lkml.org 
[lkml]   [2018]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v14 0/2] Kryo CPU scaling driver
On Fri, May 25, 2018 at 3:07 PM, Ilia Lin <ilialin@codeaurora.org> wrote:
> [v14]
> * Addressed comment from Sudeep about DT compatible
> * Added MAINTAINERS entry
>
> [v13]
> * Addressed comment from Sudeep about DT compatible check on init
>
> [v12]
> * Addressed comments from Sudeep and Viresh about the single init
>
> [v11]
> * Addressed comment from Russel about device_node reference
> * Addressed comment from Sudeep about the late_initcall
> * Transformed init into probe to take care of deferals
>
> [v10]
> * Split the series into domains
> * Addressed comments from Viresh and Sudeep about logical CPU numbering.
>
> The qcom-cpufreq-kryo driver is aimed to support different SOC versions.
> The driver reads eFuse information and chooses the required OPP subset
> by passing the OPP supported-hw parameter.
>
> The series depends on the series from Viresh:
> https://patchwork.kernel.org/patch/10418139/
>
> The previous spin was here:
> https://patchwork.kernel.org/patch/10424949/
>
> Ilia Lin (2):
> cpufreq: Add Kryo CPU scaling driver
> dt-bindings: cpufreq: Document operating-points-v2-kryo-cpu
>
> .../devicetree/bindings/opp/kryo-cpufreq.txt | 680 +++++++++++++++++++++
> MAINTAINERS | 7 +
> drivers/cpufreq/Kconfig.arm | 10 +
> drivers/cpufreq/Makefile | 1 +
> drivers/cpufreq/cpufreq-dt-platdev.c | 3 +
> drivers/cpufreq/qcom-cpufreq-kryo.c | 206 +++++++
> 6 files changed, 907 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/opp/kryo-cpufreq.txt
> create mode 100644 drivers/cpufreq/qcom-cpufreq-kryo.c
>
FWIW,

Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>

\
 
 \ /
  Last update: 2018-05-29 13:12    [W:1.337 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site