can_tx_timeout_callback() - CAN tx timeout callback
+ * @ws: address of the work_struct object
+ */
+static void pm_can_tx_timeout_callback(struct work_struct *ws)
+{
+ struct companion_timer_data *td = to_timer_data(ws);
+ struct companion_protocol_manager *pm = td->pm;
+ u8 port = td->port;
+ u8 prio = td->prio;
+
+ down_read(&pm->can_lock[port]);
+ if (pm->can_ops[port] && pm->can_ops[port]->on_tx_timeout)
+ pm->can_ops[port]->on_tx_timeout(pm->can_data[port], prio);
+ up_read(&pm->can_lock[port]);
+}
+
+/**
+ * pm_can_on_tx_timeout() - CAN tx timeout handler
+ * @tl: address of the timer_list object
+ */
+static void pm_can_on_tx_timeout(struct timer_list *tl)
+{
+ struct companion_timer *ct = from_timer(ct, tl, timer);
+
+ schedule_work(&ct->data.work);
+}
+
+#define CHECK_SIZE(x) \
+ BUILD_BUG_ON(sizeof(struct companion_packet) != sizeof(x))
+
+/**
+ * pm_init() - initialize the protocol manager
+ * @pm: address of the protocol manager to be initialized
+ */
+void pm_init(struct companion_protocol_manager *pm)
+{
+ int i;
+
+ /* sanity check for correct packet size at compile time */
+ CHECK_SIZE(struct can_data_frame);
+ CHECK_SIZE(struct can_bittiming_request);
+ CHECK_SIZE(struct can_bittiming_response);
+ CHECK_SIZE(struct can_mode_request);
+ CHECK_SIZE(struct can_mode_response);
+ CHECK_SIZE(struct can_status_request);
+ CHECK_SIZE(struct can_status_response);
+ CHECK_SIZE(struct can_tx_acknowledge);
+ CHECK_SIZE(struct can_txq_status_request);
+ CHECK_SIZE(struct can_txq_status_response);
+
+
+ init_rwsem(&pm->io_lock);
+ for (i = 0; i < BCP_CAN_PORTS; ++i) {
+ init_rwsem(&pm->can_lock[i]);
+ init_waitqueue_head(&pm->wait[i]);
+ }
+
+ qm_init(&pm->qm);
+
+ INIT_LIST_HEAD(&pm->filters);
+ list_add_tail(&null_filter.node, &pm->filters);
+ list_add_tail(&io_filter.node, &pm->filters);
+ list_add_tail(&can_data_filter.node, &pm->filters);
+ list_add_tail(&can_tx_ack_filter.node, &pm->filters);
+ list_add_tail(&can_bittiming_filter.node, &pm->filters);
+ list_add_tail(&can_mode_filter.node, &pm->filters);
+ list_add_tail(&can_status_filter.node, &pm->filters);
+ list_add_tail(&can_txq_status_filter.node, &pm->filters);
+ list_add_tail(&unknown_filter.node, &pm->filters);
+}
+
+/**
+ * pm_io_ops_register() - register companion IO packets handler
+ * @pm: address of the protocol manager to be registered
+ * @ops: address of the IO packets callback
+ * @data: address of the IO packets callback argument
+ */
+int pm_io_ops_register(struct companion_protocol_manager *pm,
+ struct companion_io_ops *ops,
+ void *data)
+{
+ int result = 0;
+
+ down_write(&pm->io_lock);
+ if (pm->io_ops) {
+ result = -EEXIST;
+ goto out;
+ }
+
+ qm_reset_io(&pm->qm);
+ pm->io_ops = ops;
+ pm->io_data = data;
+
+out:
+ up_write(&pm->io_lock);
+ return result;
+}
+
+/**
+ * pm_io_ops_unregister() - unregister companion IO packets handler
+ * @pm: address of the protocol manager to be unregistered
+ */
+int pm_io_ops_unregister(struct companion_protocol_manager *pm)
+{
+ int result = 0;
+
+ down_write(&pm->io_lock);
+ if (!pm->io_ops) {
+ result = -ENODEV;
+ goto out;
+ }
+
+ pm->io_ops = NULL;
+ pm->io_data = NULL;
+ qm_reset_io(&pm->qm);
+
+out:
+ up_write(&pm->io_lock);
+ return result;
+}
+
+/**
+ * pm_can_ops_register() - register companion CAN packets handler
+ * @pm: address of the protocol manager to be registered
+ * @port: port number of which CAN to be registered
+ * @ops: address of the CAN packets callback
+ * @data: address of the CAN packets callback argument
+ */
+int pm_can_ops_register(struct companion_protocol_manager *pm,
+ u8 port,
+ struct companion_can_ops *ops,
+ void *data)
+{
+ int i, result = 0;
+
+ if (port >= BCP_CAN_PORTS)
+ return -EINVAL;
+
+ down_write(&pm->can_lock[port]);
+ if (pm->can_ops[port]) {
+ result = -EEXIST;
+ goto out;
+ }
+
+ qm_reset_can(&pm->qm, port);
+ pm->can_ops[port] = ops;
+ pm->can_data[port] = data;
+
+ for (i = 0; i < BCP_CAN_PRIOS; ++i) {
+ pm->timer[port][i].data.pm = pm;
+ pm->timer[port][i].data.port = port;
+ pm->timer[port][i].data.prio = i;
+ INIT_WORK(&pm->timer[port][i].data.work,
+ pm_can_tx_timeout_callback);
+ timer_setup(&pm->timer[port][i].timer, pm_can_on_tx_timeout, 0);
+ }
+
+out:
+ up_write(&pm->can_lock[port]);
+ return result;
+}
+
+/**
+ * pm_can_ops_unregister() - unregister companion CAN packets handler
+ * @pm: address of the protocol manager to be unregistered
+ * @port: port number of which CAN to be unregistered
+ */
+int pm_can_ops_unregister(struct companion_protocol_manager *pm, u8 port)
+{
+ int i, result = 0;
+
+ if (port >= BCP_CAN_PORTS)
+ return -EINVAL;
+
+ down_write(&pm->can_lock[port]);
+ if (!pm->can_ops[port]) {
+ result = -ENODEV;
+ goto out;
+ }
+
+ pm->can_ops[port] = NULL;
+ pm->can_data[port] = NULL;
+ qm_reset_can(&pm->qm, port);
+
+ for (i = 0; i < BCP_CAN_PRIOS; ++i) {
+ del_timer_sync(&pm->timer[port][i].timer);
+ cancel_work_sync(&pm->timer[port][i].data.work);
+ pm->timer[port][i].data.pm = NULL;
+ pm->timer[port][i].data.port = 0;
+ pm->timer[port][i].data.prio = 0;
+ }
+
+out:
+ up_write(&pm->can_lock[port]);
+ return result;
+}
+
+/**
+ * pm_prepare_tx() - prepare tx data
+ * @pm: address of the protocol manager to be used
+ * @p: address of the data to be sent
+ */
+void pm_prepare_tx(struct companion_protocol_manager *pm,
+ struct companion_packet *p)
+{
+ pm->is_io_type = false;
+
+ if (qm_get_tx_data(&pm->qm, p)) {
+ if (is_io_type(p))
+ pm->is_io_type = true;
+ } else {
+ memset(p, BCP_NOOP, sizeof(*p));
+ }
+}
+
+/**
+ * pm_on_tx_done() - handle tx done
+ * @pm: address of the protocol manager to be used
+ */
+void pm_on_tx_done(struct companion_protocol_manager *pm)
+{
+ if (!pm->is_io_type)
+ return;
+
+ down_read(&pm->io_lock);
+ if (pm->io_ops && pm->io_ops->on_tx_done)
+ pm->io_ops->on_tx_done(pm->io_data);
+ up_read(&pm->io_lock);
+}
+
+/**
+ * pm_on_rx_done() - handle rx done
+ * @pm: address of the protocol manager to be used
+ * @p: address of the recevied data
+ */
+void pm_on_rx_done(struct companion_protocol_manager *pm,
+ const struct companion_packet *p)
+{
+ struct companion_filter *filter;
+
+ list_for_each_entry(filter, &pm->filters, node) {
+ if (filter->match && filter->match(p)) {
+ if (filter->process)
+ filter->process(pm, p);
+
+ break;
+ }
+ }
+}
+
+/**
+ * pm_can_data_tx() - send CAN data according to protocol
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be sent
