lkml.org 
[lkml]   [2018]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 13/13] ARM: pxa: change SSP DMA channels allocation
Date
Now the dma_slave_map is available for PXA architecture, switch the SSP
device to it.

This specifically means that :
- for platform data based machines, the DMA requestor channels are
extracted from the slave map, where pxa-ssp-dai.<N> is a 1-1 match to
ssp.<N>, and the channels are either "rx" or "tx".

- for device tree platforms, the dma node should be hooked into the
pxa2xx-ac97 or pxa-ssp-dai node.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
Since v1: Removed channel names from platform_data
---
arch/arm/plat-pxa/ssp.c | 47 ----------------------------------------------
include/linux/pxa2xx_ssp.h | 2 --
sound/soc/pxa/pxa-ssp.c | 5 ++---
3 files changed, 2 insertions(+), 52 deletions(-)

diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index ba13f793fbce..ed36dcab80f1 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -127,53 +127,6 @@ static int pxa_ssp_probe(struct platform_device *pdev)
if (IS_ERR(ssp->clk))
return PTR_ERR(ssp->clk);

- if (dev->of_node) {
- struct of_phandle_args dma_spec;
- struct device_node *np = dev->of_node;
- int ret;
-
- /*
- * FIXME: we should allocate the DMA channel from this
- * context and pass the channel down to the ssp users.
- * For now, we lookup the rx and tx indices manually
- */
-
- /* rx */
- ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
- 0, &dma_spec);
-
- if (ret) {
- dev_err(dev, "Can't parse dmas property\n");
- return -ENODEV;
- }
- ssp->drcmr_rx = dma_spec.args[0];
- of_node_put(dma_spec.np);
-
- /* tx */
- ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
- 1, &dma_spec);
- if (ret) {
- dev_err(dev, "Can't parse dmas property\n");
- return -ENODEV;
- }
- ssp->drcmr_tx = dma_spec.args[0];
- of_node_put(dma_spec.np);
- } else {
- res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- if (res == NULL) {
- dev_err(dev, "no SSP RX DRCMR defined\n");
- return -ENODEV;
- }
- ssp->drcmr_rx = res->start;
-
- res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
- if (res == NULL) {
- dev_err(dev, "no SSP TX DRCMR defined\n");
- return -ENODEV;
- }
- ssp->drcmr_tx = res->start;
- }
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(dev, "no memory resource defined\n");
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index 8461b18e4608..03a7ca46735b 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -212,8 +212,6 @@ struct ssp_device {
int type;
int use_count;
int irq;
- int drcmr_rx;
- int drcmr_tx;

struct device_node *of_node;
};
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 0291c7cb64eb..e09368d89bbc 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -104,9 +104,8 @@ static int pxa_ssp_startup(struct snd_pcm_substream *substream,
dma = kzalloc(sizeof(struct snd_dmaengine_dai_dma_data), GFP_KERNEL);
if (!dma)
return -ENOMEM;
-
- dma->filter_data = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
- &ssp->drcmr_tx : &ssp->drcmr_rx;
+ dma->chan_name = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+ "tx" : "rx";

snd_soc_dai_set_dma_data(cpu_dai, substream, dma);

--
2.11.0
\
 
 \ /
  Last update: 2018-05-24 09:12    [W:0.175 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site