lkml.org 
[lkml]   [2018]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[v0 1/2] dt-bindings: clock: Introduce QCOM CPUFREQ FW bindings
Date
Add QCOM cpufreq firmware device bindings for Qualcomm Technology Inc's
SoCs. This is required for managing the cpu frequency transitions which are
controlled by firmware.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
.../bindings/cpufreq/cpufreq-qcom-fw.txt | 68 ++++++++++++++++++++++
1 file changed, 68 insertions(+)
create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-fw.txt

diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-fw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-fw.txt
new file mode 100644
index 0000000..bc912f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-fw.txt
@@ -0,0 +1,68 @@
+Qualcomm Technologies, Inc. CPUFREQ Bindings
+
+CPUFREQ FW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
+SoCs to manage frequency in hardware. It is capable of controlling frequency
+for multiple clusters.
+
+Properties:
+- compatible
+ Usage: required
+ Value type: <string>
+ Definition: must be "qcom,cpufreq-fw".
+
+Note that #address-cells, #size-cells, and ranges shall be present to ensure
+the cpufreq can address a freq-domain registers.
+
+A freq-domain sub-node would be defined for the cpus with the following
+properties:
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be "cpufreq".
+
+- reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Addresses and sizes for the memory of the perf_base
+ , lut_base and en_base.
+- reg-names
+ Usage: required
+ Value type: <stringlist>
+ Definition: Address names. Must be "perf_base", "lut_base",
+ "en_base".
+ Must be specified in the same order as the
+ corresponding addresses are specified in the reg
+ property.
+
+- qcom,cpulist
+ Usage: required
+ Value type: <phandles of CPU>
+ Definition: List of related cpu handles which are under a cluster.
+
+Example:
+ qcom,cpufreq-fw {
+ compatible = "qcom,cpufreq-fw";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ freq-domain-0 {
+ compatible = "cpufreq";
+ reg = <0x17d43920 0x4>,
+ <0x17d43110 0x500>,
+ <0x17d41000 0x4>;
+ reg-names = "perf_base", "lut_base", "en_base";
+ qcom,cpulist = <&CPU0 &CPU1 &CPU2 &CPU3>;
+ };
+
+ freq-domain-1 {
+ compatible = "cpufreq";
+ reg = <0x17d46120 0x4>,
+ <0x17d45910 0x500>,
+ <0x17d45800 0x4>;
+ reg-names = "perf_base", "lut_base", "en_base";
+ qcom,cpulist = <&CPU4 &CPU5 &CPU6 &CPU7>;
+ };
+ };
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
\
 
 \ /
  Last update: 2018-05-17 11:31    [W:0.079 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site