+ * @prio: priority of the data to be sent
+ * @cf: the raw CAN frame to be send
+ */
+int pm_can_data_tx(struct companion_protocol_manager *pm,
+ u8 port,
+ u8 prio,
+ const struct can_frame *cf)
+{
+ struct can_data_frame p;
+
+ if (port >= BCP_CAN_PORTS || prio >= BCP_CAN_PRIOS)
+ return -EINVAL;
+
+ if (pm->local_txq[port][prio] == 0)
+ return -ENOSPC;
+
+ p.type = BCP_CAN_DATA;
+ p.port = port + 1;
+ p.prio = prio;
+ p.dlc = cf->can_dlc;
+ p.id = cf->can_id;
+ memcpy(p.data, cf->data, sizeof(cf->data));
+
+ if (!qm_can_txq_in(&pm->qm,
+ (struct companion_packet *)&p,
+ port,
+ prio)) {
+ pm->stats.can_tx_overflows[port][prio]++;
+ return -ENOSPC;
+ }
+
+ pm->local_txq[port][prio]--;
+
+ pm->stats.can_tx[port][prio]++;
+ return 0;
+}
+
+/**
+ * pm_can_data_rx() - receive CAN data according to protocol
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be received
+ * @cf: address of the raw CAN frame to be copied
+ */
+int pm_can_data_rx(struct companion_protocol_manager *pm,
+ u8 port,
+ struct can_frame *cf)
+{
+ struct can_data_frame p;
+
+ if (port >= BCP_CAN_PORTS)
+ return -EINVAL;
+
+ if (!qm_can_rxq_out(&pm->qm, (struct companion_packet *)&p, port))
+ return -EIO;
+
+ cf->can_id = p.id;
+ cf->can_dlc = p.dlc;
+ memcpy(cf->data, p.data, sizeof(cf->data));
+ return 0;
+}
+
+/**
+ * pm_can_err() - receive CAN error according to protocol
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be received
+ * @bec: address of the error counter to be copied
+ * @state: address of the error state to be copied
+ * @code: address of the error code to be copied
+ */
+int pm_can_err(struct companion_protocol_manager *pm,
+ u8 port,
+ struct can_berr_counter *berr,
+ u8 *state,
+ u8 *code)
+{
+ struct can_status_response p;
+
+ if (port >= BCP_CAN_PORTS)
+ return -EINVAL;
+
+ if (!qm_can_err_out(&pm->qm, (struct companion_packet *)&p, port))
+ return -EIO;
+
+ berr->rxerr = p.rx_err;
+ berr->txerr = p.tx_err;
+ *state = p.state;
+ *code = p.code;
+ return 0;
+}
+
+/**
+ * pm_wait_for_response() - wait for CAN packets response
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be wait
+ * @flag: flag to be wait
+ */
+int pm_wait_for_response(struct companion_protocol_manager *pm,
+ u8 port,
+ enum bcp_can_flag flag)
+{
+ unsigned long *flags = &pm->flags[port];
+ long ret;
+
+ if (test_bit(flag, flags)) {
+ ret = wait_event_interruptible_timeout(pm->wait[port],
+ !test_bit(flag, flags),
+ PM_RESPONSE_TIMEOUT);
+
+ if (ret < 0)
+ return ret;
+
+ if (ret == 0)
+ return -ETIMEDOUT;
+ }
+
+ return pm->response[port][flag];
+}
+
+/**
+ * pm_can_set_bittiming() - set CAN bittiming according to protocol
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be set
+ * @bittiming: the bittiming to be set
+ */
+int pm_can_set_bittiming(struct companion_protocol_manager *pm,
+ u8 port,
+ const struct can_bittiming *bittiming)
+{
+ struct can_bittiming_request p;
+
+ if (port >= BCP_CAN_PORTS)
+ return -EINVAL;
+
+ memset(&p, 0, sizeof(p));
+ p.type = BCP_CAN_BITTIMING;
+ p.port = port + 1;
+ p.prescaler = bittiming->brp;
+ p.prop_seg = bittiming->prop_seg;
+ p.phase_seg1 = bittiming->phase_seg1;
+ p.phase_seg2 = bittiming->phase_seg2;
+ p.sjw = bittiming->sjw;
+
+ if (!qm_can_txq_in(&pm->qm,
+ (struct companion_packet *)&p,
+ port,
+ 0)) {
+ pm->stats.can_tx_overflows[port][0]++;
+ return -ENOSPC;
+ }
+
+ set_bit(bcp_can_bittiming, &pm->flags[port]);
+ pm->stats.can_tx[port][0]++;
+ return 0;
+}
+
+/**
+ * pm_can_set_mode() - set CAN mode according to protocol
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be set
+ * @mode: the mode to be set
+ */
+int pm_can_set_mode(struct companion_protocol_manager *pm,
+ u8 port,
+ enum can_mode mode)
+{
+ struct can_mode_request p;
+
+ if (port >= BCP_CAN_PORTS)
+ return -EINVAL;
+
+ memset(&p, 0, sizeof(p));
+ p.type = BCP_CAN_MODE;
+ p.port = port + 1;
+
+ switch (mode) {
+ case CAN_MODE_START:
+ p.mode = BCP_CAN_MODE_NORMAL;
+ break;
+
+ case CAN_MODE_STOP:
+ p.mode = BCP_CAN_MODE_OFF;
+ break;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ if (!qm_can_txq_in(&pm->qm,
+ (struct companion_packet *)&p,
+ port,
+ 0)) {
+ pm->stats.can_tx_overflows[port][0]++;
+ return -ENOSPC;
+ }
+
+ set_bit(bcp_can_mode, &pm->flags[port]);
+ pm->stats.can_tx[port][0]++;
+ return 0;
+}
+
+/**
+ * pm_can_set_ctrlmode() - set CAN control mode according to protocol
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be set
+ * @ctrl: the control mode to be set
+ */
+int pm_can_set_ctrlmode(struct companion_protocol_manager *pm,
+ u8 port,
+ u32 ctrl)
+{
+ struct can_mode_request p;
+
+ if (port >= BCP_CAN_PORTS)
+ return -EINVAL;
+
+ if (!(ctrl & CAN_CTRLMODE_LISTENONLY))
+ return -EOPNOTSUPP;
+
+ memset(&p, 0, sizeof(p));
+ p.type = BCP_CAN_MODE;
+ p.port = port + 1;
+ p.mode = BCP_CAN_MODE_LISTEN;
+
+ if (!qm_can_txq_in(&pm->qm,
+ (struct companion_packet *)&p,
+ port,
+ 0)) {
+ pm->stats.can_tx_overflows[port][0]++;
+ return -ENOSPC;
+ }
+
+ set_bit(bcp_can_mode, &pm->flags[port]);
+ pm->stats.can_tx[port][0]++;
+ return 0;
+}
+
+/**
+ * pm_can_get_status() - get CAN status according to protocol
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be inquiry
+ */
+int pm_can_get_status(struct companion_protocol_manager *pm, u8 port)
+{
+ struct can_status_request p;
+
+ if (port >= BCP_CAN_PORTS)
+ return -EINVAL;
+
+ memset(&p, 0, sizeof(p));
+ p.type = BCP_CAN_STATUS;
+ p.port = port + 1;
+
+ if (!qm_can_txq_in(&pm->qm,
+ (struct companion_packet *)&p,
+ port,
+ 0)) {
+ pm->stats.can_tx_overflows[port][0]++;
+ return -ENOSPC;
+ }
+
+ set_bit(bcp_can_status, &pm->flags[port]);
+ pm->stats.can_tx[port][0]++;
+ return 0;
+}
+
+/**
+ * pm_can_get_txq_status() - get CAN tx queue status according to protocol
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be inquiry
+ */
+int pm_can_get_txq_status(struct companion_protocol_manager *pm, u8 port)
+{
+ struct can_txq_status_request p;
+
+ if (port >= BCP_CAN_PORTS)
+ return -EINVAL;
+
+ memset(&p, 0, sizeof(p));
+ p.type = BCP_CAN_TX_QUEUE_STATUS;
+ p.port = port + 1;
+
+ if (!qm_can_txq_in(&pm->qm,
+ (struct companion_packet *)&p,
+ port,
+ 0)) {
+ pm->stats.can_tx_overflows[port][0]++;
+ return -ENOSPC;
+ }
+
+ set_bit(bcp_can_txq_status, &pm->flags[port]);
+ pm->stats.can_tx[port][0]++;
+ return 0;
+}
+
+/**
+ * pm_can_txq_is_full() - inquiry CAN tx queue is full
