lkml.org 
[lkml]   [2018]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/6] arm: dts: Change PCIe INTx mapping for Cygnus
From
Date
On 05/29/2018 02:58 PM, Ray Jui wrote:
> Change the PCIe INTx mapping to model the 4 INTx interrupts in the
> IRQ domain of the iProc PCIe controller itself
>
> Signed-off-by: Ray Jui <ray.jui@broadcom.com>
> ---
> arch/arm/boot/dts/bcm-cygnus.dtsi | 18 ++++++++++++++----
> 1 file changed, 14 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
> index 699fdf9..6de21ef 100644
> --- a/arch/arm/boot/dts/bcm-cygnus.dtsi
> +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
> @@ -254,9 +254,14 @@
> compatible = "brcm,iproc-pcie";
> reg = <0x18012000 0x1000>;
>
> + interrupt-controller;
> #interrupt-cells = <1>;
> - interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
> + interrupt-map-mask = <0 0 0 7>;
> + interrupt-map = <0 0 0 1 &pcie0 1>,
> + <0 0 0 2 &pcie0 2>,
> + <0 0 0 3 &pcie0 3>,
> + <0 0 0 4 &pcie0 4>;
> + interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>;

You would want to fix those IRQ_TYPE_NONE values as well because since
commit 83a86fbb5b56b5eed8a476cc3fe214077d7c4f49 ("irqchip/gic: Loudly
complain about the use of IRQ_TYPE_NONE") this is going to create some
nice warnings on boot.

I am about to send fixes for NSP and HR2 since that's what I have access
to at the moment, but it would be good if you could send updates to the
Cygnus and NS2 DTS files?

Thanks

>
> linux,pci-domain = <0>;
>
> @@ -289,9 +294,14 @@
> compatible = "brcm,iproc-pcie";
> reg = <0x18013000 0x1000>;
>
> + interrupt-controller;
> #interrupt-cells = <1>;
> - interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
> + interrupt-map-mask = <0 0 0 7>;
> + interrupt-map = <0 0 0 1 &pcie1 1>,
> + <0 0 0 2 &pcie1 2>,
> + <0 0 0 3 &pcie1 3>,
> + <0 0 0 4 &pcie1 4>;
> + interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
>
> linux,pci-domain = <1>;
>
>


--
Florian

\
 
 \ /
  Last update: 2018-06-12 00:37    [W:0.151 / U:0.116 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site