lkml.org 
[lkml]   [2018]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 5/6] ARM: dts: Add generic interconnect target module node for MCAN
* Faiz Abbas <faiz_abbas@ti.com> [180531 11:27]:
> On Thursday 31 May 2018 09:36 AM, Rob Herring wrote:
> > On Wed, May 30, 2018 at 07:41:32PM +0530, Faiz Abbas wrote:
> >> --- a/arch/arm/boot/dts/dra76x.dtsi
> >> +++ b/arch/arm/boot/dts/dra76x.dtsi
> >> @@ -11,6 +11,25 @@
> >> / {
> >> compatible = "ti,dra762", "ti,dra7";
> >>
> >> + ocp {
> >> +
> >> + target-module@0x42c00000 {
> >
> > Build your dtb with W=1 and fix warnings you add (drop '0x').
>
> Sure, Will fix this.
> >
> > This is a CAN bus controller? If so, then use 'can' for node name.
>
> Yes but I am using m_can along the lines of dcan in other boards (For
> example, see arch/arm/boot/dts/am33xx.dtsi:1046). Are you saying all CAN
> controllers should only be called can?

The module should be target-module@42c00000 and the child(ren)
can@1a00 or mcan@1a00 if mcan is different from can.

Regards,

Tony

\
 
 \ /
  Last update: 2018-05-31 15:42    [W:0.093 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site