lkml.org 
[lkml]   [2018]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] mmc: sdhci-pxav3: don't disable clocks when we might get an interrupt
From
Date
Hi,

On 05/15/2018 01:59 AM, Adrian Hunter wrote:
> On 15/05/18 00:56, Thomas Hebb wrote:
>> Currently, runtime_suspend() unconditionally disables the clock gates
>> for the controller, which means that it's unable to receive interrupts
>> generated by connected SDIO cards.
>
> We currently get / put runtime pm with enable / disable of the SDIO IRQ
> (refer sdhci_enable_sdio_irq()) so are you sure this is needed?

You're correct; this patch is unnecessary. I wrote it before
923713b35745 ("mmc: sdhci: Disable runtime pm when the sdio_irq is
enabled"), and it was needed then. Sorry for the noise.

FYI, sdhci-esdhc-imx still checks the IRQ in its suspend/resume
functions. That's one of the things that misled me to think this patch
was still relevant.

>>
>> Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
>> ---
>> drivers/mmc/host/sdhci-pxav3.c | 16 ++++++++++------
>> 1 file changed, 10 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
>> index a34434166ca7..59760f3cc1d7 100644
>> --- a/drivers/mmc/host/sdhci-pxav3.c
>> +++ b/drivers/mmc/host/sdhci-pxav3.c
>> @@ -562,9 +562,11 @@ static int sdhci_pxav3_runtime_suspend(struct device *dev)
>> if (host->tuning_mode != SDHCI_TUNING_MODE_3)
>> mmc_retune_needed(host->mmc);
>>
>> - clk_disable_unprepare(pxa->clk_io);
>> - if (!IS_ERR(pxa->clk_core))
>> - clk_disable_unprepare(pxa->clk_core);
>> + if (!sdhci_sdio_irq_enabled(host)) {
>> + clk_disable_unprepare(pxa->clk_io);
>> + if (!IS_ERR(pxa->clk_core))
>> + clk_disable_unprepare(pxa->clk_core);
>> + }
>>
>> return 0;
>> }
>> @@ -575,9 +577,11 @@ static int sdhci_pxav3_runtime_resume(struct device *dev)
>> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>> struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
>>
>> - clk_prepare_enable(pxa->clk_io);
>> - if (!IS_ERR(pxa->clk_core))
>> - clk_prepare_enable(pxa->clk_core);
>> + if (!sdhci_sdio_irq_enabled(host)) {
>> + clk_prepare_enable(pxa->clk_io);
>> + if (!IS_ERR(pxa->clk_core))
>> + clk_prepare_enable(pxa->clk_core);
>> + }
>>
>> return sdhci_runtime_resume_host(host);
>> }
>>
>

\
 
 \ /
  Last update: 2018-05-15 08:19    [W:0.056 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site