lkml.org 
[lkml]   [2018]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 3/4] ARM: dts: tegra: Fix unit_address_vs_reg and avoid_unnecessary_addr_size DTC warnings
Date
Remove unneeded address/size cells properties and unit addresses to fix
DTC warnings like:

arch/arm/boot/dts/tegra30-apalis-eval.dtb: Warning (unit_address_vs_reg):
/i2c@7000d000/stmpe811@41/stmpe_touchscreen@0: node has a unit name, but no reg property
arch/arm/boot/dts/tegra30-apalis-eval.dtb: Warning (avoid_unnecessary_addr_size):
/i2c@7000d000/stmpe811@41: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Stefan Agner <stefan@agner.ch>

---

Changes since v6:
1. None

Changes since v5:
1. Add Stefan's reviewed-by tag.

Changes since v4:
1. None
---
arch/arm/boot/dts/tegra30-apalis.dtsi | 4 +---
arch/arm/boot/dts/tegra30-beaver.dts | 3 ---
arch/arm/boot/dts/tegra30-colibri.dtsi | 2 --
3 files changed, 1 insertion(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 9465fc592b7b..d1a2c0a253c8 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -589,8 +589,6 @@
/* STMPE811 touch screen controller */
stmpe811@41 {
compatible = "st,stmpe811";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0x41>;
interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpio>;
@@ -599,7 +597,7 @@
blocks = <0x5>;
irq-trigger = <0x1>;

- stmpe_touchscreen@0 {
+ stmpe_touchscreen {
compatible = "st,stmpe-ts";
/* 3.25 MHz ADC clock speed */
st,adc-freq = <1>;
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index 1434d50438f9..b0d40ac8ac6e 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -1790,9 +1790,6 @@
vccio-supply = <&vdd_5v_in_reg>;

regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
vdd1_reg: vdd1 {
regulator-name = "vddio_ddr_1v2";
regulator-min-microvolt = <1200000>;
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 9bf3327665d3..526ed71cf7a3 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -351,8 +351,6 @@
/* STMPE811 touch screen controller */
stmpe811@41 {
compatible = "st,stmpe811";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0x41>;
interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpio>;
--
2.7.4
\
 
 \ /
  Last update: 2018-05-24 08:55    [W:0.073 / U:21.816 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site