lkml.org 
[lkml]   [2018]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[patch v25 3/4] Documentation: jtag: Add bindings for Aspeed SoC 24xx and 25xx families JTAG master driver
Date
It has been tested on Mellanox system with BMC equipped with
Aspeed 2520 SoC for programming CPLD devices.

Signed-off-by: Oleksandr Shamray <oleksandrs@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Rob Herring <robh@kernel.org>
---
v21->v22
v20->v21
v19->v20
v18->v19

v17->v18
v16->v17
v15->v16
Comments pointed by Joel Stanley <joel.stan@gmail.com>
- change clocks = <&clk_apb> to proper clocks = <&syscon ASPEED_CLK_APB>
- add reset descriptions in bndings file

v14->v15
v13->v14
v12->v13
v11->v12
v10->v11
v9->v10
v8->v9
v7->v8
Comments pointed by pointed by Joel Stanley <joel.stan@gmail.com>
- Change compatible string to ast2400 and ast2000

V6->v7
Comments pointed by Tobias Klauser <tklauser@distanz.ch>
- Fix spell "Doccumentation" -> "Documentation"

v5->v6
Comments pointed by Tobias Klauser <tklauser@distanz.ch>
- Small nit: s/documentation/Documentation/

v4->v5

V3->v4
Comments pointed by Rob Herring <robh@kernel.org>
- delete unnecessary "status" and "reg-shift" descriptions in
bndings file

v2->v3
Comments pointed by Rob Herring <robh@kernel.org>
- split Aspeed jtag driver and binding to sepatrate patches
- delete unnecessary "status" and "reg-shift" descriptions in
bndings file
---
.../devicetree/bindings/jtag/aspeed-jtag.txt | 22 ++++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 23 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/jtag/aspeed-jtag.txt

diff --git a/Documentation/devicetree/bindings/jtag/aspeed-jtag.txt b/Documentation/devicetree/bindings/jtag/aspeed-jtag.txt
new file mode 100644
index 0000000..7c36eb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/jtag/aspeed-jtag.txt
@@ -0,0 +1,22 @@
+Aspeed JTAG driver for ast2400 and ast2500 SoC
+
+Required properties:
+- compatible: Should be one of
+ - "aspeed,ast2400-jtag"
+ - "aspeed,ast2500-jtag"
+- reg contains the offset and length of the JTAG memory
+ region
+- clocks root clock of bus, should reference the APB
+ clock in the second cell
+- resets phandle to reset controller with the reset number in
+ the second cell
+- interrupts should contain JTAG controller interrupt
+
+Example:
+jtag: jtag@1e6e4000 {
+ compatible = "aspeed,ast2500-jtag";
+ reg = <0x1e6e4000 0x1c>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_JTAG_MASTER>;
+ interrupts = <43>;
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index e7b8b2c..a5e5f75 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7617,6 +7617,7 @@ S: Maintained
F: include/linux/jtag.h
F: include/uapi/linux/jtag.h
F: drivers/jtag/
+F: Documentation/devicetree/bindings/jtag/

K10TEMP HARDWARE MONITORING DRIVER
M: Clemens Ladisch <clemens@ladisch.de>
--
1.7.1
\
 
 \ /
  Last update: 2018-05-29 16:55    [W:1.226 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site