lkml.org 
[lkml]   [2018]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mtd: nand: raw: atmel: add module param to avoid using dma
On Tue, 29 May 2018 18:01:40 +0300
Eugen Hristev <eugen.hristev@microchip.com> wrote:

> [...]
>
>
> >
> > I think you're missing something here. We use the DMA engine in memcpy
> > mode (SRAM -> DRAM), not in device mode (dev -> DRAM or DRAM -> dev).
> > So there's no dmas prop defined in the DT and there should not be.
> >
> > Regards,
> >
> > Boris
> >
>
> Ok, so the memcpy SRAM <-> DRAM will hog the transfer between DRAM and
> LCD if my understanding is correct. That's the DMA that Peter wants to
> disable with his patch ?
>
> Then we can then try to force NFC SRAM DMA channels to use just DDR port
> 1 or 2 for memcpy ?

You mean the dmaengine? According to "14.1.3 Master to Slave Access"
that's already the case.

Only DMAC0 can access the NFC SRAM and it's done through DMAC0:IF0,
then access to DDR is going through port DDR port 1 (DMAC0:IF1) or 2
(DMAC0:IF0).

>
> I have also received a suggestion to try to increase the porches in
> LCDC_LCDCFG3 .

Yep, Nicolas suggested something similar. Peter, can you try that?

\
 
 \ /
  Last update: 2018-05-29 17:17    [W:0.079 / U:5.496 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site