lkml.org 
[lkml]   [2018]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 18/19] serdev: ttydev: Serdev driver that creates an standard TTY port
Date
Standard TTY port that can be loaded/unloaded via serdev sysfs. This
serdev driver can only be used by serdev controllers that are compatible
with ttyport.

Cc: Rob Herring <robh@kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
---
drivers/tty/serdev/Kconfig | 11 +++++
drivers/tty/serdev/Makefile | 2 +
drivers/tty/serdev/serdev-ttydev.c | 70 ++++++++++++++++++++++++++++++
3 files changed, 83 insertions(+)
create mode 100644 drivers/tty/serdev/serdev-ttydev.c

diff --git a/drivers/tty/serdev/Kconfig b/drivers/tty/serdev/Kconfig
index 1dbc8352e027..d19bf689a424 100644
--- a/drivers/tty/serdev/Kconfig
+++ b/drivers/tty/serdev/Kconfig
@@ -21,4 +21,15 @@ config SERIAL_DEV_CTRL_TTYPORT
depends on SERIAL_DEV_BUS != m
default y

+config SERIAL_DEV_CTRL_TTYDEV
+ tristate "TTY port dynamically loaded by the Serial Device Bus"
+ help
+ Say Y here if you want to create a bridge driver between the Serial
+ device bus and the TTY chardevice. This driver can be dynamically
+ loaded/unloaded by the Serial Device Bus.
+
+ If unsure, say Y.
+ depends on SERIAL_DEV_CTRL_TTYPORT
+ default m
+
endif
diff --git a/drivers/tty/serdev/Makefile b/drivers/tty/serdev/Makefile
index 0cbdb9444d9d..5c807b77d12d 100644
--- a/drivers/tty/serdev/Makefile
+++ b/drivers/tty/serdev/Makefile
@@ -3,3 +3,5 @@ serdev-objs := core.o
obj-$(CONFIG_SERIAL_DEV_BUS) += serdev.o

obj-$(CONFIG_SERIAL_DEV_CTRL_TTYPORT) += serdev-ttyport.o
+
+obj-$(CONFIG_SERIAL_DEV_CTRL_TTYDEV) += serdev-ttydev.o
diff --git a/drivers/tty/serdev/serdev-ttydev.c b/drivers/tty/serdev/serdev-ttydev.c
new file mode 100644
index 000000000000..66479d6534dd
--- /dev/null
+++ b/drivers/tty/serdev/serdev-ttydev.c
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Ricardo Ribalda <ricardo.ribalda@gmail.com>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/serdev.h>
+#include <linux/tty.h>
+#include "serport.h"
+
+static int ttydev_serdev_probe(struct serdev_device *serdev)
+{
+ struct serdev_controller *ctrl = serdev->ctrl;
+ struct serport *serport;
+ struct device *dev;
+
+ if (!ctrl->is_ttyport)
+ return -ENODEV;
+
+ serport = serdev_controller_get_drvdata(ctrl);
+
+ dev = tty_register_device_attr(serport->tty_drv, serport->tty_idx,
+ &serdev->dev, NULL, NULL);
+
+ return dev ? 0 : PTR_ERR(dev);
+}
+
+static void ttydev_serdev_remove(struct serdev_device *serdev)
+{
+ struct serdev_controller *ctrl = serdev->ctrl;
+ struct serport *serport;
+
+ serport = serdev_controller_get_drvdata(ctrl);
+ tty_unregister_device(serport->tty_drv, serport->tty_idx);
+}
+
+static const struct serdev_device_id ttydev_serdev_id[] = {
+ { "ttydev", },
+ { "ttydev_serdev", },
+ {}
+};
+MODULE_DEVICE_TABLE(serdev, ttydev_serdev_id);
+
+static struct serdev_device_driver ttydev_serdev_driver = {
+ .probe = ttydev_serdev_probe,
+ .remove = ttydev_serdev_remove,
+ .driver = {
+ .name = "ttydev_serdev",
+ },
+ .id_table = ttydev_serdev_id,
+};
+
+static int __init ttydev_serdev_init(void)
+{
+ return serdev_device_driver_register(&ttydev_serdev_driver);
+}
+module_init(ttydev_serdev_init);
+
+static void __exit ttydev_serdev_exit(void)
+{
+ return serdev_device_driver_unregister(&ttydev_serdev_driver);
+}
+module_exit(ttydev_serdev_exit);
+
+MODULE_AUTHOR("Ricardo Ribalda <ricardo.ribalda@gmail.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Serdev to ttydev module");
--
2.17.0
\
 
 \ /
  Last update: 2018-05-29 15:13    [W:0.170 / U:32.128 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site