lkml.org 
[lkml]   [2018]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 3/5] Documentation: DT: add i.MX EPIT timer binding
On Tue, May 29, 2018 at 12:04 PM, Clément Péron <peron.clem@gmail.com> wrote:
> From: Clément Peron <clement.peron@devialet.com>
>
> Add devicetree binding document for NXP's i.MX SoC specific
> EPIT timer driver.
>
> Signed-off-by: Clément Peron <clement.peron@devialet.com>
> ---
> .../devicetree/bindings/clock/imx6q,epit.txt | 25 +++++++++++++++++++
> 1 file changed, 25 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/imx6q,epit.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/imx6q,epit.txt b/Documentation/devicetree/bindings/clock/imx6q,epit.txt
> new file mode 100644
> index 000000000000..d54d455cebdc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/imx6q,epit.txt
> @@ -0,0 +1,25 @@
> +Binding for the i.MX6 EPIT timer
> +
> +This binding uses the common clock binding[1].
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +Required properties:
> +- compatible: should be "fsl,imx6q-epit"
> +- reg: physical base address of the controller and length of memory mapped
> + region.
> +- interrupts: Should contain EPIT controller interrupt
> +- clocks: list of clock specifiers, must contain an entry for each required
> + entry in clock-names
> +- clock-names : as described in the clock bindings

Please list the name of each required clock here.

I see that the driver does not request a "ckil" clock.

\
 
 \ /
  Last update: 2018-05-29 17:16    [W:0.120 / U:0.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site