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be inquiry
+ * @prio: queue number of which tx queue to be inquiry
+ * @is_full: address of the is full result to be copied
+ */
+int pm_can_txq_is_full(struct companion_protocol_manager *pm,
+ u8 port,
+ u8 prio,
+ bool *is_full)
+{
+ if (port >= BCP_CAN_PORTS || prio >= BCP_CAN_PRIOS)
+ return -EINVAL;
+
+ *is_full = (pm->local_txq[port][prio] == 0);
+ return 0;
+}
+
+/**
+ * pm_can_txq_has_space() - inquiry CAN tx queue has space
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be inquiry
+ * @prio: queue number of which tx queue to be inquiry
+ * @has_space: address of the has space result to be copied
+ */
+int pm_can_txq_has_space(struct companion_protocol_manager *pm,
+ u8 port,
+ u8 prio,
+ bool *has_space)
+{
+ if (port >= BCP_CAN_PORTS || prio >= BCP_CAN_PRIOS)
+ return -EINVAL;
+
+ *has_space = (pm->local_txq[port][prio] > 0);
+ return 0;
+}
+
+/**
+ * pm_can_start_tx_timer() - start CAN tx timeout detection
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be used
+ * @prio: queue number of which tx queue's timer to be used
+ */
+int pm_can_start_tx_timer(struct companion_protocol_manager *pm,
+ u8 port,
+ u8 prio)
+{
+ if (port >= BCP_CAN_PORTS || prio >= BCP_CAN_PRIOS)
+ return -EINVAL;
+
+ mod_timer(&pm->timer[port][prio].timer, jiffies + PM_CAN_TX_TIMEOUT);
+ return 0;
+}
+
+/**
+ * pm_can_stop_tx_timer() - stop CAN tx timeout detection
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be used
+ * @prio: queue number of which tx queue's timer to be used
+ */
+int pm_can_stop_tx_timer(struct companion_protocol_manager *pm,
+ u8 port,
+ u8 prio)
+{
+ if (port >= BCP_CAN_PORTS || prio >= BCP_CAN_PRIOS)
+ return -EINVAL;
+
+ del_timer_sync(&pm->timer[port][prio].timer);
+ return 0;
+}
diff --git a/drivers/spi/companion/protocol-manager.h b/drivers/spi/companion/protocol-manager.h
new file mode 100644
index 0000000..2cf10fa
--- /dev/null
+++ b/drivers/spi/companion/protocol-manager.h
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Companion protocol manager code
+ *
+ * Copyright (C) 2015-2018 Bosch Sicherheitssysteme GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _BOSCH_COMPANION_PROTOCOL_MANAGER_H
+#define _BOSCH_COMPANION_PROTOCOL_MANAGER_H
+
+#include <linux/can/dev.h>
+#include <linux/list.h>
+#include <linux/rwsem.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/companion.h>
+#include "queue-manager.h"
+
+/**
+ * enum bcp_can_flag - companion CAN packet event flag
+ */
+enum bcp_can_flag {
+ bcp_can_bittiming,
+ bcp_can_mode,
+ bcp_can_status,
+ bcp_can_txq_status,
+
+ bcp_can_max
+};
+
+/**
+ * struct companion_statistics - statistics information of companion
+ * @io_tx_overflows: counter of IO packets transmit overflow
+ * @io_rx_overflows: counter of IO packets receive overflow
+ * @can_tx_overflows: counter of CAN packets transmit overflow
+ * @can_rx_overflows: counter of CAN packets receive overflow
+ * @can_err_overflows: counter of CAN error packets receive overflow
+ * @io_tx: counter of IO packets transmitted
+ * @io_rx: counter of IO packets received
+ * @can_tx: counter of CAN packets transmitted
+ * @can_ack_success: counter of CAN response success packets received
+ * @can_ack_failure: counter of CAN response failure packets received
+ * @can_rx: counter of CAN packets received
+ * @can_err: counter of CAN error packets received
+ * @can_lost_seq_sync: counter of CAN packets sequence lost sync
+ * @can_lost_txq_sync: counter of CAN tx queue status lost sync
+ * @can_ack_timeout: counter of CAN tx ack timeout
+ * @can_ack_unexpect: counter of CAN unexpected tx ack
+ */
+struct companion_statistics {
+ u32 io_tx_overflows;
+ u32 io_rx_overflows;
+ u32 can_tx_overflows[BCP_CAN_PORTS][BCP_CAN_PRIOS];
+ u32 can_rx_overflows[BCP_CAN_PORTS];
+ u32 can_err_overflows[BCP_CAN_PORTS];
+
+ u32 io_tx;
+ u32 io_rx;
+ u32 can_tx[BCP_CAN_PORTS][BCP_CAN_PRIOS];
+ u32 can_ack_success[BCP_CAN_PORTS][BCP_CAN_PRIOS];
+ u32 can_ack_failure[BCP_CAN_PORTS][BCP_CAN_PRIOS];
+ u32 can_rx[BCP_CAN_PORTS];
+ u32 can_err[BCP_CAN_PORTS];
+ u32 can_lost_seq_sync[BCP_CAN_PORTS][BCP_CAN_PRIOS];
+ u32 can_lost_txq_sync[BCP_CAN_PORTS][BCP_CAN_PRIOS];
+ u32 can_ack_timeout[BCP_CAN_PORTS][BCP_CAN_PRIOS];
+ u32 can_ack_unexpect[BCP_CAN_PORTS][BCP_CAN_PRIOS];
+};
+
+struct companion_protocol_manager;
+/**
+ * struct companion_timer_data - encapsulate data passed to timer
+ * @pm: companion protocol manager
+ * @port: port number of which CAN associated with the timer
+ * @prio: priority of which CAN tx queue associated with the timer
+ * @work: work for execute timeout callback in thread context
+ */
+struct companion_timer_data {
+ struct companion_protocol_manager *pm;
+ u8 port;
+ u8 prio;
+ struct work_struct work;
+};
+
+/**
+ * struct companion_timer - encapsulate timer and data
+ * @timer: timer_list object for timeout
+ * @data: data associated with the timer
+ */
+struct companion_timer {
+ struct timer_list timer;
+ struct companion_timer_data data;
+};
+
+/**
+ * struct companion_protocol_manager - encapsulate companion protocol handling
+ * @io_ops: callback of IO packet handling
+ * @io_data: callback argument of io_ops
+ * @io_lock: lock to protect IO callback
+ * @can_ops: callback of CAN packet handling
+ * @can_data: callback argument of can_ops
+ * @can_lock: lock to protect CAN callback
+ * @wait: wait queue head for CAN packet response
+ * @flags: event flags for CAN packet response
+ * @response: response result of each CAN packet event flag
+ * @rx_err: receive error counter of CAN port
+ * @tx_err: transmit error counter of CAN port
+ * @sequence: sequence counter of each CAN tx queue
+ * @remote_txq: CAN tx queue space status at remote
+ * @local_txq: CAN tx queue space status at local
+ * @timer: timer for detect CAN tx ack timeout for each CAN tx queue
+ * @stats: statistics information of companion
+ * @is_io_type: flag to record the sent packet is IO type or not
+ * @qm: queue manager
+ * @filters: filter list to handle receveid companion packets
+ */
+struct companion_protocol_manager {
+ struct companion_io_ops *io_ops;
+ void *io_data;
+ struct rw_semaphore io_lock;
+ struct companion_can_ops *can_ops[BCP_CAN_PORTS];
+ void *can_data[BCP_CAN_PORTS];
+ struct rw_semaphore can_lock[BCP_CAN_PORTS];
+ wait_queue_head_t wait[BCP_CAN_PORTS];
+ unsigned long flags[BCP_CAN_PORTS];
+ int response[BCP_CAN_PORTS][bcp_can_max];
