lkml.org 
[lkml]   [2018]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v0 0/2] Add sdmmc UHS support to ROC-RK3328-CC board
Date
From: Levin Du <djw@t-chip.com.cn>

Hi all,

This is an attemp to add sdmmc UHS support to the ROC-RK3328-CC board.

It adds a new compatible `rockchip,rk3328-gpio-syscon10` to the gpio-syscon
driver, so that a new gpio controller named `gpio_syscon10` can be defined
and used in the regulator-gpio. This regulator controls the signal voltage of the
sdmmc. It is essential for UHS support which requires 1.8V signal voltage.


Levin Du (2):
gpio: syscon: Add gpio-syscon for rk3328
arm64: dts: rockchip: Add sdmmc UHS support for roc-rk3328-cc

arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 36 ++++++++++++++++++++++++++
drivers/gpio/gpio-syscon.c | 32 +++++++++++++++++++++++
2 files changed, 68 insertions(+)

--
2.7.4


\
 
 \ /
  Last update: 2018-05-08 04:50    [W:0.040 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site