lkml.org 
[lkml]   [2018]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: scsi/qla2xxx: BUG_ON(blk_queued_rq(req) is triggered in blk_finish_request
From
Date
Hi Himanshu

Thanks for your kindly response.

On 05/30/2018 01:44 AM, Madhani, Himanshu wrote:
> Thanks for the information. I was out for couple days. Still working through my emails.
>
> Without core dump shared with us, things become hard to debug. We'll take a look at this data.
>
> Also, if you have any reproducer test case, Can you share that with us so that we can try to trigger It internally and see if we have better luck debugging that.

This issue occurred in customer's environment twice till now, there is no reproduce steps.

If you have time, would you please look at our analysis to see whether it is reasonable ?
The kernel is not newest, but there should be the same issue in mainline with scsi + block legacy
The key point here is:
when the aborted command returns in irq context, it will invoke scsi_done, then blk_complete_request.
however, the scsi recovery context could clear the ATOM_COMPLETE and requeue the request before irq
context get it.

Thanks
Jianchao

>
> On 5/28/18, 6:11 PM, "jianchao.wang" <jianchao.w.wang@oracle.com> wrote:
>
> Hi Himanshu
>
> do you need any other information ?
>
> Thanks
> Jianchao
>
> On 05/25/2018 02:48 PM, jianchao.wang wrote:
> > Hi Himanshu
> >
> > I'm afraid I cannot provide you the vmcore file, it is from our customer.
> > If any information needed in the vmcore, I could provide with you.
> >
> > In this scene, there are two contexts:
> > 1. the irq context, scsi_done() from qla2x00_sp_compl()
> > 2. the kworker context, scmd_eh_abort_handler which invokes the
> > qla2xxx_eh_abort()
> >
> > Let's see the irq context.
> > scsi_done() will invoke the blk_complete_request().
> > In common case, the REQ_ATOM_COMPLETE should have been set by
> > blk_rq_check_expired() when the request was confirmed timeout. So
> > __blk_complete_request() will not be invoked.
> >
> > On the other hand, in the kworker context, scmd_eh_abort_handler() will do some
> > other things on this aborted request.
> >
> > rtn = scsi_try_to_abort_cmd(sdev->host->hostt, scmd);
> > if (rtn == SUCCESS) {
> > set_host_byte(scmd, DID_TIME_OUT)
> > if (scsi_host_eh_past_deadline(sdev->host)) {
> > >>>>
> > } else if (!scsi_noretry_cmd(scmd) &&
> > (++scmd->retries <= scmd->allowed)) {
> > scsi_queue_insert(scmd, SCSI_MLQUEUE_EH_RETRY)
> > }>>>>
> >>>>>
> > }
> > The host type of the result will set to DID_TIME_OUT. scsi_noretry_cmd() will
> > return false and scsi_queue_insert() will be invoked, finally the
> > blk_requeue_request().
> >
> > blk_requeue_request() will clear the REQ_ATOM_COMPLETE and queue the request on
> > request_queue->queue_head.
> >
> > There could be a race between these two contexts:
> > what if the blk_clear_rq_complete() in kworker context is invoked before the
> > blk_mark_rq_complete() in irq context ?
> >
> > BLK_SOFTIRQ will be raised by __blk_complete_request() in irq context. Then the
> > scsi_softirq_done() will be invoked. At the moment, the request has been
> > requeued by kworker context and scsi_cmnd->result is set 0. On the cpu of the
> > irq context, the blk_finish_request() will be invoked finally, and panic comes
> > up due to BUG_ON(blk_queued_rq(req)
> >
> > Here is the dmesg log.
> > [4937745.180213] qla2xxx [0000:92:00.1]-801c:4: Abort command issued nexus=4:5:5 -- 1 2002.
> > [4937745.180655] qla2xxx [0000:92:00.1]-801c:4: Abort command issued nexus=4:4:73 -- 0 2002.
> > [4937745.181059] qla2xxx [0000:92:00.1]-801c:4: Abort command issued nexus=4:5:5 -- 1 2002.
> > [4937745.181514] qla2xxx [0000:92:00.1]-801c:4: Abort command issued nexus=4:4:73 -- 0 2002.
> > [4937745.181636] ------------[ cut here ]------------
> > [4937745.181900] kernel BUG at block/blk-core.c:2601!
