lkml.org 
[lkml]   [2018]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/6] PCI: iproc: Update iProc PCI binding for INTx support
Date
Update the iProc PCIe binding document for better modeling of the legacy
interrupt (INTx) support

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
---
.../devicetree/bindings/pci/brcm,iproc-pcie.txt | 31 +++++++++++++++++-----
1 file changed, 24 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
index b8e48b4..7ea24dc 100644
--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
@@ -13,9 +13,6 @@ controller, used in Stingray
PAXB-based root complex is used for external endpoint devices. PAXC-based
root complex is connected to emulated endpoint devices internal to the ASIC
- reg: base address and length of the PCIe controller I/O register space
-- #interrupt-cells: set to <1>
-- interrupt-map-mask and interrupt-map, standard PCI properties to define the
- mapping of the PCIe interface to interrupt numbers
- linux,pci-domain: PCI domain ID. Should be unique for each host controller
- bus-range: PCI bus numbers covered
- #address-cells: set to <3>
@@ -41,6 +38,16 @@ Required:
- brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal
address used by the iProc PCIe core (not the PCIe address)

+Legacy interrupt (INTx) support (optional):
+
+Note INTx is for PAXB only.
+
+- interrupt-controller: claims itself as an interrupt controller for INTx
+- #interrupt-cells: set to <1>
+- interrupt-map-mask and interrupt-map, standard PCI properties to define
+the mapping of the PCIe interface to interrupt numbers
+- interrupts: interrupt line wired to the generic GIC for INTx support
+
MSI support (optional):

For older platforms without MSI integrated in the GIC, iProc PCIe core provides
@@ -77,9 +84,14 @@ Example:
compatible = "brcm,iproc-pcie";
reg = <0x18012000 0x1000>;

+ interrupt-controller;
#interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie0 1>,
+ <0 0 0 2 &pcie0 2>,
+ <0 0 0 3 &pcie0 3>,
+ <0 0 0 4 &pcie0 4>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>;

linux,pci-domain = <0>;

@@ -115,9 +127,14 @@ Example:
compatible = "brcm,iproc-pcie";
reg = <0x18013000 0x1000>;

+ interrupt-controller;
#interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie1 1>,
+ <0 0 0 2 &pcie1 2>,
+ <0 0 0 3 &pcie1 3>,
+ <0 0 0 4 &pcie1 4>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;

linux,pci-domain = <1>;

--
2.1.4
\
 
 \ /
  Last update: 2018-05-30 00:01    [W:0.184 / U:11.648 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site