+ u8 rx_err[BCP_CAN_PORTS];
+ u8 tx_err[BCP_CAN_PORTS];
+ u8 sequence[BCP_CAN_PORTS][BCP_CAN_PRIOS];
+ u8 remote_txq[BCP_CAN_PORTS][BCP_CAN_PRIOS];
+ u8 local_txq[BCP_CAN_PORTS][BCP_CAN_PRIOS];
+ struct companion_timer timer[BCP_CAN_PORTS][BCP_CAN_PRIOS];
+
+ struct companion_statistics stats;
+ bool is_io_type;
+
+ struct companion_queue_manager qm;
+ struct list_head filters;
+};
+
+/**
+ * pm_init() - initialize the protocol manager
+ * @pm: address of the protocol manager to be initialized
+ */
+void pm_init(struct companion_protocol_manager *pm);
+
+/**
+ * pm_io_ops_register() - register companion IO packets handler
+ * @pm: address of the protocol manager to be registered
+ * @ops: address of the IO packets callback
+ * @data: address of the IO packets callback argument
+ */
+int pm_io_ops_register(struct companion_protocol_manager *pm,
+ struct companion_io_ops *ops,
+ void *data);
+
+/**
+ * pm_io_ops_unregister() - unregister companion IO packets handler
+ * @pm: address of the protocol manager to be unregistered
+ */
+int pm_io_ops_unregister(struct companion_protocol_manager *pm);
+
+/**
+ * pm_can_ops_register() - register companion CAN packets hanler
+ * @pm: address of the protocol manager to be registered
+ * @port: port number of which CAN to be registered
+ * @ops: address of the CAN packets callback
+ * @data: address of the CAN packets callback argument
+ */
+int pm_can_ops_register(struct companion_protocol_manager *pm,
+ u8 port,
+ struct companion_can_ops *ops,
+ void *data);
+
+/**
+ * pm_can_ops_unregister() - unregister companion CAN packets handler
+ * @pm: address of the protocol manager to be unregistered
+ * @port: port number of which CAN to be unregistered
+ */
+int pm_can_ops_unregister(struct companion_protocol_manager *pm, u8 port);
+
+/**
+ * pm_prepare_tx() - prepare tx data
+ * @pm: address of the protocol manager to be used
+ * @p: address of the data to be sent
+ */
+void pm_prepare_tx(struct companion_protocol_manager *pm,
+ struct companion_packet *p);
+
+/**
+ * pm_on_tx_done() - handle tx done
+ * @pm: address of the protocol manager to be used
+ */
+void pm_on_tx_done(struct companion_protocol_manager *pm);
+
+/**
+ * pm_on_rx_done() - handle rx done
+ * @pm: address of the protocol manager to be used
+ * @p: address of the recevied data
+ */
+void pm_on_rx_done(struct companion_protocol_manager *pm,
+ const struct companion_packet *p);
+
+/**
+ * pm_can_data_tx() - send CAN data according to protocol
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be sent
+ * @prio: priority of the data to be sent
+ * @cf: the raw CAN frame to be send
+ */
+int pm_can_data_tx(struct companion_protocol_manager *pm,
+ u8 port,
+ u8 prio,
+ const struct can_frame *cf);
+
+/**
+ * pm_can_data_rx() - receive CAN data according to protocol
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be received
+ * @cf: address of the raw CAN frame to be copied
+ */
+int pm_can_data_rx(struct companion_protocol_manager *pm,
+ u8 port,
+ struct can_frame *cf);
+
+/**
+ * pm_can_err() - receive CAN error according to protocol
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be received
+ * @bec: address of the error counter to be copied
+ * @state: address of the error state to be copied
+ * @code: address of the error code to be copied
+ */
+int pm_can_err(struct companion_protocol_manager *pm,
+ u8 port,
+ struct can_berr_counter *bec,
+ u8 *state,
+ u8 *code);
+
+/**
+ * pm_wait_for_response() - wait for CAN packets response
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be wait
+ * @flag: flag to be wait
+ */
+int pm_wait_for_response(struct companion_protocol_manager *pm,
+ u8 port,
+ enum bcp_can_flag flag);
+
+/**
+ * pm_can_set_bittiming() - set CAN bittiming according to protocol
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be set
+ * @bittiming: the bittiming to be set
+ */
+int pm_can_set_bittiming(struct companion_protocol_manager *pm,
+ u8 port,
+ const struct can_bittiming *bittiming);
+
+/**
+ * pm_can_set_mode() - set CAN mode according to protocol
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be set
+ * @mode: the mode to be set
+ */
+int pm_can_set_mode(struct companion_protocol_manager *pm,
+ u8 port,
+ enum can_mode mode);
+
+/**
+ * pm_can_set_ctrlmode() - set CAN control mode according to protocol
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be set
+ * @ctrl: the control mode to be set
+ */
+int pm_can_set_ctrlmode(struct companion_protocol_manager *pm,
+ u8 port,
+ u32 ctrl);
+
+/**
+ * pm_can_get_status() - get CAN status according to protocol
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be inquiry
+ */
+int pm_can_get_status(struct companion_protocol_manager *pm, u8 port);
+
+/**
+ * pm_can_get_txq_status() - get CAN tx queue status according to protocol
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be inquiry
+ */
+int pm_can_get_txq_status(struct companion_protocol_manager *pm, u8 port);
+
+/**
+ * pm_can_txq_is_full() - inquiry CAN tx queue is full
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be inquiry
+ * @prio: queue number of which tx queue to be inquiry
+ * @is_full: address of the is full result to be copied
+ */
+int pm_can_txq_is_full(struct companion_protocol_manager *pm,
+ u8 port,
+ u8 prio,
+ bool *is_full);
+
+/**
+ * pm_can_txq_has_space() - inquiry CAN tx queue has space
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be inquiry
+ * @prio: queue number of which tx queue to be inquiry
+ * @has_space: address of the has space result to be copied
+ */
+int pm_can_txq_has_space(struct companion_protocol_manager *pm,
+ u8 port,
+ u8 prio,
+ bool *has_space);
+
+/**
+ * pm_can_start_tx_timer() - start CAN tx timeout detection
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be used
+ * @prio: queue number of which tx queue's timer to be used
+ */
+int pm_can_start_tx_timer(struct companion_protocol_manager *pm,
+ u8 port,
+ u8 prio);
+
+/**
+ * pm_can_stop_tx_timer() - stop CAN tx timeout detection
+ * @pm: address of the protocol manager to be used
+ * @port: port number of which CAN to be used
+ * @prio: queue number of which tx queue's timer to be used
+ */
+int pm_can_stop_tx_timer(struct companion_protocol_manager *pm,
+ u8 port,
+ u8 prio);
+#endif
diff --git a/drivers/spi/companion/protocol.h b/drivers/spi/companion/protocol.h
new file mode 100644
