lkml.org 
[lkml]   [2018]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: imx7d: use operating-points-v2 for cpu
Date
This patch uses "operating-points-v2" instead of
"operating-points" to be more fit with cpufreq-dt
driver.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
arch/arm/boot/dts/imx7d.dtsi | 24 +++++++++++++++++++-----
1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 4c9877e..28980c8 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -9,12 +9,8 @@
/ {
cpus {
cpu0: cpu@0 {
- operating-points = <
- /* KHz uV */
- 996000 1075000
- 792000 975000
- >;
clock-frequency = <996000000>;
+ operating-points-v2 = <&cpu0_opp_table>;
};

cpu1: cpu@1 {
@@ -22,6 +18,24 @@
device_type = "cpu";
reg = <1>;
clock-frequency = <996000000>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+ };
+
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-792000000 {
+ opp-hz = /bits/ 64 <792000000>;
+ opp-microvolt = <975000>;
+ clock-latency-ns = <150000>;
+ };
+ opp-996000000 {
+ opp-hz = /bits/ 64 <996000000>;
+ opp-microvolt = <1075000>;
+ clock-latency-ns = <150000>;
+ opp-suspend;
};
};

--
2.7.4
\
 
 \ /
  Last update: 2018-05-16 06:52    [W:0.055 / U:0.960 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site