[lkml]   [2018]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH v6 3/3] dt-bindings: phy-qcom-qmp: Add UFS phy compatible string for sdm845
Update the compatible string for UFS QMP PHY on SDM845.

Signed-off-by: Can Guo <>
Reviewed-by: Rob Herring <>
Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index cef8765..930d94c 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -11,7 +11,8 @@ Required properties:
"qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
"qcom,qmp-v3-usb3-phy" for USB3 QMP V3 phy,
"qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
- "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845.
+ "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
+ "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845.

- reg: offset and length of register set for PHY's common serdes block.

@@ -29,6 +30,7 @@ Required properties:
"aux" for phy aux clock,
"ref" for 19.2 MHz ref clk,
"com_aux" for phy common block aux clock,
+ "ref_aux" for phy reference aux clock,
For "qcom,msm8996-qmp-pcie-phy" must contain:
"aux", "cfg_ahb", "ref".
For "qcom,msm8996-qmp-usb3-phy" must contain:
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
 \ /
  Last update: 2018-05-29 06:40    [W:0.090 / U:4.752 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site