lkml.org 
[lkml]   [2018]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v16 8/9] PCI/DPC: Unify and plumb error handling into DPC
On 2018-05-16 16:22, Bjorn Helgaas wrote:
> On Wed, May 16, 2018 at 01:46:25PM +0530, poza@codeaurora.org wrote:
>> On 2018-05-16 05:26, Bjorn Helgaas wrote:
>> > On Fri, May 11, 2018 at 05:22:08PM +0530, poza@codeaurora.org wrote:
>> > > On 2018-05-11 16:13, Oza Pawandeep wrote:
>> > > > DPC driver implements link_reset callback, and calls
>> > > > pci_do_fatal_recovery().
>> > > >
>> > > > Which follows standard path of ERR_FATAL recovery.
>> > > >
>> > > > Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
>> > > >
>> > > > diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
>> > > > index 5e8857a..6af7595 100644
>> > > > --- a/drivers/pci/pci.h
>> > > > +++ b/drivers/pci/pci.h
>> > > > @@ -354,7 +354,7 @@ static inline resource_size_t
>> > > > pci_resource_alignment(struct pci_dev *dev,
>> > > > void pci_enable_acs(struct pci_dev *dev);
>> > > >
>> > > > /* PCI error reporting and recovery */
>> > > > -void pcie_do_fatal_recovery(struct pci_dev *dev);
>> > > > +void pcie_do_fatal_recovery(struct pci_dev *dev, u32 service);
>> > > > void pcie_do_nonfatal_recovery(struct pci_dev *dev);
>> > > >
>> > > > bool pcie_wait_for_link(struct pci_dev *pdev, bool active);
>> > > > diff --git a/drivers/pci/pcie/aer/aerdrv_core.c
>> > > > b/drivers/pci/pcie/aer/aerdrv_core.c
>> > > > index fdfc474..36e622d 100644
>> > > > --- a/drivers/pci/pcie/aer/aerdrv_core.c
>> > > > +++ b/drivers/pci/pcie/aer/aerdrv_core.c
>> > > > @@ -254,7 +254,7 @@ static void handle_error_source(struct pcie_device
>> > > > *aerdev,
>> > > > } else if (info->severity == AER_NONFATAL)
>> > > > pcie_do_nonfatal_recovery(dev);
>> > > > else if (info->severity == AER_FATAL)
>> > > > - pcie_do_fatal_recovery(dev);
>> > > > + pcie_do_fatal_recovery(dev, PCIE_PORT_SERVICE_AER);
>> > > > }
>> > > >
>> > > > #ifdef CONFIG_ACPI_APEI_PCIEAER
>> > > > @@ -321,7 +321,7 @@ static void aer_recover_work_func(struct work_struct
>> > > > *work)
>> > > > if (entry.severity == AER_NONFATAL)
>> > > > pcie_do_nonfatal_recovery(pdev);
>> > > > else if (entry.severity == AER_FATAL)
>> > > > - pcie_do_fatal_recovery(pdev);
>> > > > + pcie_do_fatal_recovery(pdev, PCIE_PORT_SERVICE_AER);
>> > > > pci_dev_put(pdev);
>> > > > }
>> > > > }
>> > > > diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
>> > > > index 80ec384..5680c13 100644
>> > > > --- a/drivers/pci/pcie/dpc.c
>> > > > +++ b/drivers/pci/pcie/dpc.c
>> > > > @@ -73,29 +73,31 @@ static void dpc_wait_link_inactive(struct dpc_dev
>> > > > *dpc)
>> > > > pcie_wait_for_link(pdev, false);
>> > > > }
>> > > >
>> > > > -static void dpc_work(struct work_struct *work)
>> > > > +static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
>> > > > {
>> > > > - struct dpc_dev *dpc = container_of(work, struct dpc_dev, work);
>> > > > - struct pci_dev *dev, *temp, *pdev = dpc->dev->port;
>> > > > - struct pci_bus *parent = pdev->subordinate;
>> > > > - u16 cap = dpc->cap_pos, ctl;
>> > > > -
>> > > > - pci_lock_rescan_remove();
>> > > > - list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
>> > > > - bus_list) {
>> > > > - pci_dev_get(dev);
>> > > > - pci_dev_set_disconnected(dev, NULL);
>> > > > - if (pci_has_subordinate(dev))
>> > > > - pci_walk_bus(dev->subordinate,
>> > > > - pci_dev_set_disconnected, NULL);
>> > > > - pci_stop_and_remove_bus_device(dev);
>> > > > - pci_dev_put(dev);
>> > > > - }
>> > > > - pci_unlock_rescan_remove();
>> > > > -
>> > > > + struct dpc_dev *dpc;
>> > > > + struct pcie_device *pciedev;
>> > > > + struct device *devdpc;
>> > > > + u16 cap, ctl;
>> > > > +
>> > > > + /*
>> > > > + * DPC disables the Link automatically in hardware, so it has
>> > > > + * already been reset by the time we get here.
>> > > > + */
>> > > > +
>> > > > + devdpc = pcie_port_find_device(pdev, PCIE_PORT_SERVICE_DPC);
>> > > > + pciedev = to_pcie_device(devdpc);
>> > > > + dpc = get_service_data(pciedev);
>> > > > + cap = dpc->cap_pos;
>> > > > +
>> > > > + /*
>> > > > + * Waiting until the link is inactive, then clearing DPC
>> > > > + * trigger status to allow the port to leave DPC.
>> > > > + */
>> > > > dpc_wait_link_inactive(dpc);
>> > > > +
>> > > > if (dpc->rp_extensions && dpc_wait_rp_inactive(dpc))
>> > > > - return;
>> > > > + return PCI_ERS_RESULT_DISCONNECT;
>> > > > if (dpc->rp_extensions && dpc->rp_pio_status) {
>> > > > pci_write_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_STATUS,
>> > > > dpc->rp_pio_status);
>> > > > @@ -108,6 +110,17 @@ static void dpc_work(struct work_struct *work)
>> > > > pci_read_config_word(pdev, cap + PCI_EXP_DPC_CTL, &ctl);
>> > > > pci_write_config_word(pdev, cap + PCI_EXP_DPC_CTL,
>> > > > ctl | PCI_EXP_DPC_CTL_INT_EN);
>> > > > +
>> > > > + return PCI_ERS_RESULT_RECOVERED;
>> > > > +}
>> > > > +
>> > > > +static void dpc_work(struct work_struct *work)
>> > > > +{
>> > > > + struct dpc_dev *dpc = container_of(work, struct dpc_dev, work);
>> > > > + struct pci_dev *pdev = dpc->dev->port;
>> > > > +
>> > > > + /* From DPC point of view error is always FATAL. */
>> > > > + pcie_do_fatal_recovery(pdev, PCIE_PORT_SERVICE_DPC);
>> > > > }
>> > > >
>> > > > static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
