lkml.org 
[lkml]   [2018]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v5 4/4] drm/rockchip: support dp training outside dp firmware
Date
Am Freitag, 18. Mai 2018, 03:45:46 CEST schrieb Brian Norris:
> On Thu, May 17, 2018 at 6:41 PM, hl <hl@rock-chips.com> wrote:
> > On Thursday, May 17, 2018 09:51 PM, Sean Paul wrote:
> >> On Thu, May 17, 2018 at 05:18:00PM +0800, Lin Huang wrote:
> >>> DP firmware uses fixed phy config values to do training, but some
> >>> boards need to adjust these values to fit for their unique hardware
> >>> design. So get phy config values from dts and use software link training
> >>> instead of relying on firmware, if software training fail, keep firmware
> >>> training as a fallback if sw training fails.
> >>>
> >>> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> >>> Signed-off-by: Lin Huang <hl@rock-chips.com>
> >>> ---
> >>> Changes in v2:
> >>> - update patch following Enric suggest
> >>> Changes in v3:
> >>> - use variable fw_training instead sw_training_success
> >>> - base on DP SPCE, if training fail use lower link rate to retry training
> >>> Changes in v4:
> >>> - improve cdn_dp_get_lower_link_rate() and cdn_dp_software_train_link() follow Sean suggest
> >>> Changes in v5:
> >>> - fix some whitespcae issue
> >>>
> >>> drivers/gpu/drm/rockchip/Makefile | 3 +-
> >>> drivers/gpu/drm/rockchip/cdn-dp-core.c | 24 +-
> >>> drivers/gpu/drm/rockchip/cdn-dp-core.h | 2 +
> >>> drivers/gpu/drm/rockchip/cdn-dp-link-training.c | 420 ++++++++++++++++++++++++
> >>> drivers/gpu/drm/rockchip/cdn-dp-reg.c | 31 +-
> >>> drivers/gpu/drm/rockchip/cdn-dp-reg.h | 38 ++-
> >>> 6 files changed, 505 insertions(+), 13 deletions(-)
> >>> create mode 100644 drivers/gpu/drm/rockchip/cdn-dp-link-training.c
> >>>
> ...
> >>> diff --git a/drivers/gpu/drm/rockchip/cdn-dp-link-training.c b/drivers/gpu/drm/rockchip/cdn-dp-link-training.c
> >>> new file mode 100644
> >>> index 0000000..73c3290
> >>> --- /dev/null
> >>> +++ b/drivers/gpu/drm/rockchip/cdn-dp-link-training.c
> >>> @@ -0,0 +1,420 @@
> >>> +// SPDX-License-Identifier: GPL-2.0
> >>> +/*
> >>> + * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
> >>> + * Author: Chris Zhong <zyw@rock-chips.com>
> >>> + */
> >>> +
> >>> +#include <linux/device.h>
> >>> +#include <linux/delay.h>
> >>> +#include <linux/phy/phy.h>
> >>> +#include <soc/rockchip/rockchip_phy_typec.h>
> >>> +
> >>> +#include "cdn-dp-core.h"
> >>> +#include "cdn-dp-reg.h"
> >>> +
> >>> +static void cdn_dp_set_signal_levels(struct cdn_dp_device *dp)
> >>> +{
> >>> + struct cdn_dp_port *port = dp->port[dp->active_port];
> >>> + struct rockchip_typec_phy *tcphy = phy_get_drvdata(port->phy);
> >>
> >> You ignored Brian's comment on the previous patch:
> >> This is still antithetical to the PHY framework; you're assuming that
> >> this is a particular type of PHY here.
> >>
> >> FWIW, the mediatek drm driver also assumes a certain PHY type. A quick grep of
> >> drivers/ shows that the only other non-phy/ driver using this function
> >> (pinctrl-tegra-xusb.c) also casts it.
> >>
> >> Sean
> >
> > Thanks Sean, except phy framework have new API to handle it, i have not
> > idea how to do it in a better way.
>
> Well, if Mediatek can do it for their MIPI and HDMI, then maybe we just do it...

I'd think so too. This is in Rockchip-specific code so it will always be
possible to easily get the soc-type and thus phy-type, if that combination
really changes down the road.


Heiko


\
 
 \ /
  Last update: 2018-05-18 10:55    [W:0.217 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site