lkml.org 
[lkml]   [2018]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 25/43] IB/mlx5: Use unlimited rate when static rate is not supported
Date
4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Danit Goldberg <danitg@mellanox.com>

commit 4f32ac2e452c2180cd2df581cbadac183e27ecd0 upstream.

Before the change, if the user passed a static rate value different
than zero and the FW doesn't support static rate,
it would end up configuring rate of 2.5 GBps.

Fix this by using rate 0; unlimited, in cases where FW
doesn't support static rate configuration.

Cc: <stable@vger.kernel.org> # 3.10
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/infiniband/hw/mlx5/qp.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)

--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -2199,18 +2199,18 @@ enum {

static int ib_rate_to_mlx5(struct mlx5_ib_dev *dev, u8 rate)
{
- if (rate == IB_RATE_PORT_CURRENT) {
+ if (rate == IB_RATE_PORT_CURRENT)
return 0;
- } else if (rate < IB_RATE_2_5_GBPS || rate > IB_RATE_300_GBPS) {
+
+ if (rate < IB_RATE_2_5_GBPS || rate > IB_RATE_300_GBPS)
return -EINVAL;
- } else {
- while (rate != IB_RATE_2_5_GBPS &&
- !(1 << (rate + MLX5_STAT_RATE_OFFSET) &
- MLX5_CAP_GEN(dev->mdev, stat_rate_support)))
- --rate;
- }

- return rate + MLX5_STAT_RATE_OFFSET;
+ while (rate != IB_RATE_PORT_CURRENT &&
+ !(1 << (rate + MLX5_STAT_RATE_OFFSET) &
+ MLX5_CAP_GEN(dev->mdev, stat_rate_support)))
+ --rate;
+
+ return rate ? rate + MLX5_STAT_RATE_OFFSET : rate;
}

static int modify_raw_packet_eth_prio(struct mlx5_core_dev *dev,

\
 
 \ /
  Last update: 2018-05-08 10:41    [W:0.157 / U:3.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site