index 0000000..7f70ed6
--- /dev/null
+++ b/drivers/spi/companion/protocol.h
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Companion protocol kernel space API
+ *
+ * Copyright (C) 2015-2018 Bosch Sicherheitssysteme GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _BOSCH_COMPANION_PROTOCOL_KERNEL_H
+#define _BOSCH_COMPANION_PROTOCOL_KERNEL_H
+
+#include <linux/kernel.h>
+
+#define BCP_CAN_PORTS 2u
+#define BCP_CAN_PRIOS 8u
+
+/**
+ * BCP type field definitions (CAN)
+ */
+#define BCP_NOOP 0x00u
+#define BCP_CAN_DATA 0x01u
+#define BCP_CAN_BITTIMING 0x03u
+#define BCP_CAN_MODE 0x04u
+#define BCP_CAN_STATUS 0x06u
+#define BCP_CAN_TX_ACK 0x07u
+#define BCP_CAN_TX_QUEUE_STATUS 0x0Fu
+
+/**
+ * BCP status field definitions
+ */
+#define BCP_STATUS_SUCCESS 0x00u
+#define BCP_STATUS_UNKNOWN 0x01u
+#define BCP_STATUS_OTHER 0x02u
+
+/**
+ * BCP packet size definition
+ */
+#define BCP_PACKET_SIZE 16u
+
+/**
+ * struct companion_packet - companion packet general format
+ * @data: contents of the packet
+ */
+struct companion_packet {
+ u8 data[BCP_PACKET_SIZE];
+};
+
+/**
+ * struct can_data_frame - companion can data frame packet
+ * @type: packet type
+ * @port: can port
+ * @prio: priority of the can frame
+ * @dlc: can frame payload in bytes
+ * @id: can frame id
+ * @data: can frame payload
+ */
+struct can_data_frame {
+ u8 type;
+ u8 port;
+ u8 prio;
+ u8 dlc;
+ u32 id;
+ u8 data[8];
+};
+
+/**
+ * struct can_bittiming_request - companion can bittiming request packet
+ * @type: packet type
+ * @port: can port
+ * @prescaler: bitrate prescaler
+ * @prop_seg: propagation segment in TQs
+ * @phase_seg1: phase buffer segment 1 in TQs
+ * @phase_seg2: phase buffer segment 2 in TQs
+ * @sjw: synchronisation jump width in TQs
+ * @reserved: reserved
+ */
+struct can_bittiming_request {
+ u8 type;
+ u8 port;
+ u16 prescaler;
+ u8 prop_seg;
+ u8 phase_seg1;
+ u8 phase_seg2;
+ u8 sjw;
+ u8 reserved[8];
+};
+
+/**
+ * struct can_bittiming_response - companion can bittiming response packet
+ * @type: packet type
+ * @port: can port
+ * @prescaler: bitrate prescaler
+ * @prop_seg: propagation segment in TQs
+ * @phase_seg1: phase buffer segment 1 in TQs
+ * @phase_seg2: phase buffer segment 2 in TQs
+ * @sjw: synchronisation jump width in TQs
+ * @reserved: reserved
+ * @status: process status
+ */
+struct can_bittiming_response {
+ u8 type;
+ u8 port;
+ u16 prescaler;
+ u8 prop_seg;
+ u8 phase_seg1;
+ u8 phase_seg2;
+ u8 sjw;
+ u8 reserved[7];
+ u8 status;
+};
+
+/**
+ * struct can_mode_request - companion can mode request packet
+ * @type: packet type
+ * @port: can port
+ * @mode: can mode
+ * @reserved: reserved
+ */
+struct can_mode_request {
+ u8 type;
+ u8 port;
+ u8 mode;
+ u8 reserved[13];
+};
+#define BCP_CAN_MODE_OFF 0x00u
+#define BCP_CAN_MODE_NORMAL 0x01u
+#define BCP_CAN_MODE_LISTEN 0x02u
+
+/**
+ * struct can_mode_response - companion can mode response packet
+ * @type: packet type
+ * @port: can port
+ * @mode: can mode
+ * @reserved: reserved
+ * @status: process status
+ */
+struct can_mode_response {
+ u8 type;
+ u8 port;
+ u8 mode;
+ u8 reserved[12];
+ u8 status;
+};
+
+/**
+ * struct can_status_request - companion can status request packet
+ * @type: packet type
+ * @port: can port
+ * @reserved: reserved
+ */
+struct can_status_request {
+ u8 type;
+ u8 port;
+ u8 reserved[14];
+};
+
+/**
+ * struct can_status_response - companion can status response packet
+ * @type: packet type
+ * @port: can port
+ * @rx_err: rx error counter
+ * @tx_err: tx error counter
+ * @err1: can controller error status 1
+ * @err2: can controller error status 2
+ * @reserved: reserved
+ * @status: process status
+ */
+struct can_status_response {
+ u8 type;
+ u8 port;
+ u8 rx_err;
+ u8 tx_err;
+ u8 state;
+ u8 code;
+ u8 reserved[9];
+ u8 status;
+};
+
+/**
+ * struct can_tx_acknowledge - companion can tx acknowledge packet
+ * @type: packet type
+ * @port: can port
+ * @prio: priority of the can frame
+ * @dlc: payload length of the can frame
+ * @sequence: monotonic increasing sequence counter of sent can frames
+ * @space: queue space left of this priority
+ * @reserved: reserved
+ * @status: process status
+ */
+struct can_tx_acknowledge {
+ u8 type;
+ u8 port;
+ u8 prio;
+ u8 dlc;
+ u8 sequence;
+ u8 space;
+ u8 reserved[9];
+ u8 status;
+};
+
+/**
+ * struct can_txq_status_request - companion can txq status request packet
+ * @type: packet type
+ * @port: can port
+ * @reserved: reserved
+ */
+struct can_txq_status_request {
+ u8 type;
+ u8 port;
+ u8 reserved[14];
+};
+
+/**
+ * struct can_txq_status_response - companion can txq status response packet
+ * @type: packet type
+ * @port: can port
+ * @space: queue space left of each priority
+ * @reserved: reserved
+ * @status: process status
+ */
+struct can_txq_status_response {
+ u8 type;
+ u8 port;
+ u8 space[8];
+ u8 reserved[5];
+ u8 status;
+};
+
+/**
+ * is_null_type() - return true if the packet is null type
+ * @p: the packet to test
+ */
+static inline bool is_null_type(const struct companion_packet *p)
+{
+ return p->data[0] == BCP_NOOP;
+}
+
+/**
+ * is_io_type() - return true if the packet is io type
+ * @p: the packet to test
+ */
+static inline bool is_io_type(const struct companion_packet *p)
+{
+ return (p->data[0] & 0x80);
+}
+
+/**
+ * is_can_type() - return true if the packet is can type
+ * @p: the packet to test
+ */
+static inline bool is_can_type(const struct companion_packet *p)
+{
+ return !is_io_type(p) && !is_null_type(p);
+}
+
+/**
+ * dump_packet() - dump raw packet data in hexadecimal format
+ * @p: the packet to dump
+ * @level: the log level of the dump
+ * @prefix: the prefix string of the dump
+ */
+static inline void dump_packet(const struct companion_packet *p,
+ const char *level,
+ const char *prefix)
+{
+ print_hex_dump(level, prefix, DUMP_PREFIX_NONE, 16, 1,
+ p->data, sizeof(p->data), false);
+}
+
+#endif
diff --git a/drivers/spi/companion/queue-manager.c b/drivers/spi/companion/queue-manager.c
new file mode 100644
index 0000000..f72696f
--- /dev/null
+++ b/drivers/spi/companion/queue-manager.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Companion queue management code
+ *
+ * Copyright (C) 2015-2018 Bosch Sicherheitssysteme GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "queue-manager.h"
+
+/**
+ * qm_init() - initialize all managed queues
+ * @qm: address of the queue manager to be initialized
