lkml.org 
[lkml]   [2018]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Documentation: fpga: cleanup
Date
Minor fixes including:

* fix some typos
* correct use of a/an
* rephrase explanation of .state ops function
* s/re-use/reuse/ (use only one spelling of 'reuse' in these docs)
* s/cpu/CPU/

Signed-off-by: Alan Tull <atull@kernel.org>
---
Documentation/driver-api/fpga/fpga-mgr.rst | 12 ++++++------
Documentation/driver-api/fpga/fpga-region.rst | 12 ++++++------
Documentation/driver-api/fpga/intro.rst | 14 +++++++-------
3 files changed, 19 insertions(+), 19 deletions(-)

diff --git a/Documentation/driver-api/fpga/fpga-mgr.rst b/Documentation/driver-api/fpga/fpga-mgr.rst
index bcf2dd2..4b3825d 100644
--- a/Documentation/driver-api/fpga/fpga-mgr.rst
+++ b/Documentation/driver-api/fpga/fpga-mgr.rst
@@ -83,7 +83,7 @@ The programming sequence is::
3. .write_complete

The .write_init function will prepare the FPGA to receive the image data. The
-buffer passed into .write_init will be atmost .initial_header_size bytes long,
+buffer passed into .write_init will be at most .initial_header_size bytes long;
if the whole bitstream is not immediately available then the core code will
buffer up at least this much before starting.

@@ -98,9 +98,9 @@ scatter list. This interface is suitable for drivers which use DMA.
The .write_complete function is called after all the image has been written
to put the FPGA into operating mode.

-The ops include a .state function which will read the hardware FPGA manager and
-return a code of type enum fpga_mgr_states. It doesn't result in a change in
-hardware state.
+The ops include a .state function which will determine the state the FPGA is in
+and return a code of type enum fpga_mgr_states. It doesn't result in a change
+in state.

How to write an image buffer to a supported FPGA
------------------------------------------------
@@ -181,8 +181,8 @@ API for implementing a new FPGA Manager driver
.. kernel-doc:: drivers/fpga/fpga-mgr.c
:functions: fpga_mgr_unregister

-API for programming a FPGA
---------------------------
+API for programming an FPGA
+---------------------------

.. kernel-doc:: include/linux/fpga/fpga-mgr.h
:functions: fpga_image_info
diff --git a/Documentation/driver-api/fpga/fpga-region.rst b/Documentation/driver-api/fpga/fpga-region.rst
index f89e4a3..f30333c 100644
--- a/Documentation/driver-api/fpga/fpga-region.rst
+++ b/Documentation/driver-api/fpga/fpga-region.rst
@@ -4,7 +4,7 @@ FPGA Region
Overview
--------

-This document is meant to be an brief overview of the FPGA region API usage. A
+This document is meant to be a brief overview of the FPGA region API usage. A
more conceptual look at regions can be found in the Device Tree binding
document [#f1]_.

@@ -31,11 +31,11 @@ fpga_image_info including:
* pointers to the image as either a scatter-gather buffer, a contiguous
buffer, or the name of firmware file

- * flags indicating specifics such as whether the image if for partial
+ * flags indicating specifics such as whether the image is for partial
reconfiguration.

-How to program a FPGA using a region
-------------------------------------
+How to program an FPGA using a region
+-------------------------------------

First, allocate the info struct::

@@ -77,8 +77,8 @@ An example of usage can be seen in the probe function of [#f2]_.
.. [#f1] ../devicetree/bindings/fpga/fpga-region.txt
.. [#f2] ../../drivers/fpga/of-fpga-region.c

-API to program a FGPA
----------------------
+API to program an FPGA
+----------------------

.. kernel-doc:: drivers/fpga/fpga-region.c
:functions: fpga_region_program_fpga
diff --git a/Documentation/driver-api/fpga/intro.rst b/Documentation/driver-api/fpga/intro.rst
index 51cd81d..50d1cab 100644
--- a/Documentation/driver-api/fpga/intro.rst
+++ b/Documentation/driver-api/fpga/intro.rst
@@ -12,18 +12,18 @@ Linux. Some of the core intentions of the FPGA subsystems are:

* Code should not be shared between upper and lower layers. This
should go without saying. If that seems necessary, there's probably
- framework functionality that that can be added that will benefit
+ framework functionality that can be added that will benefit
other users. Write the linux-fpga mailing list and maintainers and
seek out a solution that expands the framework for broad reuse.

-* Generally, when adding code, think of the future. Plan for re-use.
+* Generally, when adding code, think of the future. Plan for reuse.

The framework in the kernel is divided into:

FPGA Manager
------------

-If you are adding a new FPGA or a new method of programming a FPGA,
+If you are adding a new FPGA or a new method of programming an FPGA,
this is the subsystem for you. Low level FPGA manager drivers contain
the knowledge of how to program a specific device. This subsystem
includes the framework in fpga-mgr.c and the low level drivers that
@@ -32,10 +32,10 @@ are registered with it.
FPGA Bridge
-----------

-FPGA Bridges prevent spurious signals from going out of a FPGA or a
-region of a FPGA during programming. They are disabled before
+FPGA Bridges prevent spurious signals from going out of an FPGA or a
+region of an FPGA during programming. They are disabled before
programming begins and re-enabled afterwards. An FPGA bridge may be
-actual hard hardware that gates a bus to a cpu or a soft ("freeze")
+actual hard hardware that gates a bus to a CPU or a soft ("freeze")
bridge in FPGA fabric that surrounds a partial reconfiguration region
of an FPGA. This subsystem includes fpga-bridge.c and the low level
drivers that are registered with it.
@@ -44,7 +44,7 @@ FPGA Region
-----------

If you are adding a new interface to the FPGA framework, add it on top
-of a FPGA region to allow the most reuse of your interface.
+of an FPGA region to allow the most reuse of your interface.

The FPGA Region framework (fpga-region.c) associates managers and
bridges as reconfigurable regions. A region may refer to the whole
--
2.7.4
\
 
 \ /
  Last update: 2018-05-29 19:57    [W:0.045 / U:1.400 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site