lkml.org 
[lkml]   [2018]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/7] scsi: ufs: Update config descriptor documentation
Date
This change updates the sysfs documentation for the UFS config
descriptor, now that config descriptor fields are writable.

Signed-off-by: Evan Green <evgreen@chromium.org>
---
Documentation/ABI/testing/sysfs-driver-ufs | 17 -----------------
1 file changed, 17 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs
index da154a0d4b4f..d11b0a91f4b2 100644
--- a/Documentation/ABI/testing/sysfs-driver-ufs
+++ b/Documentation/ABI/testing/sysfs-driver-ufs
@@ -244,7 +244,6 @@ Description: This file shows whether or not the UFS boot feature is enabled.
This is one of the UFS configuration descriptor parameters.
More information about the descriptor can be found in the UFS
2.1 specification.
- The file is read only.

What: /sys/bus/platform/drivers/ufshcd/*/config_descriptor/cfg_descriptor_access_enable
Date: May 2018
@@ -254,7 +253,6 @@ Description: This file shows whether or not access will be permitted to the
boot sequence. This is one of the UFS configuration descriptor
parameters. More information about the descriptor can be found
in the UFS 2.1 specification.
- The file is read only.

What: /sys/bus/platform/drivers/ufshcd/*/config_descriptor/cfg_high_priority_lun
Date: May 2018
@@ -263,7 +261,6 @@ Description: This file shows the identifier of the high priority logical
unit. This is one of the UFS configuration descriptor
parameters. More information about the descriptor can be found
in the UFS 2.1 specification.
- The file is read only.

What: /sys/bus/platform/drivers/ufshcd/*/config_descriptor/cfg_init_active_icc_level
Date: May 2018
@@ -272,7 +269,6 @@ Description: This file shows the ICC level in active mode after device
initialization or hardware reset. This is one of the UFS
configuration descriptor parameters. More information about the
descriptor can be found in the UFS 2.1 specification.
- The file is read only.

What: /sys/bus/platform/drivers/ufshcd/*/config_descriptor/cfg_initial_power_mode
Date: May 2018
@@ -281,7 +277,6 @@ Description: This file shows the power mode after device initialization or
hardware reset. This is one of the UFS configuration descriptor
parameters. More information about the descriptor can be found
in the UFS 2.1 specification.
- The file is read only.

What: /sys/bus/platform/drivers/ufshcd/*/config_descriptor/cfg_number_of_luns
Date: May 2018
@@ -290,7 +285,6 @@ Description: This file shows the number of logical units that the device will
support. This is one of the UFS configuration descriptor
parameters. More information about the descriptor can be found
in the UFS 2.1 specification.
- The file is read only.

What: /sys/bus/platform/drivers/ufshcd/*/config_descriptor/cfg_periodic_rtc_update
Date: May 2018
@@ -299,7 +293,6 @@ Description: This file shows the frequency and method of real time clock
updates. This is one of the UFS configuration descriptor
parameters. More information about the descriptor can be found
in the UFS 2.1 specification.
- The file is read only.

What: /sys/bus/platform/drivers/ufshcd/*/config_descriptor/cfg_secure_removal_type
Date: May 2018
@@ -308,7 +301,6 @@ Description: This file shows the secure removal type of the UFS device. This
is one of the UFS configuration descriptor parameters. More
information about the descriptor can be found in the UFS 2.1
specification.
- The file is read only.

What: /sys/bus/platform/drivers/ufshcd/*/config_descriptor/cfg_unit
Date: May 2018
@@ -327,7 +319,6 @@ Description: This file shows the number of allocation units assigned to the
being displayed. This is one of the UFS configuration unit
descriptor parameters. More information about the descriptor
can be found in the UFS 2.1 specification.
- The file is read only.

What: /sys/bus/platform/drivers/ufshcd/*/config_descriptor/unit_boot_lun_id
Date: May 2018
@@ -338,7 +329,6 @@ Description: This file shows the boot LUN ID for this logical unit,
This is one of the UFS configuration unit descriptor parameters.
More information about the descriptor can be found in the UFS
2.1 specification.
- The file is read only.

What: /sys/bus/platform/drivers/ufshcd/*/config_descriptor/unit_context_capabilities
Date: May 2018
@@ -348,7 +338,6 @@ Description: This file shows the context capabilities for the logical unit.
being displayed. This is one of the UFS configuration unit
descriptor parameters. More information about the descriptor
can be found in the UFS 2.1 specification.
- The file is read only.

What: /sys/bus/platform/drivers/ufshcd/*/config_descriptor/unit_data_reliability
Date: May 2018
@@ -358,7 +347,6 @@ Description: This file shows the data reliability for the logical unit.
being displayed. This is one of the UFS configuration unit
descriptor parameters. More information about the descriptor
can be found in the UFS 2.1 specification.
- The file is read only.

What: /sys/bus/platform/drivers/ufshcd/*/config_descriptor/unit_logical_block_size
Date: May 2018
@@ -368,7 +356,6 @@ Description: This file shows the logical block size for the logical unit as
being displayed. This is one of the UFS configuration unit
descriptor parameters. More information about the descriptor
can be found in the UFS 2.1 specification.
- The file is read only.

What: /sys/bus/platform/drivers/ufshcd/*/config_descriptor/unit_lu_enable
Date: May 2018
@@ -378,7 +365,6 @@ Description: This file shows whether or not the logical unit is enabled.
being displayed. This is one of the UFS configuration unit
descriptor parameters. More information about the descriptor
can be found in the UFS 2.1 specification.
- The file is read only.

What: /sys/bus/platform/drivers/ufshcd/*/config_descriptor/unit_lu_write_protect
Date: May 2018
@@ -388,7 +374,6 @@ Description: This file shows the write protect status for the logical unit.
being displayed. This is one of the UFS configuration unit
descriptor parameters. More information about the descriptor
can be found in the UFS 2.1 specification.
- The file is read only.

What: /sys/bus/platform/drivers/ufshcd/*/config_descriptor/unit_memory_type
Date: May 2018
@@ -398,7 +383,6 @@ Description: This file shows the memory type for the logical unit.
being displayed. This is one of the UFS configuration unit
descriptor parameters. More information about the descriptor
can be found in the UFS 2.1 specification.
- The file is read only.

What: /sys/bus/platform/drivers/ufshcd/*/config_descriptor/unit_provisioning_type
Date: May 2018
@@ -408,7 +392,6 @@ Description: This file shows the provisioning type information for the
being displayed. This is one of the UFS configuration unit
descriptor parameters. More information about the descriptor
can be found in the UFS 2.1 specification.
- The file is read only.


What: /sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/unipro_version
--
2.13.5
\
 
 \ /
  Last update: 2018-05-29 20:20    [W:0.141 / U:5.052 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site