+ */
+void qm_init(struct companion_queue_manager *qm)
+{
+ int i, j;
+
+ INIT_KFIFO(qm->io_txq.fifo);
+ INIT_KFIFO(qm->io_rxq.fifo);
+
+ for (i = 0; i < BCP_CAN_PORTS; ++i) {
+ for (j = 0; j < BCP_CAN_PRIOS; ++j)
+ INIT_KFIFO(qm->can_txq[i][j].fifo);
+
+ INIT_KFIFO(qm->can_rxq[i].fifo);
+ INIT_KFIFO(qm->can_err[i].fifo);
+ mutex_init(&qm->can_txq_lock[i]);
+ }
+}
+
+/**
+ * qm_reset() - reset all managed queues
+ * @qm: address of the queue manager to be reset
+ */
+void qm_reset(struct companion_queue_manager *qm)
+{
+ int i;
+
+ qm_reset_io(qm);
+
+ for (i = 0; i < BCP_CAN_PORTS; ++i)
+ qm_reset_can(qm, i);
+}
+
+/**
+ * qm_reset_io() - reset managed IO queues
+ * @qm: address of the queue manager to be reset
+ */
+void qm_reset_io(struct companion_queue_manager *qm)
+{
+ kfifo_reset(&qm->io_txq.fifo);
+ kfifo_reset(&qm->io_rxq.fifo);
+}
+
+/**
+ * qm_reset_can() - reset managed CAN queues
+ * @qm: address of the queue manager to be reset
+ * @port: port number of which CAN queue should be reset
+ */
+void qm_reset_can(struct companion_queue_manager *qm, u8 port)
+{
+ int i;
+
+ for (i = 0; i < BCP_CAN_PRIOS; ++i)
+ kfifo_reset(&qm->can_txq[port][i].fifo);
+
+ kfifo_reset(&qm->can_rxq[port].fifo);
+ kfifo_reset(&qm->can_err[port].fifo);
+}
+
+/**
+ * qm_has_tx_data() - return true if has tx data
+ * @qm: address of the queue manager to be used
+ */
+bool qm_has_tx_data(struct companion_queue_manager *qm)
+{
+ int i, j;
+
+ for (i = 0; i < BCP_CAN_PORTS; ++i)
+ for (j = 0; j < BCP_CAN_PRIOS; ++j)
+ if (!kfifo_is_empty(&qm->can_txq[i][j].fifo))
+ return true;
+
+ return !kfifo_is_empty(&qm->io_txq.fifo);
+}
+
+/*
+ * Define maximum CAN packets can be sent in a row in case there is IO packet
+ * pending or coming, which specifies the minimal bandwidth for IO packets.
+ */
+#define CAN_MAX_IN_A_ROW 8
+
+/**
+ * qm_get_tx_data() - return true if got the tx data
+ * @qm: address of the queue manager to be used
+ * @p: where the data to be copied
+ */
+bool qm_get_tx_data(struct companion_queue_manager *qm,
+ struct companion_packet *p)
+{
+ int i, j;
+
+ /*
+ * Implement the companion packet scheduling algorithm which guarantees
+ * IO packets share minimal 1 / (CAN_MAX_IN_A_ROW + 1) bandwidth, and
+ * the rest bandwidth is shared equally for all CAN ports.
+ *
+ * The purpose is to ensure fairness between all CAN ports and also keep
+ * CAN packets have higher priority than IO packets in general, but
+ * avoid IO packets starvation in case CAN is very busy.
+ *
+ * The bandwidth is not statically allocated, so the active user (IO or
+ * CAN) can use up to 100% bandwidth if there are no other active users.
+ */
+
+ if (qm->io_promoted && qm_io_txq_out(qm, p)) {
+ qm->io_promoted = false;
+ return true;
+ }
+
+ for (i = 0; i < BCP_CAN_PORTS; ++i) {
+ /* ensure fairness for all can ports */
+ qm->can_current++;
+ if (qm->can_current >= BCP_CAN_PORTS)
+ qm->can_current = 0;
+
+ for (j = 0; j < BCP_CAN_PRIOS; ++j) {
+ if (qm_can_txq_out(qm, p, qm->can_current, j)) {
+ qm->can_sched++;
+ if (qm->can_sched >= CAN_MAX_IN_A_ROW) {
+ qm->io_promoted = true;
+ qm->can_sched = 0;
+ }
+ return true;
+ }
+ }
+ }
+
+ return qm_io_txq_out(qm, p);
+}
diff --git a/drivers/spi/companion/queue-manager.h b/drivers/spi/companion/queue-manager.h
new file mode 100644
index 0000000..aa5d31f
--- /dev/null
+++ b/drivers/spi/companion/queue-manager.h
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Companion queue management code
+ *
+ * Copyright (C) 2015-2018 Bosch Sicherheitssysteme GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _BOSCH_COMPANION_QUEUE_MANAGEMENT_H
+#define _BOSCH_COMPANION_QUEUE_MANAGEMENT_H
+
+#include <linux/kernel.h>
+#include <linux/kfifo.h>
+#include "protocol.h"
+
+#define QUEUE_SIZE 16u
+
+/**
+ * struct companion_queue - encapsulate kfifo as companion queue
+ * @fifo: the kfifo object for companion packets
+ */
+struct companion_queue {
+ DECLARE_KFIFO(fifo, struct companion_packet, QUEUE_SIZE);
+};
+
+/**
+ * struct companion_queue_manager - manage all queues for companion
+ * @io_txq: the tx queue for IO messages
+ * @io_rxq: the rx queue for IO messages
+ * @can_txq: the tx queues for CAN messages
+ * @can_rxq: the rx queues for CAN messages
+ * @can_err: the queues for CAN error messages
+ * @can_txq_lock: lock for protect CAN tx queue 0
+ * @io_promoted: flag to indicate promoted IO messages priority
+ * @can_current: the currently scheduled CAN port
+ * @can_sched: counter of how many times CAN messages be scheduled
+ */
+struct companion_queue_manager {
+ struct companion_queue io_txq;
+ struct companion_queue io_rxq;
+ struct companion_queue can_txq[BCP_CAN_PORTS][BCP_CAN_PRIOS];
+ struct companion_queue can_rxq[BCP_CAN_PORTS];
+ struct companion_queue can_err[BCP_CAN_PORTS];
+ struct mutex can_txq_lock[BCP_CAN_PORTS];
+
+ bool io_promoted;
+ u8 can_current;
+ u32 can_sched;
+};
+
+/**
+ * qm_init() - initialize all managed queues
+ * @qm: address of the queue manager to be initialized
+ */
+void qm_init(struct companion_queue_manager *qm);
+
+/**
+ * qm_reset() - reset all managed queues
+ * @qm: address of the queue manager to be reset
+ */
+void qm_reset(struct companion_queue_manager *qm);
+
+/**
+ * qm_reset_io() - reset managed IO queues
+ * @qm: address of the queue manager to be reset
+ */
+void qm_reset_io(struct companion_queue_manager *qm);
+
+/**
+ * qm_reset_can() - reset managed CAN queues
+ * @qm: address of the queue manager to be reset
+ * @port: port number of which CAN queue should be reset
+ */
+void qm_reset_can(struct companion_queue_manager *qm, u8 port);
+
+/**
+ * qm_has_tx_data() - return true if has tx data
+ * @qm: address of the queue manager to be used
+ */
+bool qm_has_tx_data(struct companion_queue_manager *qm);
+
+/**
+ * qm_get_tx_data() - return true if got the tx data
+ * @qm: address of the queue manager to be used
+ * @p: where the data to be copied
+ */
+bool qm_get_tx_data(struct companion_queue_manager *qm,
+ struct companion_packet *p);
+
+/**
+ * qm_io_txq_is_full() - return true if IO tx queue is full
+ * @qm: address of the queue manager to be used
+ */
+static inline bool qm_io_txq_is_full(struct companion_queue_manager *qm)
+{
+ return kfifo_is_full(&qm->io_txq.fifo);
+}
+
+/**
+ * qm_io_rxq_is_empty() - return true if IO rx queue is empty
+ * @qm: address of the queue manager to be used
+ */