>> > > > @@ -288,6 +301,7 @@ static struct pcie_port_service_driver dpcdriver = {
>> > > > .service = PCIE_PORT_SERVICE_DPC,
>> > > > .probe = dpc_probe,
>> > > > .remove = dpc_remove,
>> > > > + .reset_link = dpc_reset_link,
>> > > > };
>> > > >
>> > > > static int __init dpc_service_init(void)
>> > > > diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
>> > > > index 33a16b1..29ff148 100644
>> > > > --- a/drivers/pci/pcie/err.c
>> > > > +++ b/drivers/pci/pcie/err.c
>> > > > @@ -185,7 +185,7 @@ static pci_ers_result_t default_reset_link(struct
>> > > > pci_dev *dev)
>> > > > return PCI_ERS_RESULT_RECOVERED;
>> > > > }
>> > > >
>> > > > -static pci_ers_result_t reset_link(struct pci_dev *dev)
>> > > > +static pci_ers_result_t reset_link(struct pci_dev *dev, u32 service)
>> > > > {
>> > > > struct pci_dev *udev;
>> > > > pci_ers_result_t status;
>> > > > @@ -200,7 +200,7 @@ static pci_ers_result_t reset_link(struct pci_dev
>> > > > *dev)
>> > > > }
>> > > >
>> > > > /* Use the aer driver of the component firstly */
>> > > > - driver = pcie_port_find_service(udev, PCIE_PORT_SERVICE_AER);
>> > > > + driver = pcie_port_find_service(udev, service);
>> > > >
>> > > > if (driver && driver->reset_link) {
>> > > > status = driver->reset_link(udev);
>> > > > @@ -287,7 +287,7 @@ static pci_ers_result_t
>> > > > broadcast_error_message(struct pci_dev *dev,
>> > > > * followed by re-enumeration of devices.
>> > > > */
>> > > >
>> > > > -void pcie_do_fatal_recovery(struct pci_dev *dev)
>> > > > +void pcie_do_fatal_recovery(struct pci_dev *dev, u32 service)
>> > > > {
>> > > > struct pci_dev *udev;
>> > > > struct pci_bus *parent;
>> > > > @@ -313,7 +313,7 @@ void pcie_do_fatal_recovery(struct pci_dev *dev)
>> > > > pci_dev_put(pdev);
>> > > > }
>> > > >
>> > > > - result = reset_link(udev);
>> > > > + result = reset_link(udev, service);
>> > > >
>> > > > if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
>> > > > /*
>> > > > diff --git a/include/linux/aer.h b/include/linux/aer.h
>> > > > index 8f87bbe..0c506fe 100644
>> > > > --- a/include/linux/aer.h
>> > > > +++ b/include/linux/aer.h
>> > > > @@ -14,6 +14,7 @@
>> > > > #define AER_NONFATAL 0
>> > > > #define AER_FATAL 1
>> > > > #define AER_CORRECTABLE 2
>> > > > +#define DPC_FATAL 4
>> >
>> > I think DPC_FATAL can be 3, since these values are not used as a bit
>> > mask.
>> >
>> > > > struct pci_dev;
>> > >
>> > >
>> > > Hi Bjorn,
>> > >
>> > >
>> > > I have addressed all the comments, and I hope we are heading towards
>> > > closure.
>> > >
>> > > I just figure that pcie_do_fatal_recovery (which is getting
>> > > executed for
>> > > DPC as well)
>> > >
>> > > if (result == PCI_ERS_RESULT_RECOVERED) {
>> > > if (pcie_wait_for_link(udev, true))
>> > > pci_rescan_bus(udev->bus);
>> > > pci_info(dev, "Device recovery successful\n");
>> > > }
>> > >
>> > > I have to correct it to
>> > >
>> > > if (service==AER && result == PCI_ERS_RESULT_RECOVERED) {
>> > > if (pcie_wait_for_link(udev, true))
>> > > pci_rescan_bus(udev->bus);
>> > > pci_info(dev, "Device recovery successful\n");
>> > > }
>> >
>> > This patch is mostly a restructuring of DPC and doesn't really change
>> > its
>> > behavior. DPC didn't previously call pcie_wait_for_link() or
>> > pci_rescan_bus(), so I agree that adding the "service==AER" test will
>> > help preserve the existing DPC behavior.
>> >
>> > However, the rescan should happen with DPC *somewhere* and we should
>> > clarify where that is. Maybe for now we only need a comment about where
>> > that happens. Ideally, we could eventually converge this so the same
>> > mechanism is used for AER and DPC, so we wouldn't need a test like
>> > "service=AER".
>
> Please still add a comment here about why the rescan behavior is
> different.
>
>> I am sorry I pasted the wrong snippet.
>> following needs to be fixed in v17.
>> from:
>> if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
>> /*
>> * If the error is reported by a bridge, we think this
>> error
>> * is related to the downstream link of the bridge, so
>> we
>> * do error recovery on all subordinates of the bridge
>> instead
>> * of the bridge and clear the error status of the
>> bridge.
>> */
>> pci_walk_bus(dev->subordinate, report_resume,
>> &result_data);
>> pci_cleanup_aer_uncorrect_error_status(dev);
>> }
>>
>>
>> to
>>
>> if (service==AER && dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
>> /*
>> * If the error is reported by a bridge, we think this
>> error
>> * is related to the downstream link of the bridge, so
>> we
>> * do error recovery on all subordinates of the bridge
>> instead
>> * of the bridge and clear the error status of the
>> bridge.
>> */
>> pci_walk_bus(dev->subordinate, report_resume,
>> &result_data);
>> pci_cleanup_aer_uncorrect_error_status(dev);
>> }
>>
>> this is only needed in case of AER.
>
> Oh, I missed this before. It makes sense to clear the AER status
> here, but why do we need to call report_resume()? We just called all
> the driver .remove() methods and detached the drivers from the
> devices. So I don't think report_resume() will do anything
> ("dev->driver" should be NULL) except set the dev->error_state to
> pci_channel_io_normal. We probably don't need that because we didn't
> change error_state in this fatal error path.
>

