lkml.org 
[lkml]   [2018]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 3/6] DTS: gta04: add uart2 child node for w2sg0004 GPS receiver
Date
GTA04 has a W2SG0004 module connected to UART2 of the OMAP3
processor. A GPIO can pulse the on/off toggle switch.

Note that there is no WAKEUP output from the W2SG0004,
hence we can't use the generic SirfStar binding.

The VSIM regulator is used to power on/off the LNA of an
external active GPS antenna so that a driver can turn the
LNA off if GPS is not needed to save battery energy.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
arch/arm/boot/dts/omap3-gta04.dtsi | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 4170be70460e..1c9e1ccf2346 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -478,6 +478,13 @@
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
+
+ gps: gps {
+ compatible = "wi2wi,w2sg0004";
+ lna-supply = <&vsim>; /* LNA regulator */
+ /* GPIO_145: trigger for on/off-impulse for w2sg0004 */
+ enable-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+ };
};

&uart3 {
--
2.12.2
\
 
 \ /
  Last update: 2018-05-03 11:37    [W:0.099 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site