lkml.org 
[lkml]   [2018]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] PM / devfreq: Add support for QCOM devfreq FW
Hi,

On 2018년 05월 17일 15:02, Saravana Kannan wrote:
> The firmware present in some QCOM chipsets offloads the steps necessary for
> changing the frequency of some devices (Eg: L3). This driver implements the
> devfreq interface for this firmware so that various governors could be used
> to scale the frequency of these devices.

The description doesn't include what kind of firmware. You have to explain
the type and role of firmware. And it doesn't contain the description of correlation
between 'qcom,devfreq-fw' and 'qcom,devfreq-fw-voter'.

>
> Signed-off-by: Saravana Kannan <skannan@codeaurora.org>
> ---
> .../bindings/devfreq/devfreq-qcom-fw.txt | 31 ++
> drivers/devfreq/Kconfig | 14 +
> drivers/devfreq/Makefile | 1 +
> drivers/devfreq/devfreq_qcom_fw.c | 326 +++++++++++++++++++++
> 4 files changed, 372 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/devfreq/devfreq-qcom-fw.txt
> create mode 100644 drivers/devfreq/devfreq_qcom_fw.c
>
> diff --git a/Documentation/devicetree/bindings/devfreq/devfreq-qcom-fw.txt b/Documentation/devicetree/bindings/devfreq/devfreq-qcom-fw.txt
> new file mode 100644
> index 0000000..5e1aecf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/devfreq/devfreq-qcom-fw.txt
> @@ -0,0 +1,31 @@
> +QCOM Devfreq FW device
> +
> +Some Qualcomm Technologies, Inc. (QTI) chipsets have a FW that offloads the

you better to change the FW for more readability.
- s/FW/firmware

> +steps for frequency switching. The qcom,devfreq-fw represents this FW as a
- s/FW/firmware

Usually, DVFS feature uses the 'frequency scaling' word.
- s/frequency switching/frequency scaling

> +device. Sometimes, multiple entities want to vote on the frequency request
> +that is sent to the FW. The qcom,devfreq-fw-voter represents these voters as

s/FW/firmware

> +child devices of the corresponding qcom,devfreq-fw device.
> +
> +Required properties:
> +- compatible: Must be "qcom,devfreq-fw" or "qcom,devfreq-fw-voter"

The use of 'devfreq' word is not proper because 'devfreq' is framework name.
I think you have to use the specific SoC name for the compatible. In the future,
if you need to support the new SoC with this driver, just you can add the new compatible.

> +Only for qcom,devfreq-fw:
> +- reg: Pairs of physical base addresses and region sizes of
> + memory mapped registers.
> +- reg-names: Names of the bases for the above registers. Expected
> + bases are: "en-base", "lut-base" and "perf-base".

It is not possible to understand what are meaning of "en-base", "lut-base" and "perf-base".
because they depend on specific H/W specification. You have to add the detailed description
why they are necessary. Also, you should explain whether thery are mandatory or optional.

> +
> +Example:
> +
> + qcom,devfreq-l3 {
> + compatible = "qcom,devfreq-fw";
> + reg-names = "en-base", "lut-base", "perf-base";
> + reg = <0x18321000 0x4>, <0x18321110 0x600>, <0x18321920 0x4>;
> +
> + qcom,cpu0-l3 {
> + compatible = "qcom,devfreq-fw-voter";
> + };
> +
> + qcom,cpu4-l3 {
> + compatible = "qcom,devfreq-fw-voter";
> + };
> + };
> diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
> index 6a172d3..8503018 100644
> --- a/drivers/devfreq/Kconfig
> +++ b/drivers/devfreq/Kconfig
> @@ -113,6 +113,20 @@ config ARM_RK3399_DMC_DEVFREQ
> It sets the frequency for the memory controller and reads the usage counts
> from hardware.
>
> +config ARM_QCOM_DEVFREQ_FW
> + bool "Qualcomm Technologies Inc. DEVFREQ FW driver"
> + depends on ARCH_QCOM
> + select DEVFREQ_GOV_PERFORMANCE
> + select DEVFREQ_GOV_POWERSAVE
> + select DEVFREQ_GOV_USERSPACE
> + default n
> + help
> + The firmware present in some QCOM chipsets offloads the steps
> + necessary for changing the frequency of some devices (Eg: L3). This
> + driver implements the devfreq interface for this firmware so that
> + various governors could be used to scale the frequency of these
> + devices.

