lkml.org 
[lkml]   [2018]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/5] dt: qcom: 8996: thermal: Move to DT initialisation
Date
We also split up the regmap address space into two, one for the TM
registers, the other for the SROT registers. This was required to deal with
different address offsets for the TM and SROT registers across different
SoC families.

Since tsens-common.c/init_common() currently only registers one address space, the order is important (TM before SROT).This is OK since the code doesn't really use the SROT functionality yet.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 12 +++++++++++-
drivers/thermal/qcom/tsens-8996.c | 1 -
2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 410ae78..b4aab18 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -451,7 +451,17 @@

tsens0: thermal-sensor@4a8000 {
compatible = "qcom,msm8996-tsens";
- reg = <0x4a8000 0x2000>;
+ reg = <0x4a9000 0x1000>, /* TM */
+ <0x4a8000 0x1000>; /* SROT */
+ #qcom,sensors = <13>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@4ac000 {
+ compatible = "qcom,msm8996-tsens";
+ reg = <0x4ad000 0x1000>, /* TM */
+ <0x4ac000 0x1000>; /* SROT */
+ #qcom,sensors = <8>;
#thermal-sensor-cells = <1>;
};

diff --git a/drivers/thermal/qcom/tsens-8996.c b/drivers/thermal/qcom/tsens-8996.c
index e1f7781..6e59078 100644
--- a/drivers/thermal/qcom/tsens-8996.c
+++ b/drivers/thermal/qcom/tsens-8996.c
@@ -79,6 +79,5 @@ static const struct tsens_ops ops_8996 = {
};

const struct tsens_data data_8996 = {
- .num_sensors = 13,
.ops = &ops_8996,
};
--
2.7.4
\
 
 \ /
  Last update: 2018-06-12 12:57    [W:0.096 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site