lkml.org 
[lkml]   [2018]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 7/9] PM / Domains: Split genpd_dev_pm_attach()
From
Date

On 29/05/18 11:04, Ulf Hansson wrote:
> To extend genpd to deal with allowing multiple PM domains per device, some
> of the code in genpd_dev_pm_attach() can be re-used. Let's prepare for this
> by moving some of the code into a sub-function.
>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> ---
> drivers/base/power/domain.c | 60 ++++++++++++++++++++-----------------
> 1 file changed, 33 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
> index 12a20f21974d..2af99bfcbe3c 100644
> --- a/drivers/base/power/domain.c
> +++ b/drivers/base/power/domain.c
> @@ -2221,38 +2221,15 @@ static void genpd_dev_pm_sync(struct device *dev)
> genpd_queue_power_off_work(pd);
> }
>
> -/**
> - * genpd_dev_pm_attach - Attach a device to its PM domain using DT.
> - * @dev: Device to attach.
> - *
> - * Parse device's OF node to find a PM domain specifier. If such is found,
> - * attaches the device to retrieved pm_domain ops.
> - *
> - * Returns 1 on successfully attached PM domain, 0 when the device don't need a
> - * PM domain or when multiple power-domains exists for it, else a negative error
> - * code. Note that if a power-domain exists for the device, but it cannot be
> - * found or turned on, then return -EPROBE_DEFER to ensure that the device is
> - * not probed and to re-try again later.
> - */
> -int genpd_dev_pm_attach(struct device *dev)
> +static int __genpd_dev_pm_attach(struct device *dev, struct device_node *np,
> + unsigned int index)
> {
> struct of_phandle_args pd_args;
> struct generic_pm_domain *pd;
> int ret;
>
> - if (!dev->of_node)
> - return 0;
> -
> - /*
> - * Devices with multiple PM domains must be attached separately, as we
> - * can only attach one PM domain per device.
> - */
> - if (of_count_phandle_with_args(dev->of_node, "power-domains",
> - "#power-domain-cells") != 1)
> - return 0;
> -
> - ret = of_parse_phandle_with_args(dev->of_node, "power-domains",
> - "#power-domain-cells", 0, &pd_args);
> + ret = of_parse_phandle_with_args(np, "power-domains",
> + "#power-domain-cells", index, &pd_args);
> if (ret < 0)
> return ret;
>
> @@ -2290,6 +2267,35 @@ int genpd_dev_pm_attach(struct device *dev)
>
> return ret ? -EPROBE_DEFER : 1;
> }
> +
> +/**
> + * genpd_dev_pm_attach - Attach a device to its PM domain using DT.
> + * @dev: Device to attach.
> + *
> + * Parse device's OF node to find a PM domain specifier. If such is found,
> + * attaches the device to retrieved pm_domain ops.
> + *
> + * Returns 1 on successfully attached PM domain, 0 when the device don't need a
> + * PM domain or when multiple power-domains exists for it, else a negative error
> + * code. Note that if a power-domain exists for the device, but it cannot be
> + * found or turned on, then return -EPROBE_DEFER to ensure that the device is
> + * not probed and to re-try again later.
> + */
> +int genpd_dev_pm_attach(struct device *dev)
> +{
> + if (!dev->of_node)
> + return 0;
> +
> + /*
> + * Devices with multiple PM domains must be attached separately, as we
> + * can only attach one PM domain per device.
> + */
> + if (of_count_phandle_with_args(dev->of_node, "power-domains",
> + "#power-domain-cells") != 1)
> + return 0;
> +
> + return __genpd_dev_pm_attach(dev, dev->of_node, 0);
> +}
> EXPORT_SYMBOL_GPL(genpd_dev_pm_attach);
>
> static const struct of_device_id idle_state_match[] = {

Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>

Cheers
Jon

--
nvpublic

\
 
 \ /
  Last update: 2018-05-30 18:08    [W:0.116 / U:102.720 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site