lkml.org 
[lkml]   [2018]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] x86: UV: raw_spinlock conversion
On 2018-05-19 16:09:56 [+0200], Mike Galbraith wrote:
> None of that patch is needed for a UV3000, but the below is. It's
> likely still valid for now ancient UV boxen, but the UV100 the patch
> was originally written for (2011/2.6.33-rt) has apparently wandered off
> to become a beer keg or something meanwhile, so I can't test.

so the old patch can go. Noted.
Regarding the preempt_disable() in the original patch in uv_read_rtc():
This looks essential for PREEMPT configs. Is it possible to get this
tested by someone or else get rid of the UV code? It looks broken for
"uv_get_min_hub_revision_id() != 1".

> UV: Fix uv_bau_init() check_preemption_disabled() gripeage
>
> [ 2.851947] BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
> [ 2.851951] caller is uv_bau_init+0x28/0xb62
> [ 2.851954] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.17.0-rc5-0.g3e3e37b-rt_debug
> [ 2.851956] Hardware name: SGI UV3000/UV3000, BIOS SGI UV 3000 series BIOS 01/15/2015
> [ 2.851957] Call Trace:
> [ 2.851964] dump_stack+0x85/0xcb
> [ 2.851969] check_preemption_disabled+0x10c/0x120
> [ 2.851972] ? init_per_cpu+0x88c/0x88c
> [ 2.851974] uv_bau_init+0x28/0xb62
> [ 2.851979] ? lapic_cal_handler+0xbb/0xbb
> [ 2.851982] ? rt_mutex_unlock+0x35/0x50
> [ 2.851985] ? init_per_cpu+0x88c/0x88c
> [ 2.851988] ? set_debug_rodata+0x11/0x11
> [ 2.851991] do_one_initcall+0x46/0x249
> [ 2.851995] kernel_init_freeable+0x207/0x29c
> [ 2.851999] ? rest_init+0xd0/0xd0
> [ 2.852000] kernel_init+0xa/0x110
> [ 2.852000] ret_from_fork+0x3a/0x50
>
> (gdb) list *uv_bau_init+0x28
> 0xffffffff824a4d96 is in uv_bau_init (./arch/x86/include/asm/uv/uv_hub.h:212).
> 207 return (struct uv_hub_info_s *)__uv_hub_info_list[node];
> 208 }
> 209
> 210 static inline struct uv_hub_info_s *_uv_hub_info(void)
> 211 {
> 212 return (struct uv_hub_info_s *)uv_cpu_info->p_uv_hub_info;
> 213 }
> 214 #define uv_hub_info _uv_hub_info()
> 215
> 216 static inline struct uv_hub_info_s *uv_cpu_hub_info(int cpu)
> (gdb)
>
> arch/x86/include/asm/uv/uv_hub.h:
> 197 #define uv_cpu_info this_cpu_ptr(&__uv_cpu_info)
>
> This and other substitutions make uv_bau_init() annoying for a PREEMPT
> kernel, but PREEMPT_RT can silence the lot with one migrate_disable().

Why does PREEMPT_RT require migrate_disable() but PREEMPT only is fine
as-is? This does not look right.

> Signed-off-by: Mike Galbraith <efault@gmx.de>
> ---
> arch/x86/platform/uv/tlb_uv.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> --- a/arch/x86/platform/uv/tlb_uv.c
> +++ b/arch/x86/platform/uv/tlb_uv.c
> @@ -2213,6 +2213,8 @@ static int __init uv_bau_init(void)
> if (!is_uv_system())
> return 0;
>
> + migrate_disable();
> +
> if (is_uv4_hub())
> ops = uv4_bau_ops;
> else if (is_uv3_hub())
> @@ -2269,6 +2271,8 @@ static int __init uv_bau_init(void)
> }
> }
>
> + migrate_enable();
> +
> return 0;
>
> err_bau_disable:
> @@ -2276,6 +2280,7 @@ static int __init uv_bau_init(void)
> for_each_possible_cpu(cur_cpu)
> free_cpumask_var(per_cpu(uv_flush_tlb_mask, cur_cpu));
>
> + migrate_enable();
> set_bau_off();
> nobau_perm = 1;
>

Sebastian

\
 
 \ /
  Last update: 2018-05-22 08:51    [W:0.419 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site