> > [4937745.182095] qla2xxx [0000:92:00.1]-801c:4: Abort command issued nexus=4:5:5 -- 1 2002.
> > [4937745.182338] qla2xxx [0000:92:00.1]-801c:4: Abort command issued nexus=4:4:73 -- 1 2002.
> > [4937745.183046] qla2xxx [0000:92:00.1]-801c:4: Abort command issued nexus=4:5:5 -- 1 2002.
> > [4937745.183213] qla2xxx [0000:92:00.1]-801c:4: Abort command issued nexus=4:4:73 -- 1 2002.
> > [4937745.183844] qla2xxx [0000:92:00.1]-801c:4: Abort command issued nexus=4:5:5 -- 1 2002.
> > [4937745.184038] qla2xxx [0000:92:00.1]-801c:4: Abort command issued nexus=4:4:73 -- 1 2002.
> > [4937745.184919] invalid opcode: 0000 [#1] SMP
> > [4937745.185173] Modules linked in: ...
> > [4937745.188237] CPU: 18 PID: 0 Comm: swapper/18 Not tainted 4.1.12-61.1.9.el6uek.x86_64 #2
> > [4937745.188691] Hardware name: Oracle Corporation SUN BLADE X4-2B /BD,ASSY,PCB,X4-2B , BIOS 28010200 01/16/2014
> > [4937745.189157] task: ffff880227fa9c00 ti: ffff880227fc0000 task.ti: ffff880227fc0000
> > [4937745.189607] RIP: e030:[<ffffffff812ed130>] [<ffffffff812ed130>] blk_finish_request+0xd0/0xe0
> > [4937745.190104] RSP: e02b:ffff88022d483d78 EFLAGS: 00010083
> > [4937745.190339] RAX: 0000000000000280 RBX: ffff8801c4508730 RCX: 0000000000000280
> > [4937745.190791] RDX: 0000000000008b5a RSI: 0000000000000000 RDI: ffff8801c4508730
> > [4937745.191246] RBP: ffff88022d483d88 R08: 0000000000000000 R09: 0000000000004000
> > [4937745.191694] R10: 000000000000000b R11: 0000000000007ffe R12: 0000000000000000
> > [4937745.192153] R13: ffff88022374d000 R14: ffff880184cb88c0 R15: ffff8800536ccc90
> > [4937745.197930] FS: 0000000000000000(0000) GS:ffff88022d480000(0000) knlGS:ffff88022d480000
> > [4937745.198389] CS: e033 DS: 002b ES: 002b CR0: 0000000080050033
> > [4937745.198627] CR2: 00000000016e1f18 CR3: 000000010caed000 CR4: 0000000000042660
> > [4937745.199080] Stack:
> > [4937745.199309] ffff8801c4508730 0000000000000000 ffff88022d483dd8 ffffffff814ac82f
> > [4937745.199790] ffff88022d483da8 0000000000000280 ffff88022d483dd8 ffff880184cb88c0
> > [4937745.200290] ffff8801c4508730 0000000000000000 0000000000000000 0000000000000000
> > [4937745.200745] Call Trace:
> > [4937745.200968] <IRQ>
> > [4937745.200986] [<ffffffff814ac82f>] scsi_end_request+0x11f/0x1e0
> > [4937745.201422] [<ffffffff814accfc>] scsi_io_completion+0xac/0x500
> > [4937745.201651] [<ffffffff814a3bb0>] scsi_finish_command+0xf0/0x150
> > [4937745.201875] [<ffffffff814ad2ba>] scsi_softirq_done+0x14a/0x160
> > [4937745.202103] [<ffffffff812f3c66>] blk_done_softirq+0x86/0xa0
> > [4937745.202333] [<ffffffff8108879a>] __do_softirq+0x10a/0x350
> > [4937745.202558] [<ffffffff81088b55>] irq_exit+0x125/0x130
> > [4937745.202787] [<ffffffff813e5a89>] xen_evtchn_do_upcall+0x39/0x50
> > [4937745.203020] [<ffffffff816cce5e>] xen_do_hypervisor_callback+0x1e/0x40
> > [4937745.203247] <EOI>
> > [4937745.203263] [<ffffffff810013aa>] ? xen_hypercall_sched_op+0xa/0x20
> > [4937745.203703] [<ffffffff810013aa>] ? xen_hypercall_sched_op+0xa/0x20
> > [4937745.203930] [<ffffffff8100baf0>] ? xen_safe_halt+0x10/0x20
> > [4937745.204160] [<ffffffff81022abe>] ? default_idle+0x1e/0x100
> > [4937745.204387] [<ffffffff8102210f>] ? arch_cpu_idle+0xf/0x20
> > [4937745.204614] [<ffffffff810c8f25>] ? cpuidle_idle_call+0x135/0x1e0
> > [4937745.204841] [<ffffffff810c91c5>] ? cpu_idle_loop+0x1f5/0x220
> > [4937745.205070] [<ffffffff810c920b>] ? cpu_startup_entry+0x1b/0x70
> > [4937745.205294] [<ffffffff810c924f>] ? cpu_startup_entry+0x5f/0x70
> > [4937745.205524] [<ffffffff81013a5a>] ? cpu_bringup_and_idle+0x2a/0x40
> > [4937745.205749] Code: 89 de e8 a4 14 00 00 e9 6b ff ff ff 83 7b 48 01 0f 85
> > 78 ff ff ff 48 8b 7b 30 48 81 c7 98 01 00 00 e8 75 6b ea ff e9 63 ff ff ff
> > <0f> 0b eb fe 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48
> > [4937745.206811] RIP [<ffffffff812ed130>] blk_finish_request+0xd0/0xe0
> > [4937745.207046] RSP <ffff88022d483d78>
