lkml.org 
[lkml]   [2018]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 2/2] regulator: add QCOM RPMh regulator driver
On Fri, Jun 08, 2018 at 04:44:15PM -0700, David Collins wrote:
> Add the QCOM RPMh regulator driver to manage PMIC regulators
> which are controlled via RPMh on some Qualcomm Technologies, Inc.
> SoCs. RPMh is a hardware block which contains several
> accelerators which are used to manage various hardware resources
> that are shared between the processors of the SoC. The final
> hardware state of a regulator is determined within RPMh by
> performing max aggregation of the requests made by all of the
> processors.
>
> Add support for PMIC regulator control via the voltage regulator
> manager (VRM) and oscillator buffer (XOB) RPMh accelerators.
> VRM supports manipulation of enable state, voltage, and mode.
> XOB supports manipulation of enable state.
>
> Signed-off-by: David Collins <collinsd@codeaurora.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> ---
> drivers/regulator/Kconfig | 9 +
> drivers/regulator/Makefile | 1 +
> drivers/regulator/qcom-rpmh-regulator.c | 753 ++++++++++++++++++++++++++++++++
> 3 files changed, 763 insertions(+)
> create mode 100644 drivers/regulator/qcom-rpmh-regulator.c

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

\
 
 \ /
  Last update: 2018-06-11 19:20    [W:0.038 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site