lkml.org 
[lkml]   [2018]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/8] serial: 8250: Make em485_rts_after_send() set mctrl according to rts state.
Date
When rs485 enabled and RTS_AFTER_SEND set on startup, need to preserve
mctrl status, because later functions will call set_mctrl passing
port->mctrl=0 overriding rts status, resulting in rts pin in
transmission when idle.

Make mctrl reflect rts pin state.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
---
drivers/tty/serial/8250/8250_port.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index e14badbbf181..8432445c80e5 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -562,10 +562,13 @@ static inline void serial8250_em485_rts_after_send(struct uart_8250_port *p)
{
unsigned char mcr = serial8250_in_MCR(p);

- if (p->port.rs485.flags & SER_RS485_RTS_AFTER_SEND)
+ if (p->port.rs485.flags & SER_RS485_RTS_AFTER_SEND) {
mcr |= UART_MCR_RTS;
- else
+ p->port.mctrl |= TIOCM_RTS;
+ } else {
mcr &= ~UART_MCR_RTS;
+ p->port.mctrl &= ~TIOCM_RTS;
+ }
serial8250_out_MCR(p, mcr);
}

--
2.17.0
\
 
 \ /
  Last update: 2018-06-01 14:42    [W:0.207 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site