Messages in this thread | | | Subject | Re: [PATCH v2 3/4] dt-bindings: new binding for Ilitek ILI9341 display panels | From | David Lechner <> | Date | Fri, 25 May 2018 15:14:33 -0500 |
| |
On 05/25/2018 02:36 PM, David Lechner wrote: > This adds a new binding for Ilitek ILI9341 display panels. It includes > a compatible string for one display (more can be added in the future). > > The vendor prefix "noname" is used because the vendor is not known.
Looks like I forgot to update "noname" to "adafruit" in the commit message. Patch is as intended though.
> The YX240QV29-T panel[1] is found, for example, in an Adafruit breakout > board[2] and in Mindsensors' PiStorms[3]. > > [1]: https://cdn-learn.adafruit.com/assets/assets/000/046/879/original/SPEC-YX240QV29-T_Rev.A__1_.pdf > [2]: https://www.adafruit.com/product/2478 > [3]: http://www.mindsensors.com/stem-with-robotics/13-pistorms-v2-base-kit-raspberry-pi-brain-for-lego-robot > > Signed-off-by: David Lechner <david@lechnology.com> > --- > .../bindings/display/ilitek,ili9341.txt | 27 +++++++++++++++++++ > 1 file changed, 27 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9341.txt > > diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt b/Documentation/devicetree/bindings/display/ilitek,ili9341.txt > new file mode 100644 > index 000000000000..169b32e4ee4e > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/ilitek,ili9341.txt > @@ -0,0 +1,27 @@ > +Ilitek ILI9341 display panels > + > +This binding is for display panels using an Ilitek ILI9341 controller in SPI > +mode. > + > +Required properties: > +- compatible: "adafruit,yx240qv29", "ilitek,ili9341" > +- dc-gpios: D/C pin > +- reset-gpios: Reset pin > + > +The node for this driver must be a child node of a SPI controller, hence > +all mandatory properties described in ../spi/spi-bus.txt must be specified. > + > +Optional properties: > +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) > +- backlight: phandle of the backlight device attached to the panel > + > +Example: > + display@0{ > + compatible = "adafruit,yx240qv29", "ilitek,ili9341"; > + reg = <0>; > + spi-max-frequency = <32000000>; > + dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; > + reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; > + rotation = <270>; > + backlight = <&backlight>; > + }; >
| |