lkml.org 
[lkml]   [2018]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectApplied "regulator: wm8994: Pass descriptor instead of GPIO number" to the regulator tree
Date
The patch

regulator: wm8994: Pass descriptor instead of GPIO number

has been applied to the regulator tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 3c6b38d45fa51c7c51c5e2347fc1a6bef6a46525 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Mon, 14 May 2018 10:06:34 +0200
Subject: [PATCH] regulator: wm8994: Pass descriptor instead of GPIO number

Instead of passing a global GPIO number for the enable GPIO, pass
a descriptor looked up from the device tree node or the board file
decriptor table for the regulator.

There is a single board file passing the GPIOs for LDO1 and LDO2
through platform data, so augment this to pass descriptors
associated with the i2c device as well.

The special GPIO enable DT property for the enable GPIO is
nonstandard but this was accomodated in
commit 6a537d48461deacc57c07ed86d9915e5aa4b3539
"gpio: of: Support regulator nonstandard GPIO properties".

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
arch/arm/mach-s3c64xx/mach-crag6410-module.c | 17 +++++++++++++++--
drivers/mfd/wm8994-core.c | 9 ---------
drivers/regulator/wm8994-regulator.c | 19 +++++++++++--------
include/linux/mfd/wm8994/pdata.h | 3 ---
4 files changed, 26 insertions(+), 22 deletions(-)

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 5aa472892465..76c4855a03bc 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -194,8 +194,8 @@ static struct wm8994_pdata wm8994_pdata = {
0x3, /* IRQ out, active high, CMOS */
},
.ldo = {
- { .enable = S3C64XX_GPN(6), .init_data = &wm8994_ldo1, },
- { .enable = S3C64XX_GPN(4), .init_data = &wm8994_ldo2, },
+ { .init_data = &wm8994_ldo1, },
+ { .init_data = &wm8994_ldo2, },
},
};

@@ -203,6 +203,18 @@ static const struct i2c_board_info wm1277_devs[] = {
{ I2C_BOARD_INFO("wm8958", 0x1a), /* WM8958 is the superset */
.platform_data = &wm8994_pdata,
.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+ .dev_name = "wm8958",
+ },
+};
+
+static struct gpiod_lookup_table wm8994_gpiod_table = {
+ .dev_id = "i2c-wm8958", /* I2C device name */
+ .table = {
+ GPIO_LOOKUP("GPION", 6,
+ "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPION", 4,
+ "wlf,ldo2ena", GPIO_ACTIVE_HIGH),
+ { },
},
};

@@ -381,6 +393,7 @@ static int wlf_gf_module_probe(struct i2c_client *i2c,

gpiod_add_lookup_table(&wm5102_reva_gpiod_table);
gpiod_add_lookup_table(&wm5102_gpiod_table);
+ gpiod_add_lookup_table(&wm8994_gpiod_table);

if (i < ARRAY_SIZE(gf_mods)) {
dev_info(&i2c->dev, "%s revision %d\n",
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index 953d0790ffd5..c409464231f6 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -21,7 +21,6 @@
#include <linux/mfd/core.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_gpio.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
@@ -302,14 +301,6 @@ static int wm8994_set_pdata_from_of(struct wm8994 *wm8994)
if (of_find_property(np, "wlf,ldoena-always-driven", NULL))
pdata->lineout2fb = true;

- pdata->ldo[0].enable = of_get_named_gpio(np, "wlf,ldo1ena", 0);
- if (pdata->ldo[0].enable < 0)
- pdata->ldo[0].enable = 0;
-
- pdata->ldo[1].enable = of_get_named_gpio(np, "wlf,ldo2ena", 0);
- if (pdata->ldo[1].enable < 0)
- pdata->ldo[1].enable = 0;
-
return 0;
}
#else
diff --git a/drivers/regulator/wm8994-regulator.c b/drivers/regulator/wm8994-regulator.c
index 7a4ce6df4f22..d3a5f48119c2 100644
--- a/drivers/regulator/wm8994-regulator.c
+++ b/drivers/regulator/wm8994-regulator.c
@@ -19,7 +19,7 @@
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/slab.h>

#include <linux/mfd/wm8994/core.h>
@@ -129,6 +129,7 @@ static int wm8994_ldo_probe(struct platform_device *pdev)
int id = pdev->id % ARRAY_SIZE(pdata->ldo);
struct regulator_config config = { };
struct wm8994_ldo *ldo;
+ struct gpio_desc *gpiod;
int ret;

dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1);
@@ -145,12 +146,14 @@ static int wm8994_ldo_probe(struct platform_device *pdev)
config.driver_data = ldo;
config.regmap = wm8994->regmap;
config.init_data = &ldo->init_data;
- if (pdata) {
- config.ena_gpio = pdata->ldo[id].enable;
- } else if (wm8994->dev->of_node) {
- config.ena_gpio = wm8994->pdata.ldo[id].enable;
- config.ena_gpio_initialized = true;
- }
+
+ /* Look up LDO enable GPIO from the parent device node */
+ gpiod = devm_gpiod_get_optional(pdev->dev.parent,
+ id ? "wlf,ldo2ena" : "wlf,ldo1ena",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(gpiod))
+ return PTR_ERR(gpiod);
+ config.ena_gpiod = gpiod;

/* Use default constraints if none set up */
if (!pdata || !pdata->ldo[id].init_data || wm8994->dev->of_node) {
@@ -159,7 +162,7 @@ static int wm8994_ldo_probe(struct platform_device *pdev)

ldo->init_data = wm8994_ldo_default[id];
ldo->init_data.consumer_supplies = &ldo->supply;
- if (!config.ena_gpio)
+ if (!gpiod)
ldo->init_data.constraints.valid_ops_mask = 0;
} else {
ldo->init_data = *pdata->ldo[id].init_data;
diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
index 90c60524a496..fca67bd194e2 100644
--- a/include/linux/mfd/wm8994/pdata.h
+++ b/include/linux/mfd/wm8994/pdata.h
@@ -20,9 +20,6 @@
#define WM8994_NUM_AIF 3

struct wm8994_ldo_pdata {
- /** GPIOs to enable regulator, 0 or less if not available */
- int enable;
-
const struct regulator_init_data *init_data;
};

--
2.17.0
\
 
 \ /
  Last update: 2018-05-17 18:50    [W:0.144 / U:1.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site