lkml.org 
[lkml]   [2018]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/6] ARM: OMAP1: ams-delta: add GPIO lookup tables
Hi,

* Janusz Krzysztofik <jmkrzyszt@gmail.com> [180518 14:12]:
> Scope of the change is limited to GPIO pins used by board specific
> device drivers which will be updated by follow-up patches of the
> series. Those are some OMAP GPIO (gpio-0-15) and most of Amstrad Delta
> latch2 GPIO bank pins. Remaining pins of those banks, as well as
> Amstrad Delta latch1 pins, will be addressed later.
>
> Assign a label ("latch2") to the bank, enumerate its pins and put that
> information, together with OMAP GPIO bank pins, in GPIO lookup tables.
> Assign lookup tables to devices as soon as those devices are registered
> and their names can be obtained.
>
> A step froward in:
> - removal of hard-coded GPIO numbers from drivers,
> - removal of board mach includes from drivers,
> - switching to dynamically assigned GPIO numbers.

Is this first patch safe for me to apply separately?

Regards,

Tony

\
 
 \ /
  Last update: 2018-05-21 19:36    [W:0.280 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site