lkml.org 
[lkml]   [2018]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 1/7] dt-bindings: clk: at91: add an I2S mux clock
Date
The I2S mux clock can be used to select the I2S input clock. The
available parents are the peripheral and the generated clocks.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---
.../devicetree/bindings/clock/at91-clock.txt | 34 ++++++++++++++++++++++
1 file changed, 34 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
index 51c259a..1c46b3c 100644
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
@@ -90,6 +90,8 @@ Required properties:
"atmel,sama5d2-clk-audio-pll-pmc"
at91 audio pll output on AUDIOPLLCLK that feeds the PMC
and can be used by peripheral clock or generic clock
+ "atmel,sama5d2-clk-i2s-mux":
+ at91 I2S clock source selection

Required properties for SCKC node:
- reg : defines the IO memory reserved for the SCKC.
@@ -507,3 +509,35 @@ For example:
atmel,clk-output-range = <0 83000000>;
};
};
+
+Required properties for I2S mux clocks:
+- #size-cells : shall be 0 (reg is used to encode I2S bus id).
+- #address-cells : shall be 1 (reg is used to encode I2S bus id).
+- name: device tree node describing a specific mux clock.
+ * #clock-cells : from common clock binding; shall be set to 0.
+ * clocks : shall be the mux clock parent phandles; shall be 2 phandles:
+ peripheral and generated clock; the first phandle shall belong to the
+ peripheral clock and the second one shall belong to the generated
+ clock; "clock-indices" property can be user to specify
+ the correct order.
+ * reg: I2S bus id of the corresponding mux clock.
+ e.g. reg = <0>; for i2s0, reg = <1>; for i2s1
+
+For example:
+ i2s_clkmux {
+ compatible = "atmel,sama5d2-clk-i2s-mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2s0muxck: i2s0_muxclk {
+ clocks = <&i2s0_clk>, <&i2s0_gclk>;
+ #clock-cells = <0>;
+ reg = <0>;
+ };
+
+ i2s1muxck: i2s1_muxclk {
+ clocks = <&i2s1_clk>, <&i2s1_gclk>;
+ #clock-cells = <0>;
+ reg = <1>;
+ };
+ };
--
2.7.4
\
 
 \ /
  Last update: 2018-05-25 14:36    [W:0.152 / U:0.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site