[lkml]   [2018]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/6] PAXB INTx support with proper model
This patch series adds PCIe legacy interrupt (INTx) support to the iProc
PCIe driver by modeling it with its own IRQ domain. All 4 interrupts INTA,
INTB, INTC, INTD share the same interrupt line connected to the GIC
in the system. This is now modeled by using its own IRQ domain.

Also update all relevant devicetree files to adapt to the new model

This patch series is available on GIHUB:
branch: pcie-intx-v1

Ray Jui (6):
PCI: iproc: Update iProc PCI binding for INTx support
PCI: iproc: Add INTx support with better modeling
arm: dts: Change PCIe INTx mapping for Cygnus
arm: dts: Change PCIe INTx mapping for NSP
arm: dts: Change PCIe INTx mapping for HR2
arm64: dts: Change PCIe INTx mapping for NS2

.../devicetree/bindings/pci/brcm,iproc-pcie.txt | 31 +++++--
arch/arm/boot/dts/bcm-cygnus.dtsi | 18 +++-
arch/arm/boot/dts/bcm-hr2.dtsi | 18 +++-
arch/arm/boot/dts/bcm-nsp.dtsi | 27 ++++--
arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 19 +++--
drivers/pci/host/pcie-iproc-platform.c | 2 +
drivers/pci/host/pcie-iproc.c | 95 +++++++++++++++++++++-
drivers/pci/host/pcie-iproc.h | 6 ++
8 files changed, 188 insertions(+), 28 deletions(-)


 \ /
  Last update: 2018-05-30 00:00    [W:0.112 / U:6.472 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site