lkml.org 
[lkml]   [2018]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] remoteproc: qcom_q6v5: don't auto boot remote processor
On Tue, May 29, 2018 at 7:20 AM, Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
> On Thu 24 May 12:21 PDT 2018, Ramon Fried wrote:
>
>> Sometimes that rmtfs userspace module is not brought
>> up fast enough and the modem crashes.
>> disabling automated boot in the driver and triggering
>> the boot from user-space sovles the problem.
>>
>> Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
>
> Thanks for your patch Ramon. While this nudges the behavior to make
> things work slightly better I think we need to describe the explicit
> dependency between the mss firmware and the existence of rmtfs.
>
> As our remoteprocs are essentially always-on I would prefer that they
> start "automatically" and not through use of the sysfs interface.
>
> But we're at the point where this is a real problem on 410, 820 and 845,
> so we have to come up with some way to tie these pieces together. If
> your patch suits that solution I will happily take it.
Yes. it was tested on 410, and it did the trick.
>
> Regards,
> Bjorn
>
>> ---
>> drivers/remoteproc/qcom_q6v5_pil.c | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
>> index cbbafdcaaecb..719ee96445b3 100644
>> --- a/drivers/remoteproc/qcom_q6v5_pil.c
>> +++ b/drivers/remoteproc/qcom_q6v5_pil.c
>> @@ -1133,6 +1133,8 @@ static int q6v5_probe(struct platform_device *pdev)
>> return -ENOMEM;
>> }
>>
>> + rproc->auto_boot = false;
>> +
>> qproc = (struct q6v5 *)rproc->priv;
>> qproc->dev = &pdev->dev;
>> qproc->rproc = rproc;
>> --
>> 2.17.0
>>

\
 
 \ /
  Last update: 2018-05-29 13:32    [W:0.740 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site