lkml.org 
[lkml]   [2018]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
On Fri, Jun 1, 2018 at 3:23 PM, Sakari Ailus <sakari.ailus@iki.fi> wrote:
> On Fri, Jun 01, 2018 at 10:49:56AM +0530, Jagan Teki wrote:
>> Hi Philipp,
>>
>> On Fri, Jun 1, 2018 at 12:36 AM, Philipp Zabel <pza@pengutronix.de> wrote:
>> > Hi Jagan,
>> >
>> > On Thu, May 31, 2018 at 08:39:20PM +0530, Jagan Teki wrote:
>> >> Hi All,
>> >>
>> >> I'm trying to verify MIPI-CSI2 OV5640 camera on i.MX6 platform with
>> >> Mainline Linux.
>> >>
>> >> I've followed these[1] instructions to configure MC links and pads
>> >> based on the probing details from dmesg and trying to capture
>> >> ipu1_ic_prpenc capture (/dev/video1) but it's not working.
>> >>
>> >> Can anyone help me to verify whether I configured all the details
>> >> properly if not please suggest.
>> >>
>> >> I'm pasting full log here, so-that anyone can comment in line and dt
>> >> changes are at [2]
>> >>
>> >> Log:
>> >> -----
>> > [...]
>> >> # media-ctl -l "'ov5640 2-003c':0 -> 'imx6-mipi-csi2':0[1]"
>> >> # media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
>> >> # media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
>> >> # media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
>> >> # media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
>> >
>> > Here you configure a pipeline that ends at ipu1 prpenc capture ...
>> >
>> >> # med# media-ctl -p
>> > [...]
>> >> - entity 18: ipu1_ic_prpenc capture (1 pad, 1 link)
>> >> type Node subtype V4L flags 0
>> >> device node name /dev/video0
>> >
>> > ... which is /dev/video0 ...
>> >
>> > [...]
>> >> - entity 27: ipu1_ic_prpvf capture (1 pad, 1 link)
>> >> type Node subtype V4L flags 0
>> >> device node name /dev/video1
>> >
>> > ... not /dev/video1 ...
>>
>> True, thanks for pointing it.
>>
>> I actually tried even on video0 which I forgot to post the log [4].
>> Now I understand I'm trying for wrong device to capture look like
>> video0 which is ipu1 prepenc firing kernel oops. I'm trying to debug
>> this and let me know if have any suggestion to look into.
>>
>> [ 56.800074] imx6-mipi-csi2: LP-11 timeout, phy_state = 0x000002b0
>> [ 57.369660] ipu1_ic_prpenc: EOF timeout
>> [ 57.849692] ipu1_ic_prpenc: wait last EOF timeout
>> [ 57.855703] ipu1_ic_prpenc: pipeline start failed with -110
>
> I don't have the hardware but this looks like the host cannot detect the
> LP-11 state on the sensor (both wires high?). Some sensors cannot do this
> without starting streaming at the same time. I'd expect the same if there
> are problems in lane configuration etc.

You mean the lane configurations in hardware? but this sensor is
working with imx kernel. what do you mean by wires here? lanes.

Jagan.

--
Jagan Teki
Senior Linux Kernel Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.

\
 
 \ /
  Last update: 2018-06-01 13:41    [W:0.503 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site