Messages in this thread Patch in this message | | | Date | Wed, 30 May 2018 15:46:46 +0200 | From | Ivan Djelic <> | Subject | Re: [PATCH] lib/bch: Remove VLA usage |
| |
On Tue, May 29, 2018 at 03:42:07PM -0700, Kees Cook wrote: > In the quest to remove all stack VLA usage from the kernel[1], this removes > the on-stack working buffers in favor of pre-allocated working buffers > (which were already used in other places). Since these routines must > already be serialized (since they work on bch->ecc_buf), adding the usage > of bch->ecc_work would be similarly safe. Additionally, since "max m" is > only 15, this was adjusted to just use a fixed size array in those cases.
Hi Kees,
Using an on-stack buffer instead of a pre-allocated buffer was done initially for performance reasons. For "usual" (m,t) values (for instance m=13, t=4), there is a huge performance difference between the on-stack buffer version and the kmalloc version. I didn't investigate the reason for this, but I ran a quick benchmark on my PC:
little-endian, type sizes: int=4 long=8 longlong=8 cpu: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz calibration: iter=4.9143µs niter=2034 nsamples=200 m=13 t=4
Buffer allocation | Encoding throughput (Mbit/s) --------------------------------------------------- on-stack, VLA | 3988 on-stack, fixed | 4494 kmalloc | 1967
The first line shows the performance of the current code, using a VLA. The second line shows the performance when r[] is allocated on the stack with a fixed, constant size (the maximum allowed value). The third line shows the performance when r is a pre-allocated working buffer.
In fact, when using a pre-allocated buffer there is no need to introduce 'ecc_work': you can directly point 'r' to bch->ecc_buf and remove memcpy() surrounding the 'while (mlen--)' loop. Everything happens inside the 'bch->ecc_buf' buffer. But with a big performance penalty. Looks like declaring a temporary buffer on the stack to store ECC values allows GCC to do a better job at optimizing the loop.
So rather than introducing 'ecc_work', I suggest we compute the maximum allowed size for r[] and use that:
sizeof(r) = sizeof(uint32_t)*(l+1) l+1 = BCH_ECC_WORDS(bch) = DIV_ROUND_UP(m*t, 32)
We also know that:
m*t < 2^m - 1 (ECC maximum size)
therefore:
l+1 < DIV_ROUND_UP(2^m - 1, 32) < 2^(m-5)
So instead of 'uint32_t r[l+1]' we could declare 'uint32_t r[1 << (BCH_MAX_M-5)]'. And replace 'sizeof(r)' with 'sizeof(*bch->ecc_buf)*(l+1)' in memset/memcpy calls. In practice the actual maximum size of r[] is (1 << (15-5))*sizeof(uint32_t) = 4096 bytes.
What do you think ? -- Ivan
> [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com > > Signed-off-by: Kees Cook <keescook@chromium.org> > --- > This is directed at linux-mtd because it's the only user of this library > and it's how it originally entered the kernel tree... > --- > include/linux/bch.h | 4 ++-- > lib/bch.c | 27 +++++++++++++++------------ > 2 files changed, 17 insertions(+), 14 deletions(-) > > diff --git a/include/linux/bch.h b/include/linux/bch.h > index 295b4ef153bb..4d46e6a73319 100644 > --- a/include/linux/bch.h > +++ b/include/linux/bch.h > @@ -39,7 +39,7 @@ > * @a_log_tab: Galois field GF(2^m) log lookup table > * @mod8_tab: remainder generator polynomial lookup tables > * @ecc_buf: ecc parity words buffer > - * @ecc_buf2: ecc parity words buffer > + * @ecc_work: ecc parity words working buffer > * @xi_tab: GF(2^m) base for solving degree 2 polynomial roots > * @syn: syndrome buffer > * @cache: log-based polynomial representation buffer > @@ -57,7 +57,7 @@ struct bch_control { > uint16_t *a_log_tab; > uint32_t *mod8_tab; > uint32_t *ecc_buf; > - uint32_t *ecc_buf2; > + uint32_t *ecc_work; > unsigned int *xi_tab; > unsigned int *syn; > int *cache; > diff --git a/lib/bch.c b/lib/bch.c > index bc89dfe4d1b3..f14eac93ecc4 100644 > --- a/lib/bch.c > +++ b/lib/bch.c > @@ -78,10 +78,12 @@ > #define GF_M(_p) (CONFIG_BCH_CONST_M) > #define GF_T(_p) (CONFIG_BCH_CONST_T) > #define GF_N(_p) ((1 << (CONFIG_BCH_CONST_M))-1) > +#define BCH_MAX_M (CONFIG_BCH_CONST_M) > #else > #define GF_M(_p) ((_p)->m) > #define GF_T(_p) ((_p)->t) > #define GF_N(_p) ((_p)->n) > +#define BCH_MAX_M 15 > #endif > > #define BCH_ECC_WORDS(_p) DIV_ROUND_UP(GF_M(_p)*GF_T(_p), 32) > @@ -187,7 +189,7 @@ void encode_bch(struct bch_control *bch, const uint8_t *data, > const unsigned int l = BCH_ECC_WORDS(bch)-1; > unsigned int i, mlen; > unsigned long m; > - uint32_t w, r[l+1]; > + uint32_t w; > const uint32_t * const tab0 = bch->mod8_tab; > const uint32_t * const tab1 = tab0 + 256*(l+1); > const uint32_t * const tab2 = tab1 + 256*(l+1); > @@ -198,7 +200,7 @@ void encode_bch(struct bch_control *bch, const uint8_t *data, > /* load ecc parity bytes into internal 32-bit buffer */ > load_ecc8(bch, bch->ecc_buf, ecc); > } else { > - memset(bch->ecc_buf, 0, sizeof(r)); > + memset(bch->ecc_work, 0, bch->ecc_bytes); > } > > /* process first unaligned data bytes */ > @@ -215,7 +217,7 @@ void encode_bch(struct bch_control *bch, const uint8_t *data, > mlen = len/4; > data += 4*mlen; > len -= 4*mlen; > - memcpy(r, bch->ecc_buf, sizeof(r)); > + memcpy(bch->ecc_work, bch->ecc_buf, bch->ecc_bytes); > > /* > * split each 32-bit word into 4 polynomials of weight 8 as follows: > @@ -229,6 +231,8 @@ void encode_bch(struct bch_control *bch, const uint8_t *data, > * xxxxxxxx yyyyyyyy zzzzzzzz tttttttt mod g = r0^r1^r2^r3 > */ > while (mlen--) { > + uint32_t *r = bch->ecc_work; > + > /* input data is read in big-endian format */ > w = r[0]^cpu_to_be32(*pdata++); > p0 = tab0 + (l+1)*((w >> 0) & 0xff); > @@ -241,7 +245,7 @@ void encode_bch(struct bch_control *bch, const uint8_t *data, > > r[l] = p0[l]^p1[l]^p2[l]^p3[l]; > } > - memcpy(bch->ecc_buf, r, sizeof(r)); > + memcpy(bch->ecc_buf, bch->ecc_work, bch->ecc_bytes); > > /* process last unaligned bytes */ > if (len) > @@ -434,7 +438,7 @@ static int solve_linear_system(struct bch_control *bch, unsigned int *rows, > { > const int m = GF_M(bch); > unsigned int tmp, mask; > - int rem, c, r, p, k, param[m]; > + int rem, c, r, p, k, param[BCH_MAX_M]; > > k = 0; > mask = 1 << m; > @@ -1009,10 +1013,10 @@ int decode_bch(struct bch_control *bch, const uint8_t *data, unsigned int len, > } > /* load received ecc or assume it was XORed in calc_ecc */ > if (recv_ecc) { > - load_ecc8(bch, bch->ecc_buf2, recv_ecc); > + load_ecc8(bch, bch->ecc_work, recv_ecc); > /* XOR received and calculated ecc */ > for (i = 0, sum = 0; i < (int)ecc_words; i++) { > - bch->ecc_buf[i] ^= bch->ecc_buf2[i]; > + bch->ecc_buf[i] ^= bch->ecc_work[i]; > sum |= bch->ecc_buf[i]; > } > if (!sum) > @@ -1114,7 +1118,7 @@ static int build_deg2_base(struct bch_control *bch) > { > const int m = GF_M(bch); > int i, j, r; > - unsigned int sum, x, y, remaining, ak = 0, xi[m]; > + unsigned int sum, x, y, remaining, ak = 0, xi[BCH_MAX_M]; > > /* find k s.t. Tr(a^k) = 1 and 0 <= k < m */ > for (i = 0; i < m; i++) { > @@ -1254,7 +1258,6 @@ struct bch_control *init_bch(int m, int t, unsigned int prim_poly) > struct bch_control *bch = NULL; > > const int min_m = 5; > - const int max_m = 15; > > /* default primitive polynomials */ > static const unsigned int prim_poly_tab[] = { > @@ -1270,7 +1273,7 @@ struct bch_control *init_bch(int m, int t, unsigned int prim_poly) > goto fail; > } > #endif > - if ((m < min_m) || (m > max_m)) > + if ((m < min_m) || (m > BCH_MAX_M)) > /* > * values of m greater than 15 are not currently supported; > * supporting m > 15 would require changing table base type > @@ -1300,7 +1303,7 @@ struct bch_control *init_bch(int m, int t, unsigned int prim_poly) > bch->a_log_tab = bch_alloc((1+bch->n)*sizeof(*bch->a_log_tab), &err); > bch->mod8_tab = bch_alloc(words*1024*sizeof(*bch->mod8_tab), &err); > bch->ecc_buf = bch_alloc(words*sizeof(*bch->ecc_buf), &err); > - bch->ecc_buf2 = bch_alloc(words*sizeof(*bch->ecc_buf2), &err); > + bch->ecc_work = bch_alloc(words*sizeof(*bch->ecc_work), &err); > bch->xi_tab = bch_alloc(m*sizeof(*bch->xi_tab), &err); > bch->syn = bch_alloc(2*t*sizeof(*bch->syn), &err); > bch->cache = bch_alloc(2*t*sizeof(*bch->cache), &err); > @@ -1349,7 +1352,7 @@ void free_bch(struct bch_control *bch) > kfree(bch->a_log_tab); > kfree(bch->mod8_tab); > kfree(bch->ecc_buf); > - kfree(bch->ecc_buf2); > + kfree(bch->ecc_work); > kfree(bch->xi_tab); > kfree(bch->syn); > kfree(bch->cache); > -- > 2.17.0 > > > -- > Kees Cook > Pixel Security
| |