lkml.org 
[lkml]   [2018]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 140/165] media: cx23885: Override 888 ImpactVCBe crystal frequency
Date
4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brad Love <brad@nextdimension.cc>

[ Upstream commit 779c79d4b833ec646b0aed878da38edb45bbe156 ]

Hauppauge produced a revision of ImpactVCBe using an 888,
with a 25MHz crystal, instead of using the default third
overtone 50Mhz crystal. This overrides that frequency so
that the cx25840 is properly configured. Without the proper
crystal setup the cx25840 cannot load the firmware or
decode video.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/media/pci/cx23885/cx23885-core.c | 10 ++++++++++
1 file changed, 10 insertions(+)

--- a/drivers/media/pci/cx23885/cx23885-core.c
+++ b/drivers/media/pci/cx23885/cx23885-core.c
@@ -873,6 +873,16 @@ static int cx23885_dev_setup(struct cx23
if (cx23885_boards[dev->board].clk_freq > 0)
dev->clk_freq = cx23885_boards[dev->board].clk_freq;

+ if (dev->board == CX23885_BOARD_HAUPPAUGE_IMPACTVCBE &&
+ dev->pci->subsystem_device == 0x7137) {
+ /* Hauppauge ImpactVCBe device ID 0x7137 is populated
+ * with an 888, and a 25Mhz crystal, instead of the
+ * usual third overtone 50Mhz. The default clock rate must
+ * be overridden so the cx25840 is properly configured
+ */
+ dev->clk_freq = 25000000;
+ }
+
dev->pci_bus = dev->pci->bus->number;
dev->pci_slot = PCI_SLOT(dev->pci->devfn);
cx23885_irq_add(dev, 0x001f00);

\
 
 \ /
  Last update: 2018-05-24 12:52    [W:0.401 / U:0.948 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site