As I commented, you need to add a description of what kind of firmwar.

> +
> source "drivers/devfreq/event/Kconfig"
>
> endif # PM_DEVFREQ
> diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile
> index 32b8d4d..f1cc8990 100644
> --- a/drivers/devfreq/Makefile
> +++ b/drivers/devfreq/Makefile
> @@ -11,6 +11,7 @@ obj-$(CONFIG_DEVFREQ_GOV_PASSIVE) += governor_passive.o
> obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ) += exynos-bus.o
> obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ) += rk3399_dmc.o
> obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra-devfreq.o
> +obj-$(CONFIG_ARM_QCOM_DEVFREQ_FW) += devfreq_qcom_fw.o
>
> # DEVFREQ Event Drivers
> obj-$(CONFIG_PM_DEVFREQ_EVENT) += event/
> diff --git a/drivers/devfreq/devfreq_qcom_fw.c b/drivers/devfreq/devfreq_qcom_fw.c
> new file mode 100644
> index 0000000..3e85f76
> --- /dev/null
> +++ b/drivers/devfreq/devfreq_qcom_fw.c
> @@ -0,0 +1,326 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.

Is it right? or Qualcomm?

> + */
> +
> +#include <linux/err.h>
> +#include <linux/errno.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/list.h>
> +#include <linux/devfreq.h>
> +#include <linux/pm_opp.h>
> +
> +#define INIT_RATE 300000000UL
> +#define XO_RATE 19200000UL
> +#define LUT_MAX_ENTRIES 40U
> +#define LUT_ROW_SIZE 32

I don't know what are the meaning of 'XO', 'LUT'.

> +
> +struct devfreq_qcom_fw {
> + void __iomem *perf_base;
> + struct devfreq_dev_profile dp;
> + struct list_head ;
> + struct list_head voter;
> + unsigned int index;
> +};
> +
> +static DEFINE_SPINLOCK(voter_lock);
> +
> +static int devfreq_qcom_fw_target(struct device *dev, unsigned long *freq,
> + u32 flags)
> +{
> + struct devfreq_qcom_fw *d = dev_get_drvdata(dev), *pd, *v;
> + struct devfreq_dev_profile *p = &d->dp;
> + unsigned int index;
> + unsigned long lflags;
> + struct dev_pm_opp *opp;
> + void __iomem *perf_base = d->perf_base;
> +
> + opp = devfreq_recommended_opp(dev, freq, flags);
> + if (!IS_ERR(opp))
> + dev_pm_opp_put(opp);
> + else
> + return PTR_ERR(opp);
> +
> + for (index = 0; index < p->max_state; index++)
> + if (p->freq_table[index] == *freq)
> + break;
> +
> + if (index >= p->max_state) {
> + dev_err(dev, "Unable to find index for freq (%lu)!\n", *freq);
> + return -EINVAL;
> + }
> +
> + d->index = index;
> +
> + spin_lock_irqsave(&voter_lock, lflags);
> + /* Voter */
> + if (!perf_base) {
> + pd = dev_get_drvdata(dev->parent);
> + list_for_each_entry(v, &pd->voters, voter)
> + index = max(index, v->index);
> + perf_base = pd->perf_base;
> + }
> +
> + writel_relaxed(index, perf_base);
> + spin_unlock_irqrestore(&voter_lock, lflags);
> +
> + return 0;
> +}
> +
> +static int devfreq_qcom_fw_get_cur_freq(struct device *dev,
> + unsigned long *freq)
> +{
> + struct devfreq_qcom_fw *d = dev_get_drvdata(dev);
> + struct devfreq_dev_profile *p = &d->dp;
> + unsigned int index;
> +
> + /* Voter */
> + if (!d->perf_base) {
> + index = d->index;
> + } else {
> + index = readl_relaxed(d->perf_base);
> + index = min(index, p->max_state - 1);
> + }
> + *freq = p->freq_table[index];
> +
> + return 0;
> +}
> +
> +static int devfreq_qcom_populate_opp(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + u32 data, src, lval, i;
> + unsigned long freq, prev_freq;
> + struct resource *res;
> + void __iomem *lut_base;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "lut-base");
> + if (!res) {
> + dev_err(dev, "Unable to find lut-base!\n");
> + return -EINVAL;
> + }
> +
> + lut_base = devm_ioremap(dev, res->start, resource_size(res));
> + if (!lut_base) {
> + dev_err(dev, "Unable to map lut-base\n");
> + return -ENOMEM;
> + }
> +
> + for (i = 0; i < LUT_MAX_ENTRIES; i++) {
> + data = readl_relaxed(lut_base + i * LUT_ROW_SIZE);
> + src = ((data & GENMASK(31, 30)) >> 30);
> + lval = (data & GENMASK(7, 0));
> + freq = src ? XO_RATE * lval : INIT_RATE;

