lkml.org 
[lkml]   [2018]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 18/27] xen: Adapt assembly for PIE support
Date
Change the assembly code to use the new _ASM_MOVABS macro which get a
symbol reference while being PIE compatible. Adapt the relocation tool
to ignore 32-bit Xen code.

Position Independent Executable (PIE) support will allow to extend the
KASLR randomization range 0xffffffff80000000.

Signed-off-by: Thomas Garnier <thgarnie@google.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
---
arch/x86/tools/relocs.c | 16 +++++++++++++++-
arch/x86/xen/xen-head.S | 11 ++++++-----
arch/x86/xen/xen-pvh.S | 13 +++++++++----
3 files changed, 30 insertions(+), 10 deletions(-)

diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c
index a35cc337f883..29283ad3950f 100644
--- a/arch/x86/tools/relocs.c
+++ b/arch/x86/tools/relocs.c
@@ -832,6 +832,16 @@ static int is_percpu_sym(ElfW(Sym) *sym, const char *symname)
strncmp(symname, "init_per_cpu_", 13);
}

+/*
+ * Check if the 32-bit relocation is within the xenpvh 32-bit code.
+ * If so, ignores it.
+ */
+static int is_in_xenpvh_assembly(ElfW(Addr) offset)
+{
+ ElfW(Sym) *sym = sym_lookup("pvh_start_xen");
+ return sym && (offset >= sym->st_value) &&
+ (offset < (sym->st_value + sym->st_size));
+}

static int do_reloc64(struct section *sec, Elf_Rel *rel, ElfW(Sym) *sym,
const char *symname)
@@ -895,8 +905,12 @@ static int do_reloc64(struct section *sec, Elf_Rel *rel, ElfW(Sym) *sym,
* the relocations are processed.
* Make sure that the offset will fit.
*/
- if (r_type != R_X86_64_64 && (int32_t)offset != (int64_t)offset)
+ if (r_type != R_X86_64_64 &&
+ (int32_t)offset != (int64_t)offset) {
+ if (is_in_xenpvh_assembly(offset))
+ break;
die("Relocation offset doesn't fit in 32 bits\n");
+ }

if (r_type == R_X86_64_64)
add_reloc(&relocs64, offset);
diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S
index 5077ead5e59c..4418ff0a1d96 100644
--- a/arch/x86/xen/xen-head.S
+++ b/arch/x86/xen/xen-head.S
@@ -28,14 +28,15 @@ ENTRY(startup_xen)

/* Clear .bss */
xor %eax,%eax
- mov $__bss_start, %_ASM_DI
- mov $__bss_stop, %_ASM_CX
+ _ASM_MOVABS $__bss_start, %_ASM_DI
+ _ASM_MOVABS $__bss_stop, %_ASM_CX
sub %_ASM_DI, %_ASM_CX
shr $__ASM_SEL(2, 3), %_ASM_CX
rep __ASM_SIZE(stos)

- mov %_ASM_SI, xen_start_info
- mov $init_thread_union+THREAD_SIZE, %_ASM_SP
+ _ASM_MOVABS $xen_start_info, %_ASM_AX
+ _ASM_MOV %_ASM_SI, (%_ASM_AX)
+ _ASM_MOVABS $init_thread_union+THREAD_SIZE, %_ASM_SP

#ifdef CONFIG_X86_64
/* Set up %gs.
@@ -46,7 +47,7 @@ ENTRY(startup_xen)
* init data section till per cpu areas are set up.
*/
movl $MSR_GS_BASE,%ecx
- movq $INIT_PER_CPU_VAR(irq_stack_union),%rax
+ movabsq $INIT_PER_CPU_VAR(irq_stack_union),%rax
cdq
wrmsr
#endif
diff --git a/arch/x86/xen/xen-pvh.S b/arch/x86/xen/xen-pvh.S
index ca2d3b2bf2af..82ba89ba8bb3 100644
--- a/arch/x86/xen/xen-pvh.S
+++ b/arch/x86/xen/xen-pvh.S
@@ -114,8 +114,8 @@ ENTRY(pvh_start_xen)
call xen_prepare_pvh

/* startup_64 expects boot_params in %rsi. */
- mov $_pa(pvh_bootparams), %rsi
- mov $_pa(startup_64), %rax
+ movabs $_pa(pvh_bootparams), %rsi
+ movabs $_pa(startup_64), %rax
jmp *%rax

#else /* CONFIG_X86_64 */
@@ -161,10 +161,15 @@ END(pvh_start_xen)

.section ".init.data","aw"
.balign 8
+ /*
+ * Use a quad for _pa(gdt_start) because PIE does not understand a
+ * long is enough. The resulting value will still be in the lower long
+ * part.
+ */
gdt:
.word gdt_end - gdt_start
- .long _pa(gdt_start)
- .word 0
+ .quad _pa(gdt_start)
+ .balign 8
gdt_start:
.quad 0x0000000000000000 /* NULL descriptor */
#ifdef CONFIG_X86_64
--
2.17.0.921.gf22659ad46-goog
\
 
 \ /
  Last update: 2018-05-30 00:21    [W:0.040 / U:1.928 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site