if you remember, the path ends up calling
aer_error_resume

the existing code ends up calling aer_error_resume as follows.

do_recovery(pci_dev)
broadcast_error_message(..., error_detected, ...)
if (AER_FATAL)
reset_link(pci_dev)
udev = BRIDGE ? pci_dev : pci_dev->bus->self
driver->reset_link(udev)
aer_root_reset(udev)
if (CAN_RECOVER)
broadcast_error_message(..., mmio_enabled, ...)
if (NEED_RESET)
broadcast_error_message(..., slot_reset, ...)
broadcast_error_message(dev, ..., report_resume, ...)
if (BRIDGE)
report_resume
driver->resume
pcie_portdrv_err_resume
device_for_each_child(..., resume_iter)
resume_iter
driver->error_resume
aer_error_resume
pci_cleanup_aer_uncorrect_error_status(pci_dev) # only if
BRIDGE
pci_write_config_dword(PCI_ERR_UNCOR_STATUS)

hence I think we have to call it in order to clear the root port
PCI_ERR_UNCOR_STATUS and PCI_EXP_DEVSTA.
makes sense ?

Regards,
Oza.


>> by the way I can not find pci/oza-v16 branch when I cloned
>> git clone
>> https://kernel.googlesource.com/pub/scm/linux/kernel/git/helgaas/pci
>
> Sorry, I must have forgotten to push it. It's there now at
>
>
> https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/log/?h=pci/oza-v16
>
> I don't know anything about the googlesource mirror, so I don't know
> when it will get there.

\
 
 \ /
  Last update: 2018-05-16 14:16    [W:0.068 / U:6.100 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site