lkml.org 
[lkml]   [2018]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/3] arm64: dts: qcom: msm8996: Add ufs related nodes
Date
Add the UFS QMP phy node and the UFS host controller node, now that we
have working UFS and the necessary clocks in place.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 8 ++
arch/arm64/boot/dts/qcom/msm8996.dtsi | 85 ++++++++++++++++++++
2 files changed, 93 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 8be666ea92bd..00e3ecd1180a 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -122,6 +122,14 @@
status = "okay";
};

+ phy@627000 {
+ status = "okay";
+ };
+
+ ufshc@624000 {
+ status = "okay";
+ };
+
phy@34000 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 37b7152cb064..221bb3d383c5 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -633,6 +633,91 @@
#interrupt-cells = <4>;
};

+ ufsphy: phy@627000 {
+ compatible = "qcom,msm8996-ufs-phy-qmp-14nm";
+ reg = <0x627000 0xda8>;
+ reg-names = "phy_mem";
+ #phy-cells = <0>;
+
+ vdda-phy-supply = <&pm8994_l28>;
+ vdda-pll-supply = <&pm8994_l12>;
+
+ vdda-phy-max-microamp = <18380>;
+ vdda-pll-max-microamp = <9440>;
+
+ vddp-ref-clk-supply = <&pm8994_l25>;
+ vddp-ref-clk-max-microamp = <100>;
+ vddp-ref-clk-always-on;
+
+ clock-names = "ref_clk_src", "ref_clk";
+ clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+ <&gcc GCC_UFS_CLKREF_CLK>;
+ status = "disabled";
+
+ power-domains = <&gcc UFS_GDSC>;
+ };
+
+ ufshc@624000 {
+ compatible = "qcom,ufshc";
+ reg = <0x624000 0x2500>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+ phys = <&ufsphy>;
+ phy-names = "ufsphy";
+
+ vcc-supply = <&pm8994_l20>;
+ vccq-supply = <&pm8994_l25>;
+ vccq2-supply = <&pm8994_s4>;
+
+ vcc-max-microamp = <600000>;
+ vccq-max-microamp = <450000>;
+ vccq2-max-microamp = <450000>;
+
+ clock-names =
+ "core_clk_src",
+ "core_clk",
+ "bus_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro_src",
+ "core_clk_unipro",
+ "core_clk_ice",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk";
+ clocks =
+ <&gcc UFS_AXI_CLK_SRC>,
+ <&gcc GCC_UFS_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_UFS_AXI_CLK>,
+ <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+ <&gcc GCC_UFS_AHB_CLK>,
+ <&gcc UFS_ICE_CORE_CLK_SRC>,
+ <&gcc GCC_UFS_UNIPRO_CORE_CLK>,
+ <&gcc GCC_UFS_ICE_CORE_CLK>,
+ <&rpmcc RPM_SMD_LN_BB_CLK>,
+ <&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_RX_SYMBOL_0_CLK>;
+ freq-table-hz =
+ <100000000 200000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <150000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+
+ lanes-per-direction = <1>;
+ status = "disabled";
+
+ ufs_variant {
+ compatible = "qcom,ufs_variant";
+ };
+ };
+
mmcc: clock-controller@8c0000 {
compatible = "qcom,mmcc-msm8996";
#clock-cells = <1>;
--
2.17.0
\
 
 \ /
  Last update: 2018-05-18 08:27    [W:0.049 / U:12.528 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site