lkml.org 
[lkml]   [2018]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/5] remoteproc: rename subdev probe and remove functions
From
Date
On 05/29/2018 04:12 AM, Arnaud Pouliquen wrote:
> Hello Alex
>
>
> We have the same needs (prepare unprepare steps) on our platform. We
> tested you core patches and they answers to our need.

I'm very glad to hear that. Would you offer your "Tested-by" on these?

On your comment below, yes, I will re-send v2 and will separate the
core from the glink code.

Thanks.

-Alex

> Just a remark below
>
> On 05/15/2018 10:53 PM, Alex Elder wrote:
>> Rename functions used when subdevices are started and stopped to
>> reflect the new naming scheme.
>>
>> Signed-off-by: Alex Elder <elder@linaro.org>
>> ---
>> drivers/remoteproc/qcom_common.c | 16 ++++++++--------
>> drivers/remoteproc/remoteproc_core.c | 8 ++++----
>> 2 files changed, 12 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/remoteproc/qcom_common.c b/drivers/remoteproc/qcom_common.c
>> index 4ae87c5b8793..6f77840140bf 100644
>> --- a/drivers/remoteproc/qcom_common.c
>> +++ b/drivers/remoteproc/qcom_common.c
>> @@ -33,7 +33,7 @@
>>
>> static BLOCKING_NOTIFIER_HEAD(ssr_notifiers);
>>
>> -static int glink_subdev_probe(struct rproc_subdev *subdev)
>> +static int glink_subdev_start(struct rproc_subdev *subdev)
>> {
>> struct qcom_rproc_glink *glink = to_glink_subdev(subdev);
>>
>> @@ -42,7 +42,7 @@ static int glink_subdev_probe(struct rproc_subdev *subdev)
>> return PTR_ERR_OR_ZERO(glink->edge);
>> }
>>
>> -static void glink_subdev_remove(struct rproc_subdev *subdev, bool crashed)
>> +static void glink_subdev_stop(struct rproc_subdev *subdev, bool crashed)
>> {
>> struct qcom_rproc_glink *glink = to_glink_subdev(subdev);
>>
>> @@ -64,8 +64,8 @@ void qcom_add_glink_subdev(struct rproc *rproc, struct qcom_rproc_glink *glink)
>> return;
>>
>> glink->dev = dev;
>> - glink->subdev.start = glink_subdev_probe;
>> - glink->subdev.stop = glink_subdev_remove;
>> + glink->subdev.start = glink_subdev_start;
>> + glink->subdev.stop = glink_subdev_stop;
>>
>> rproc_add_subdev(rproc, &glink->subdev);
>> }
>> @@ -129,7 +129,7 @@ int qcom_register_dump_segments(struct rproc *rproc,
>> }
>> EXPORT_SYMBOL_GPL(qcom_register_dump_segments);
>>
>> -static int smd_subdev_probe(struct rproc_subdev *subdev)
>> +static int smd_subdev_start(struct rproc_subdev *subdev)
>> {
>> struct qcom_rproc_subdev *smd = to_smd_subdev(subdev);
>>
>> @@ -138,7 +138,7 @@ static int smd_subdev_probe(struct rproc_subdev *subdev)
>> return PTR_ERR_OR_ZERO(smd->edge);
>> }
>>
>> -static void smd_subdev_remove(struct rproc_subdev *subdev, bool crashed)
>> +static void smd_subdev_stop(struct rproc_subdev *subdev, bool crashed)
>> {
>> struct qcom_rproc_subdev *smd = to_smd_subdev(subdev);
>>
>> @@ -160,8 +160,8 @@ void qcom_add_smd_subdev(struct rproc *rproc, struct qcom_rproc_subdev *smd)
>> return;
>>
>> smd->dev = dev;
>> - smd->subdev.start = smd_subdev_probe;
>> - smd->subdev.stop = smd_subdev_remove;
>> + smd->subdev.start = smd_subdev_start;
>> + smd->subdev.stop = smd_subdev_stop;
>>
>> rproc_add_subdev(rproc, &smd->subdev);
>> }
>> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
>> index ca39fad175f2..2ede7ae6f5bc 100644
>> --- a/drivers/remoteproc/remoteproc_core.c
>> +++ b/drivers/remoteproc/remoteproc_core.c
>> @@ -301,14 +301,14 @@ void rproc_free_vring(struct rproc_vring *rvring)
>> rsc->vring[idx].notifyid = -1;
>> }
>>
>> -static int rproc_vdev_do_probe(struct rproc_subdev *subdev)
>> +static int rproc_vdev_do_start(struct rproc_subdev *subdev)
>> {
>> struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev);
>>
>> return rproc_add_virtio_dev(rvdev, rvdev->id);
>> }
>>
>> -static void rproc_vdev_do_remove(struct rproc_subdev *subdev, bool crashed)
>> +static void rproc_vdev_do_stop(struct rproc_subdev *subdev, bool crashed)
>> {
>> struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev);
>>
>> @@ -399,8 +399,8 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
>>
>> list_add_tail(&rvdev->node, &rproc->rvdevs);
>>
>> - rvdev->subdev.start = rproc_vdev_do_probe;
>> - rvdev->subdev.stop = rproc_vdev_do_remove;
>> + rvdev->subdev.start = rproc_vdev_do_start;
>> + rvdev->subdev.stop = rproc_vdev_do_stop;
>>
>> rproc_add_subdev(rproc, &rvdev->subdev);
>
> Could you split in 2 patches one for the core another, the other for the
> glink driver?
>
> Regards
> Arnaud
>

\
 
 \ /
  Last update: 2018-05-29 13:56    [W:0.051 / U:1.524 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site