lkml.org 
[lkml]   [2018]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 2/5] efi: Add embedded peripheral firmware support
From
Date
On 06/01/2018 05:53 AM, Hans de Goede wrote:
>
> Reported-by: Dave Olsthoorn <dave@bewaar.me>
> Suggested-by: Peter Jones <pjones@redhat.com>
> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> ---
> .../driver-api/firmware/request_firmware.rst | 76 +++++++++
> drivers/base/firmware_loader/Makefile | 1 +
> drivers/base/firmware_loader/fallback.h | 12 ++
> drivers/base/firmware_loader/fallback_efi.c | 56 +++++++
> drivers/base/firmware_loader/main.c | 2 +
> drivers/firmware/efi/Kconfig | 3 +
> drivers/firmware/efi/Makefile | 1 +
> drivers/firmware/efi/embedded-firmware.c | 148 ++++++++++++++++++
> include/linux/efi.h | 6 +
> include/linux/efi_embedded_fw.h | 25 +++
> include/linux/fs.h | 1 +
> init/main.c | 3 +
> 12 files changed, 334 insertions(+)
> create mode 100644 drivers/base/firmware_loader/fallback_efi.c
> create mode 100644 drivers/firmware/efi/embedded-firmware.c
> create mode 100644 include/linux/efi_embedded_fw.h
>
> diff --git a/Documentation/driver-api/firmware/request_firmware.rst b/Documentation/driver-api/firmware/request_firmware.rst
> index f62bdcbfed5b..66ab91f3357d 100644
> --- a/Documentation/driver-api/firmware/request_firmware.rst
> +++ b/Documentation/driver-api/firmware/request_firmware.rst
> @@ -73,3 +73,79 @@ If something went wrong request_firmware() returns non-zero and fw_entry
> is set to NULL. Once your driver is done with processing the firmware it
> can call call release_firmware(fw_entry) to release the firmware image
> and any related resource.
> +
> +EFI embedded firmware support
> +=============================
> +
> +On some devices the system's EFI code / ROM may contain an embedded copy
> +of firmware for some of the system's integrated peripheral devices and
> +the peripheral's Linux device-driver needs to access this firmware.
> +
> +A device driver which needs this can describe the firmware it needs
> +using an efi_embedded_fw_desc struct:
> +
> +.. kernel-doc:: include/linux/efi_embedded_fw.h
> + :functions: efi_embedded_fw_desc
> +
> +The EFI embedded-fw code works by scanning all EFI_BOOT_SERVICES_CODE memory
> +segments for an eight byte sequence matching prefix, if the prefix is found it

prefix; if

> +then does a crc32 over length bytes and if that matches makes a copy of length
> +bytes and adds that to its list with found firmwares.
> +
> +To avoid doing this somewhat expensive scan on all systems, dmi matching is
> +used. Drivers are expected to export a dmi_system_id array, with each entries'
> +driver_data pointing to an efi_embedded_fw_desc.
> +
> +To register this array with the efi-embedded-fw code, a driver needs to:
> +
> +1. Always be builtin to the kernel or store the dmi_system_id array in a
> + separate object file which always gets builtin.
> +
> +2. Add an extern declaration for the dmi_system_id array to
> + include/linux/efi_embedded_fw.h.
> +
> +3. Add the dmi_system_id array to the embedded_fw_table in
> + drivers/firmware/efi/embedded-firmware.c wrapped in a #ifdef testing that
> + the driver is being builtin.
> +
> +4. Add "select EFI_EMBEDDED_FIRMWARE if EFI_STUB" to its Kconfig entry.
> +
> +The request_firmware() function will always first try to load firmware with
> +the specified name directly from the disk, so the EFI embedded-fw can always
> +be overridden by placing a file under /lib/firmare.

/lib/firmware.

> +
> +To make request_firmware() fallback to trying EFI embedded firmwares after this,
> +the driver must set a boolean "efi-embedded-firmware" device-property on the
> +device before passing it to request_firmware(). Note that this disables the
> +usual usermodehelper fallback, so you may want to only set this on systems
> +which match your dmi_system_id array.
> +
> +Once the device-property is set, the driver can use the regular
> +request_firmware() function to get the firmware, using the name filled in
> +in the efi_embedded_fw_desc.
> +
> +Note that:
> +
> +1. The code scanning for EFI embbedded-firmware runs near the end
> + of start_kernel(), just before calling rest_init(). For normal drivers and
> + subsystems using subsys_initcall() to register themselves this does not
> + matter. This means that code running earlier cannot use EFI
> + embbedded-firmware.
> +
> +2. ATM the EFI embedded-fw code assumes that firmwares always start at an offset

s/ATM/At the moment/

> + which is a multiple of 8 bytes, if this is not true for your case send in

bytes; if

> + a patch to fix this.
> +
> +3. ATM the EFI embedded-fw code only works on x86 because other archs free

At the moment

> + EFI_BOOT_SERVICES_CODE before the EFI embedded-fw code gets a chance to
> + scan it.
> +
> +4. The current brute-force scanning of EFI_BOOT_SERVICES_CODE is an ad-hoc
> + brute-force solution. There has been discussion to use the PI spec's
> + Firmware Volume protocol. This has been rejected because the FV Protocol
> + relies on *internal* interfaces of PI spec, and:
> + 1. The The PI spec does not define firmware at all
> + 2. The internal interfaces of PI Spec does not guarantee any backward
> + compatibility. Any implementation details in FV may be subject to change,
> + and may vary system to system. Supporting the FV Protocol would be
> + difficult as it is purposely ambiguous.

What/where is this PI spec?

thanks,
--
~Randy

\
 
 \ /
  Last update: 2018-06-02 01:41    [W:0.127 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site