lkml.org 
[lkml]   [2018]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] kdump: add default crashkernel reserve kernel config options
Dave Young <dyoung@redhat.com> writes:

> [snip]
>
>> >
>> > +config CRASHKERNEL_DEFAULT_THRESHOLD_MB
>> > + int "System memory size threshold for kdump memory default reserving"
>> > + depends on CRASH_CORE
>> > + default 0
>> > + help
>> > + CRASHKERNEL_DEFAULT_MB is used as default crashkernel value if
>> > + the system memory size is equal or bigger than the threshold.
>>
>> "the threshold" is rather vague. Can it be clarified?
>>
>> In fact I'm really struggling to understand the logic here....
>>
>>
>> > +config CRASHKERNEL_DEFAULT_MB
>> > + int "Default crashkernel memory size reserved for kdump"
>> > + depends on CRASH_CORE
>> > + default 0
>> > + help
>> > + This is used as the default kdump reserved memory size in MB.
>> > + crashkernel=X kernel cmdline can overwrite this value.
>> > +
>> > config HAVE_IMA_KEXEC
>> > bool
>> >
>> > @@ -143,6 +144,24 @@ static int __init parse_crashkernel_simp
>> > return 0;
>> > }
>> >
>> > +static int __init get_crashkernel_default(unsigned long long system_ram,
>> > + unsigned long long *size)
>> > +{
>> > + unsigned long long sz = CONFIG_CRASHKERNEL_DEFAULT_MB;
>> > + unsigned long long thres = CONFIG_CRASHKERNEL_DEFAULT_THRESHOLD_MB;
>> > +
>> > + thres *= SZ_1M;
>> > + sz *= SZ_1M;
>> > +
>> > + if (sz >= system_ram || system_ram < thres) {
>> > + pr_debug("crashkernel default size can not be used.\n");
>> > + return -EINVAL;
>>
>> In other words,
>>
>> if (system_ram <= CONFIG_CRASHKERNEL_DEFAULT_MB ||
>> system_ram < CONFIG_CRASHKERNEL_DEFAULT_THRESHOLD_MB)
>> fail;
>>
>> yes?
>>
>> How come? What's happening here? Perhaps a (good) explanatory comment
>> is needed. And clearer Kconfig text.
>>
>> All confused :(
>
> Andrew, I tuned it a bit, removed the check of sz >= system_ram, so if
> the size is too large and kernel can not find enough memory it will
> still fail in latter code.
>
> Is below version looks clearer?

What is the advantage of providing this in a kconfig option rather
than on the kernel command line as we can now?

Eric

> ---
>
> This is a rework of the crashkernel=auto patches back to 2009 although
> I'm not sure if below is the last version of the old effort:
> https://lkml.org/lkml/2009/8/12/61
> https://lwn.net/Articles/345344/
>
> I changed the original design, instead of adding the auto reserve logic
> in code, in this patch just introduce two kernel config options for
> the default crashkernel value in MB and the threshold of system memory
> in MB so that only reserve default when system memory is equal or
> above the threshold.
>
> Signed-off-by: Dave Young <dyoung@redhat.com>
> ---
> Another difference is with original design the crashkernel size scales
> with system memory, according to test, large machine may need more
> memory in kdump kernel because of several factors:
> 1. cpu numbers, because of the percpu memory allocated for cpus.
> (kdump can use nr_cpus=1 to workaround this, but some
> arches do not support nr_cpus=X for example powerpc)
> 2. IO devices, large system can have a lot of io devices, although we
> can try to only add those device drivers we needed, it is still a
> problem because of some built-in drivers, some stacked logical devices
> eg. device mapper devices, acpi etc. Even if only considering the
> meta data for driver model it will still be a big number eg. sysfs
> files etc.
> 3. The minimum memory requirement for some device drivers are big, even
> if some of them have implemented low meory profile. It is usual to see
> 10M memory use for a storage driver.
> 4. user space initramfs size growing. Busybox is not usable if we need
> to add udev support and some complicate storage support. Use dracut
> with systemd, especially networking stuff need more memory.
>
> So probably add another kernel config option to scale the memory size
> eg. CRASHKERNEL_DEFAULT_SCALE_RATIO is also good to have, in RHEL we
> use base_value + system_mem >> (2^14) for x86. I'm still hesatating
> how to describe and add this option. Any suggestions will be appreciated.
>
> arch/Kconfig | 17 +++++++++++++++++
> kernel/crash_core.c | 19 ++++++++++++++++++-
> 2 files changed, 35 insertions(+), 1 deletion(-)
>
> --- linux-x86.orig/arch/Kconfig
> +++ linux-x86/arch/Kconfig
> @@ -10,6 +10,23 @@ config KEXEC_CORE
> select CRASH_CORE
> bool
>
> +config CRASHKERNEL_DEFAULT_THRESHOLD_MB
> + int "System memory size threshold for using CRASHKERNEL_DEFAULT_MB"
> + depends on CRASH_CORE
> + default 0
> + help
> + CRASHKERNEL_DEFAULT_MB will be reserved for kdump if the system
> + memory is above or equal to CRASHKERNEL_DEFAULT_THRESHOLD_MB MB.
> + It is only effective in case no crashkernel=X parameter is used.
> +
> +config CRASHKERNEL_DEFAULT_MB
> + int "Default crashkernel memory size reserved for kdump"
> + depends on CRASH_CORE
> + default 0
> + help
> + This is used as the default kdump reserved memory size in MB.
> + crashkernel=X kernel cmdline can overwrite this value.
> +
> config HAVE_IMA_KEXEC
> bool
>
> --- linux-x86.orig/kernel/crash_core.c
> +++ linux-x86/kernel/crash_core.c
> @@ -143,6 +143,21 @@ static int __init parse_crashkernel_simp
> return 0;
> }
>
> +static int __init get_crashkernel_default(unsigned long long system_ram,
> + unsigned long long *size)
> +{
> + unsigned long long system_ram_mb = system_ram >> 20;
> +
> + if (system_ram_mb < CONFIG_CRASHKERNEL_DEFAULT_THRESHOLD_MB) {
> + pr_debug("crashkernel: system memory size is lower than %d\n",
> + CONFIG_CRASHKERNEL_DEFAULT_THRESHOLD_MB);
> + return -EINVAL;
> + }
> + *size = (unsigned long long)CONFIG_CRASHKERNEL_DEFAULT_MB << 20;
> +
> + return 0;
> +}
> +
> #define SUFFIX_HIGH 0
> #define SUFFIX_LOW 1
> #define SUFFIX_NULL 2
> @@ -240,8 +255,10 @@ static int __init __parse_crashkernel(ch
> *crash_size = 0;
> *crash_base = 0;
>
> - ck_cmdline = get_last_crashkernel(cmdline, name, suffix);
> + if (!strstr(cmdline, "crashkernel="))
> + return get_crashkernel_default(system_ram, crash_size);
>
> + ck_cmdline = get_last_crashkernel(cmdline, name, suffix);
> if (!ck_cmdline)
> return -EINVAL;
>

\
 
 \ /
  Last update: 2018-05-23 17:55    [W:0.105 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site