You need to define the global definitions such as XXX_MASK, XXX_SHIFT
for the readability. And add the role of 'lval' and why have to multiply
'lavl' to 'XO_RATE'.

> +
> + /*
> + * Two of the same frequencies with the same core counts means
> + * end of table.
> + */
> + if (i > 0 && prev_freq == freq)
> + break;
> +
> + dev_pm_opp_add(&pdev->dev, freq, 0);
> +
> + prev_freq = freq;
> + }
> +
> + devm_iounmap(dev, lut_base);
> +
> + return 0;
> +}
> +
> +static int devfreq_qcom_init_hw(struct platform_device *pdev)
> +{
> + struct devfreq_qcom_fw *d;
> + struct resource *res;
> + struct device *dev = &pdev->dev;
> + int ret = 0;
> + void __iomem *en_base;
> +
> + d = devm_kzalloc(dev, sizeof(*d), GFP_KERNEL);
> + if (!d)
> + return -ENOMEM;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "en-base");
> + if (!res) {
> + dev_err(dev, "Unable to find en-base!\n");
> + return -EINVAL;
> + }
> +
> + en_base = devm_ioremap(dev, res->start, resource_size(res));
> + if (!en_base) {
> + dev_err(dev, "Unable to map en-base\n");
> + return -ENOMEM;
> + }
> +
> + /* FW should be enabled state to proceed */
> + if (!(readl_relaxed(en_base) & 1)) {
> + dev_err(dev, "FW not enabled\n");
> + return -ENODEV;
> + }
> +
> + devm_iounmap(dev, en_base);
> +
> + ret = devfreq_qcom_populate_opp(pdev);
> + if (ret) {
> + dev_err(dev, "Failed to read LUT\n");
> + return ret;
> + }
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "perf-base");
> + if (!res) {
> + dev_err(dev, "Unable to find perf-base!\n");
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + d->perf_base = devm_ioremap(dev, res->start, resource_size(res));
> + if (!d->perf_base) {
> + dev_err(dev, "Unable to map perf-base\n");
> + ret = -ENOMEM;
> + goto out;
> + }
> +
> + INIT_LIST_HEAD(&d->voters);
> + dev_set_drvdata(dev, d);
> +
> +out:
> + if (ret)
> + dev_pm_opp_remove_table(dev);
> + return ret;
> +}
> +
> +static int devfreq_qcom_copy_opp(struct device *src_dev, struct device *dst_dev)
> +{
> + unsigned long freq;
> + int i, cnt, ret = 0;
> + struct dev_pm_opp *opp;
> +
> + if (!src_dev)
> + return -ENODEV;
> +
> + cnt = dev_pm_opp_get_opp_count(src_dev);
> + if (!cnt)
> + return -EINVAL;
> +
> + for (i = 0, freq = 0; i < cnt; i++, freq++) {
> + opp = dev_pm_opp_find_freq_ceil(src_dev, &freq);
> + if (IS_ERR(opp)) {
> + ret = -EINVAL;
> + break;
> + }
> + dev_pm_opp_put(opp);
> +
> + ret = dev_pm_opp_add(dst_dev, freq, 0);
> + if (ret)
> + break;
> + }
> +
> + if (ret)
> + dev_pm_opp_remove_table(dst_dev);
> + return ret;
> +}
> +
