lkml.org 
[lkml]   [2018]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] hwmon: binding: Fix "#cooling-cells" property's name
On Fri, May 25, 2018 at 10:49:57AM +0530, Viresh Kumar wrote:
> It should be "#cooling-cells" instead of "cooling-cells". Fix it.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Applied to hwmon-next after updating the subject.

Thanks,
Guenter

> ---
> Documentation/devicetree/bindings/hwmon/gpio-fan.txt | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
> index 439a7430fc68..2becdcfdc840 100644
> --- a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
> +++ b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
> @@ -11,7 +11,7 @@ Bindings for fan connected to GPIO lines
> must have the RPM values in ascending order.
> - alarm-gpios: This pin going active indicates something is wrong with
> the fan, and a udev event will be fired.
> -- cooling-cells: If used as a cooling device, must be <2>
> +- #cooling-cells: If used as a cooling device, must be <2>
> Also see: Documentation/devicetree/bindings/thermal/thermal.txt
> min and max states are derived from the speed-map of the fan.
>
> --
> 2.15.0.194.g9af6a3dea062
>

\
 
 \ /
  Last update: 2018-05-29 22:59    [W:0.036 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site