+static inline bool qm_io_rxq_is_empty(struct companion_queue_manager *qm)
+{
+ return kfifo_is_empty(&qm->io_rxq.fifo);
+}
+
+/**
+ * qm_io_txq_in() - put data from user sapce into IO tx queue
+ * @qm: address of the queue manager to be used
+ * @buf: address of the data to be put
+ * @count: number of bytes to be put
+ * @copied: address to store the number of copied bytes
+ */
+static inline int qm_io_txq_in(struct companion_queue_manager *qm,
+ const char __user *buf,
+ size_t count,
+ unsigned int *copied)
+{
+ return kfifo_from_user(&qm->io_txq.fifo, buf, count, copied);
+}
+
+/**
+ * qm_io_txq_out() - get data from the IO tx queue
+ * @qm: address of the queue manager to be used
+ * @p: address of the data to be copied
+ */
+static inline bool qm_io_txq_out(struct companion_queue_manager *qm,
+ struct companion_packet *p)
+{
+ return kfifo_out(&qm->io_txq.fifo, p, 1) == 1;
+}
+
+/**
+ * qm_io_rxq_in() - put data into IO rx queue
+ * @qm: address of the queue manager to be used
+ * @p: address of the data to be put
+ */
+static inline bool qm_io_rxq_in(struct companion_queue_manager *qm,
+ const struct companion_packet *p)
+{
+ return kfifo_in(&qm->io_rxq.fifo, p, 1) == 1;
+}
+
+/**
+ * qm_io_rxq_out() - copy data from the IO rx queue into user space
+ * @qm: address of the queue manager to be used
+ * @buf: address of the data to be copied
+ * @count: number of the bytes to be copied
+ * @copied: address to store the number of copied bytes
+ */
+static inline int qm_io_rxq_out(struct companion_queue_manager *qm,
+ char __user *buf,
+ size_t count,
+ unsigned int *copied)
+{
+ return kfifo_to_user(&qm->io_rxq.fifo, buf, count, copied);
+}
+
+/**
+ * qm_can_txq_in() - put data into CAN tx queue
+ * @qm: address of the queue manager to be used
+ * @p: address of the data to be put
+ * @port: port number of which CAN queue array to be put
+ * @prio: priority of which CAN queue to be put
+ */
+static inline bool qm_can_txq_in(struct companion_queue_manager *qm,
+ const struct companion_packet *p,
+ u8 port,
+ u8 prio)
+{
+ bool result = false;
+
+ if (prio > 0)
+ return kfifo_in(&qm->can_txq[port][prio].fifo, p, 1) == 1;
+
+ /* queue 0 has multiple writers due to it sends both data and
+ * administrative frames, while queue 1-7 only send data frame
+ * (single writer), hence only queue 0 needs lock.
+ */
+ mutex_lock(&qm->can_txq_lock[port]);
+ result = (kfifo_in(&qm->can_txq[port][prio].fifo, p, 1) == 1);
+ mutex_unlock(&qm->can_txq_lock[port]);
+ return result;
+}
+
+/**
+ * qm_can_txq_out() - get data from the CAN tx queue
+ * @qm: address of the queue manager to be used
+ * @p: address of the data to be copied
+ * @port: port number of which CAN queue array to be copied
+ * @prio: priority of which CAN queue to be copied
+ */
+static inline bool qm_can_txq_out(struct companion_queue_manager *qm,
+ struct companion_packet *p,
+ u8 port,
+ u8 prio)
+{
+ return kfifo_out(&qm->can_txq[port][prio].fifo, p, 1) == 1;
+}
+
+/**
+ * qm_can_rxq_in() - put data into CAN rx queue
+ * @qm: address of the queue manager to be used
+ * @p: address of the data to be put
+ * @port: port number of which CAN queue to be put
+ */
+static inline bool qm_can_rxq_in(struct companion_queue_manager *qm,
+ const struct companion_packet *p,
+ u8 port)
+{
+ return kfifo_in(&qm->can_rxq[port].fifo, p, 1) == 1;
+}
+
+/**
+ * qm_can_rxq_out() - get data from the CAN rx queue
+ * @qm: address of the queue manager to be used
+ * @p: address of the data to be copied
+ * @port: port number of which CAN queue to be copied
+ */
+static inline bool qm_can_rxq_out(struct companion_queue_manager *qm,
+ struct companion_packet *p,
+ u8 port)
+{
+ return kfifo_out(&qm->can_rxq[port].fifo, p, 1) == 1;
+}
+
+static inline bool qm_can_err_in(struct companion_queue_manager *qm,
+ const struct companion_packet *p,
+ u8 port)
+{
+ return kfifo_in(&qm->can_err[port].fifo, p, 1) == 1;
+}
+
+static inline bool qm_can_err_out(struct companion_queue_manager *qm,
+ struct companion_packet *p,
+ u8 port)
+{
+ return kfifo_out(&qm->can_err[port].fifo, p, 1) == 1;
+}
+
+#endif
diff --git a/include/linux/companion.h b/include/linux/companion.h
new file mode 100644
index 0000000..fdc6258
--- /dev/null
+++ b/include/linux/companion.h
@@ -0,0 +1,259 @@
+/*
+ * Companion low level driver interface
+ *
+ * Copyright (C) 2017 Bosch Sicherheitssysteme GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _BOSCH_COMPANION_H
+#define _BOSCH_COMPANION_H
+
+#include <linux/can/dev.h>
+#include <linux/device.h>
+
+#define COMPANION_PACKET_SIZE 16
+
+/**
+ * struct companion_io_ops - callbacks of companion IO packets handling
+ * @on_tx_done: called when IO packets tx is done
+ * @on_rx_done: called when IO packets rx is done
+ */
+struct companion_io_ops {
+ void (*on_tx_done)(void *data);
+ void (*on_rx_done)(void *data);
+};
+
+/**
+ * struct companion_can_ops - callbacks of companion CAN packets handling
+ * @on_tx_done: called when CAN packets tx is done
+ * @on_rx_done: called when CAN packets rx is done
+ * @on_error: called when CAN error detected
+ * @on_tx_timeout: called when CAN packets tx timeout
+ */
+struct companion_can_ops {
+ void (*on_tx_done)(void *data, u8 prio, bool lost_seq, bool success);
+ void (*on_rx_done)(void *data);
+ void (*on_error)(void *data);
+ void (*on_tx_timeout)(void *data, u8 prio);
+};
+
+/**
+ * companion_io_ops_register() - register companion IO packets handler
+ * @parent: address of the caller parent device to be registered
+ * @ops: address of the IO packets callback
+ * @data: address of the IO packets callback argument
+ */
+int companion_io_ops_register(struct device *parent,
+ struct companion_io_ops *ops,
+ void *data);
+
+/**
+ * companion_io_ops_unregister() - unregister companion IO packets handler
+ * @parent: address of the caller parent device to be unregistered
+ */
+int companion_io_ops_unregister(struct device *parent);
+
+/**
+ * companion_can_ops_register() - register companion CAN packets handler
+ * @parent: address of the caller parent device to be registered
+ * @ops: address of the CAN packets callback
+ * @data: address of the CAN packets callback argument
+ */
+int companion_can_ops_register(struct device *parent,
+ u8 port,
+ struct companion_can_ops *ops,
+ void *data);
+
+/**
+ * companion_can_ops_unregister() - unregister comapnion CAN packets handler
