lkml.org 
[lkml]   [2018]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH dts/arm/aspeed-g5 v1] ARM: dts: aspeed-g5: Add IPMI KCS node
From
Date
Hi Joel & Andrew

This patch is out of date. ;-)

New: https://patchwork.ozlabs.org/patch/893720/


On 2018-05-25 12:34, Joel Stanley wrote:
> Hello Andrew,
>
> On 16 March 2018 at 11:17, Wang, Haiyue <haiyue.wang@linux.intel.com> wrote:
>> Hi Joel and Andrew,
>>
>> Have time to review this patch ? Hope for your comments. :-)
>>
>> BR,
>> Haiyue
>>
>>
>> On 2018-03-07 13:04, Haiyue Wang wrote:
>>> The IPMI KCS device part of the LPC interface and is used for
>>> communication with the host processor.
>>>
>>> Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com>
> Do you have time to take a look at these? The device tree doesn't make
> sense to me.
>
> Cheers,
>
> Joel
>
>>> ---
>>> arch/arm/boot/dts/aspeed-g5.dtsi | 43
>>> +++++++++++++++++++++++++++++++++++++++-
>>> 1 file changed, 42 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi
>>> b/arch/arm/boot/dts/aspeed-g5.dtsi
>>> index 8eac57c..f443169 100644
>>> --- a/arch/arm/boot/dts/aspeed-g5.dtsi
>>> +++ b/arch/arm/boot/dts/aspeed-g5.dtsi
>>> @@ -267,8 +267,40 @@
>>> ranges = <0x0 0x1e789000 0x1000>;
>>> lpc_bmc: lpc-bmc@0 {
>>> - compatible =
>>> "aspeed,ast2500-lpc-bmc";
>>> + compatible =
>>> "aspeed,ast2500-lpc-bmc", "simple-mfd", "syscon";
>>> reg = <0x0 0x80>;
>>> + reg-io-width = <4>;
>>> +
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + ranges = <0x0 0x0 0x80>;
>>> +
>>> + kcs1: kcs1@0 {
>>> + compatible =
>>> "aspeed,ast2500-kcs-bmc";
>>> + reg = <0x0 0x80>;
>>> + interrupts = <8>;
>>> + kcs_chan = <1>;
>>> + kcs_addr = <0x0>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + kcs2: kcs2@0 {
>>> + compatible =
>>> "aspeed,ast2500-kcs-bmc";
>>> + reg = <0x0 0x80>;
>>> + interrupts = <8>;
>>> + kcs_chan = <2>;
>>> + kcs_addr = <0x0>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + kcs3: kcs3@0 {
>>> + compatible =
>>> "aspeed,ast2500-kcs-bmc";
>>> + reg = <0x0 0x80>;
>>> + interrupts = <8>;
>>> + kcs_chan = <3>;
>>> + kcs_addr = <0x0>;
>>> + status = "disabled";
>>> + };
>>> };
>>> lpc_host: lpc-host@80 {
>>> @@ -294,6 +326,15 @@
>>> status = "disabled";
>>> };
>>> + kcs4: kcs4@0 {
>>> + compatible =
>>> "aspeed,ast2500-kcs-bmc";
>>> + reg = <0x0 0xa0>;
>>> + interrupts = <8>;
>>> + kcs_chan = <4>;
>>> + kcs_addr = <0x0>;
>>> + status = "disabled";
>>> + };
>>> +
>>> lhc: lhc@20 {
>>> compatible =
>>> "aspeed,ast2500-lhc";
>>> reg = <0x20 0x24 0x48
>>> 0x8>;
>>

\
 
 \ /
  Last update: 2018-05-25 13:34    [W:0.071 / U:6.012 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site