> +static int devfreq_qcom_init_voter(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device *par_dev = dev->parent;
> + struct devfreq_qcom_fw *d, *pd = dev_get_drvdata(par_dev);
> + int ret = 0;
> +
> + d = devm_kzalloc(dev, sizeof(*d), GFP_KERNEL);
> + if (!d)
> + return -ENOMEM;
> +
> + ret = devfreq_qcom_copy_opp(dev->parent, dev);
> + if (ret) {
> + dev_err(dev, "Failed to copy parent OPPs\n");
> + return ret;
> + }
> +
> + list_add(&d->voter, &pd->voters);
> + dev_set_drvdata(dev, d);
> +
> + return 0;
> +}
> +
> +static int devfreq_qcom_fw_driver_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + int ret = 0;
> + struct devfreq_qcom_fw *d;
> + struct devfreq_dev_profile *p;
> + struct devfreq *df;
> +
> + if (!of_device_get_match_data(dev))
> + ret = devfreq_qcom_init_voter(pdev);
> + else
> + ret = devfreq_qcom_init_hw(pdev);
> + if (ret) {
> + dev_err(dev, "Unable to probe device!\n");
> + return ret;
> + }
> +
> + /*
> + * If device has voter children, do no register directly with devfreq
> + */
> + if (of_get_available_child_count(dev->of_node)) {
> + of_platform_populate(dev->of_node, NULL, NULL, dev);
> + dev_info(dev, "Devfreq QCOM FW parent device initialized.\n");
> + return 0;
> + }
> +
> + d = dev_get_drvdata(dev);
> + p = &d->dp;
> + p->polling_ms = 50;
> + p->target = devfreq_qcom_fw_target;
> + p->get_cur_freq = devfreq_qcom_fw_get_cur_freq;
> +
> + df = devm_devfreq_add_device(dev, p, "performance", NULL);
> + if (IS_ERR(df)) {
> + dev_err(dev, "Unable to register Devfreq QCOM FW device!\n");
> + return PTR_ERR(df);
> + }
> +
> + dev_info(dev, "Devfreq QCOM FW device registered.\n");
> +
> + return 0;
> +}
> +
> +static const struct of_device_id match_table[] = {
> + { .compatible = "qcom,devfreq-fw", .data = (void *) 1 },
> + { .compatible = "qcom,devfreq-fw-voter", .data = (void *) 0 },
> + {}
> +};
> +
> +static struct platform_driver devfreq_qcom_fw_driver = {
> + .probe = devfreq_qcom_fw_driver_probe,
> + .driver = {
> + .name = "devfreq-qcom-fw",
> + .of_match_table = match_table,
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init devfreq_qcom_fw_init(void)
> +{
> + return platform_driver_register(&devfreq_qcom_fw_driver);
> +}
> +subsys_initcall(devfreq_qcom_fw_init);
> +
> +static void __exit devfreq_qcom_fw_exit(void)
> +{
> + platform_driver_unregister(&devfreq_qcom_fw_driver);
> +}
> +module_exit(devfreq_qcom_fw_exit);
> +
> +MODULE_DESCRIPTION("Devfreq QCOM FW");
> +MODULE_LICENSE("GPL v2");
>


--
Best Regards,
Chanwoo Choi
Samsung Electronics

\
 
 \ /
  Last update: 2018-05-18 04:28    [W:0.744 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site