+ * @parent: address of the caller parent device to be unregistered
+ * @port: port number of which CAN to be unregistered
+ */
+int companion_can_ops_unregister(struct device *parent, u8 port);
+
+/**
+ * companion_io_txq_is_full() - return true if IO tx queue is full
+ * @parent: address of the caller parent device to be used
+ */
+bool companion_io_txq_is_full(struct device *parent);
+
+/**
+ * companion_io_rxq_is_empty() - return true if IO rx queue is empty
+ * @parent: address of the caller parent device to be used
+ */
+bool companion_io_rxq_is_empty(struct device *parent);
+
+/**
+ * companion_do_io_tx() - send IO packets from user space to companion
+ * @parent: address of the caller parent device to be used
+ * @buf: address of the user space data to be sent
+ * @count: number of bytes to be sent
+ */
+int companion_do_io_tx(struct device *parent,
+ const char __user *buf,
+ size_t count);
+
+/**
+ * companion_do_io_rx() - receive IO packets from companion to user space
+ * @parent: address of the caller parent device to be used
+ * @buf: address of the data to be copied
+ * @count: number of bytes to be copied
+ */
+int companion_do_io_rx(struct device *parent,
+ char __user *buf,
+ size_t count);
+
+/**
+ * companion_do_can_tx() - send CAN data to companion
+ * @parent: address of the caller parent device to be used
+ * @port: port number of which CAN to be sent
+ * @prio: priority of the raw CAN frame to be sent
+ * @cf: address of the raw CAN frame to be sent
+ */
+int companion_do_can_tx(struct device *parent,
+ u8 port,
+ u8 prio,
+ const struct can_frame *cf);
+
+/**
+ * companion_do_can_rx() - receive CAN data from companion
+ * @parent: address of the caller parent device to be used
+ * @port: port number of which CAN to be received
+ * @cf: address of the raw CAN frame to be copied
+ */
+int companion_do_can_rx(struct device *parent,
+ u8 port,
+ struct can_frame *cf);
+
+/**
+ * companion_do_can_err() - receive CAN error from companion
+ * @parent: address of the caller parent device to be used
+ * @port: port number of which CAN to be received
+ * @bec: address of the error counter to be copied
+ * @state: address of the error state to be copied
+ * @code: address of the error code to be copied
+ */
+int companion_do_can_err(struct device *parent,
+ u8 port,
+ struct can_berr_counter *bec,
+ u8 *state,
+ u8 *code);
+
+#define COMPANION_CAN_STATE_WARNING BIT(0)
+#define COMPANION_CAN_STATE_PASSIVE BIT(1)
+#define COMPANION_CAN_STATE_BUS_OFF BIT(2)
+#define COMPANION_CAN_ERROR_STUFF BIT(0)
+#define COMPANION_CAN_ERROR_FORM BIT(1)
+#define COMPANION_CAN_ERROR_ACK BIT(2)
+#define COMPANION_CAN_ERROR_BIT1 BIT(3)
+#define COMPANION_CAN_ERROR_BIT0 BIT(4)
+#define COMPANION_CAN_ERROR_CRC BIT(5)
+#define COMPANION_CAN_ERROR_RXOV BIT(7)
+
+/**
+ * companion_do_set_can_bittiming() - set companion CAN bittiming
+ * @parent: address of the caller parent device to be used
+ * @port: port number of which CAN to be set
+ * @bittiming: the bittiming to be set
+ */
+int companion_do_set_can_bittiming(struct device *parent,
+ u8 port,
+ const struct can_bittiming *bittiming);
+
+/**
+ * companion_do_set_can_mode() - set companion CAN mode
+ * @parent: address of the caller parent device to be used
+ * @port: port number of which CAN to be set
+ * @mode: the mode to be set
+ */
+int companion_do_set_can_mode(struct device *parent,
+ u8 port,
+ enum can_mode mode);
+
+/**
+ * companion_do_set_can_ctrlmode() - set companion CAN control mode
+ * @parent: address of the caller parent device to be used
+ * @port: port number of which CAN to be set
+ * @ctrl: the control mode to be set
+ */
+int companion_do_set_can_ctrlmode(struct device *parent,
+ u8 port,
+ u32 ctrl);
+
+/**
+ * companion_do_get_can_status() - get companion CAN status
+ * @parent: address of the caller parent device to be used
+ * @port: port number of which CAN to be inquiry
+ * @bec: address of the error counter to be copied
+ */
+int companion_do_get_can_status(struct device *parent,
+ u8 port,
+ struct can_berr_counter *bec);
+
+/**
+ * companion_do_get_can_txq_status() - get companion CAN tx queue status
+ * @parent: address of the caller parent device to be used
+ * @port: port number of which CAN to be inquiry
+ * @prio: queue number of which tx queue to be inquiry
+ * @lost_txq_sync: flag of the given CAN tx queue lost sync or not
+ */
+int companion_do_get_can_txq_status(struct device *parent,
+ u8 port,
+ u8 prio,
+ bool *lost_txq_sync);
+
+/**
+ * companion_do_get_can_txq_status_all() - get all companion CAN tx queue status
+ * @parent: address of the caller parent device to be used
+ * @port: port number of which CAN to be inquiry
+ */
+int companion_do_get_can_txq_status_all(struct device *parent,
+ u8 port);
+
+/**
+ * companion_do_can_txq_is_full() - inquiry companion CAN tx queue is full
+ * @parent: address of the caller parent device to be used
+ * @port: port number of which CAN to be inquiry
+ * @prio: queue number of which tx queue to be inquiry
+ * @is_full: address of the is full result to be copied
+ */
+int companion_do_can_txq_is_full(struct device *parent,
+ u8 port,
+ u8 prio,
+ bool *is_full);
+
+/**
+ * companion_do_can_txq_has_space() - inquiry companion CAN tx queue has space
+ * @parent: address of the caller parent device to be used
+ * @port: port number of which CAN to be inquiry
+ * @prio: queue number of which tx queue to be inquiry
+ * @has_space: address of the has_space result to be copied
+ */
+int companion_do_can_txq_has_space(struct device *parent,
+ u8 port,
+ u8 prio,
+ bool *has_space);
+
+/**
+ * companion_do_can_start_tx_timer() - start companioin CAN tx timeout detection
+ * @parent: address of the caller parent device to be used
+ * @port: port number of which CAN to be used
+ * @prio: queue number of which tx queue's timer to be used
+ */
+int companion_do_can_start_tx_timer(struct device *parent,
+ u8 port,
+ u8 prio);
+
+/**
+ * companion_do_can_stop_tx_timer() - stop companion CAN tx timeout detection
+ * @parent: address of the caller parent device to be used
+ * @port: port number of which CAN to be used
+ * @prio: queue number of which tx queue's timer to be used
+ */
+int companion_do_can_stop_tx_timer(struct device *parent,
+ u8 port,
+ u8 prio);
+#endif
--
2.7.4
\
 
 \ /
  Last update: 2018-06-13 16:39    [W:0.307 / U:3.680 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site