> > [4937745.207687] ---[ end trace 0b43a57bdab9464f ]---
> > [4937745.207693] ------------[ cut here ]------------
> >
> > On 05/25/2018 02:30 PM, Madhani, Himanshu wrote:
> >> Hi Jianchao,
> >>
> >> Do you have any debug logs collected for us to look at this in details.
> >>
> >> Can you provide me crash/vmlinux/modules for details analysis.
> >>
> >> Thanks,
> >> himanshu
> >>
> >> On 5/24/18, 6:49 AM, "Madhani, Himanshu" <Himanshu.Madhani@cavium.com> wrote:
> >>
> >>
> >> > On May 24, 2018, at 2:09 AM, jianchao.wang <jianchao.w.wang@oracle.com> wrote:
> >> >
> >> > Hi Himanshu
> >> >
> >> > Thanks god get response from your side finally :)
> >> > I get qla2xxx-upstream@qlogic.com from the maintainer information of driver/scsi/qla2xxx
> >> > Looks like it should be modified.
> >> >
> >> Sorry for delay. I do try to respond quickly to any emails received on that ID as well.
> >>
> >> We’ll keep it for now and I’ll look into updating it, if needed.
> >>
> >> > Thanks
> >> > Jianchao
> >> >
> >> > On 05/24/2018 12:21 PM, Madhani, Himanshu wrote:
> >> >> Hi,
> >> >>
> >> >> Yes. We'll look at this issue.
> >> >>
> >> >> Thanks,
> >> >> Himanshu
> >> >>
> >> >>> -----Original Message-----
> >> >>> From: jianchao.wang [mailto:jianchao.w.wang@oracle.com]
> >> >>> Sent: Wednesday, May 23, 2018 6:51 PM
> >> >>> To: Dept-Eng QLA2xxx Upstream <qla2xxx-upstream@cavium.com>; Madhani,
> >> >>> Himanshu <Himanshu.Madhani@cavium.com>; jthumshirn@suse.de
> >> >>> Cc: linux-scsi@vger.kernel.org; linux-kernel@vger.kernel.org;
> >> >>> jejb@linux.vnet.ibm.com; Martin K. Petersen <martin.petersen@oracle.com>;
> >> >>> Junxiao Bi <junxiao.bi@oracle.com>
> >> >>> Subject: Re: BUG: scsi/qla2xxx: BUG_ON(blk_queued_rq(req) is triggered in
> >> >>> blk_finish_request
> >> >>>
> >> >>> Would anyone please take a look at this ?
> >> >>>
> >> >>> Thanks in advance
> >> >>> Jianchao
> >> >>>
> >> >>> On 05/23/2018 11:55 AM, jianchao.wang wrote:
> >> >>>>
> >> >>>>
> >> >>>> Hi all
> >> >>>>
> >> >>>> Our customer met a panic triggered by BUG_ON in blk_finish_request.
> >> >>>>> From the dmesg log, the BUG_ON was triggered after command abort
> >> >>> occurred many times.
> >> >>>> There is a race condition in the following scenario.
> >> >>>>
> >> >>>> cpu A cpu B
> >> >>>> kworker interrupt
> >> >>>>
> >> >>>> scmd_eh_abort_handler()
> >> >>>> -> scsi_try_to_abort_cmd()
> >> >>>> -> qla2xxx_eh_abort()
> >> >>>> -> qla2x00_eh_wait_on_command() qla2x00_status_entry()
> >> >>>> -> qla2x00_sp_compl()
> >> >>>> -> qla2x00_sp_free_dma()
> >> >>>> -> scsi_queue_insert()
> >> >>>> -> __scsi_queue_insert()
> >> >>>> -> blk_requeue_request()
> >> >>>> -> blk_clear_rq_complete()
> >> >>>> -> scsi_done
> >> >>>> -> blk_complete_request
> >> >>>> -> blk_mark_rq_complete
> >> >>>> -> elv_requeue_request() -> __blk_complete_request()
> >> >>>> -> __elv_add_request()
> >> >>>> // req will be queued here
> >> >>>> BLK_SOFTIRQ
> >> >>>> scsi_softirq_done()
> >> >>>> -> scsi_finish_command()
> >> >>>> -> scsi_io_completion()
> >> >>>> -> scsi_end_request()
> >> >>>> -> blk_finish_request() //
> >> >>> BUG_ON(blk_queued_rq(req)) !!!
> >> >>>>
> >> >>>> The issue will not be triggered most of time, because the request is marked as
> >> >>> complete by timeout path.
> >> >>>> So the scsi_done from qla2x00_sp_compl does nothing.
> >> >>>> But as the scenario above, if the complete state has been cleaned by
> >> >>> blk_requeue_request, we will get
> >> >>>> the request both requeued and completed, and then
> >> >>> BUG_ON(blk_queued_rq(req)) in blk_finish_request comes up.
> >> >>>>
> >> >>>> Is there any solution for this in qla2xxx driver side ?
> >> >>>>
> >> >>>> Thanks
> >> >>>> Jianchao
> >> >>>>
> >> >>>>
> >>
> >> Thanks,
> >> - Himanshu
> >>
> >>
> >>
> >
>
>

\
 
 \ /
  Last update: 2018-05-30 05:29    [W:0.065 / U:1.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site