lkml.org 
[lkml]   [2018]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH 5/5] media: platform: Add Chrome OS EC CEC driver
From
Date
On 15/05/2018 10:10, Hans Verkuil wrote:
> On 05/15/18 09:25, Neil Armstrong wrote:
>> Hi Hans,
>>
>> Thanks for the extensive review.
>>
>> On 15/05/2018 08:58, Hans Verkuil wrote:
>>> On 05/15/2018 12:40 AM, Neil Armstrong wrote:
>>>> The Chrome OS Embedded Controller can expose a CEC bus, this patch add the
>>>> driver for such feature of the Embedded Controller.
>>>>
>>>> This driver is part of the cros-ec MFD and will be add as a sub-device when
>>>> the feature bit is exposed by the EC.
>>>>
>>>> The controller will only handle a single logical address and handles
>>>> all the messages retries and will only expose Success or Error.
>>>>
>>>> When the logical address is invalid, the controller will act as a CEC sniffer
>>>> and transfer all messages on the bus.
>>>
>>> I did not see any support for this. If this works as you state here, then adding
>>> support for CEC_CAP_MONITOR_ALL is highly recommended.
>>
>> Oops, I forgot to remove this phrase, the FW will maybe support it, but it has been
>> dropped for the first revision.
>>
>>>
>>>>
>>>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>>>> ---
>>>> drivers/media/platform/Kconfig | 11 +
>>>> drivers/media/platform/Makefile | 2 +
>>>> drivers/media/platform/cros-ec/Makefile | 1 +
>>>> drivers/media/platform/cros-ec/cros-ec-cec.c | 331 +++++++++++++++++++++++++++
>>>> 4 files changed, 345 insertions(+)
>>>> create mode 100644 drivers/media/platform/cros-ec/Makefile
>>>> create mode 100644 drivers/media/platform/cros-ec/cros-ec-cec.c
>>>
>>> Shouldn't the directory be called cros-ec-cec?

Forgot this one, moved to cros-ec-cec directory.

>>>
>>>>
>>>> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
>>>> index c7a1cf8..e55a8ed2 100644
>>>> --- a/drivers/media/platform/Kconfig
>>>> +++ b/drivers/media/platform/Kconfig
>>>> @@ -546,6 +546,17 @@ menuconfig CEC_PLATFORM_DRIVERS
>>>>
>>>> if CEC_PLATFORM_DRIVERS
>>>>
>>>> +config VIDEO_CROS_EC_CEC
>>>> + tristate "Chrome OS EC CEC driver"
>>>> + depends on MFD_CROS_EC || COMPILE_TEST
>>>> + select CEC_CORE
>>>> + select CEC_NOTIFIER
>>>> + ---help---
>>>> + If you say yes here you will get support for the
>>>> + Chrome OS Embedded Controller's CEC.
>>>> + The CEC bus is present in the HDMI connector and enables communication
>>>> + between compatible devices.
>>>> +
>>>> config VIDEO_MESON_AO_CEC
>>>> tristate "Amlogic Meson AO CEC driver"
>>>> depends on ARCH_MESON || COMPILE_TEST
>>>> diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
>>>> index 932515d..0e0582e 100644
>>>> --- a/drivers/media/platform/Makefile
>>>> +++ b/drivers/media/platform/Makefile
>>>> @@ -92,3 +92,5 @@ obj-$(CONFIG_VIDEO_QCOM_CAMSS) += qcom/camss-8x16/
>>>> obj-$(CONFIG_VIDEO_QCOM_VENUS) += qcom/venus/
>>>>
>>>> obj-y += meson/
>>>> +
>>>> +obj-y += cros-ec/
>>>> diff --git a/drivers/media/platform/cros-ec/Makefile b/drivers/media/platform/cros-ec/Makefile
>>>> new file mode 100644
>>>> index 0000000..9ce97f9
>>>> --- /dev/null
>>>> +++ b/drivers/media/platform/cros-ec/Makefile
>>>> @@ -0,0 +1 @@
>>>> +obj-$(CONFIG_VIDEO_CROS_EC_CEC) += cros-ec-cec.o
>>>> diff --git a/drivers/media/platform/cros-ec/cros-ec-cec.c b/drivers/media/platform/cros-ec/cros-ec-cec.c
>>>> new file mode 100644
>>>> index 0000000..fea90da
>>>> --- /dev/null
>>>> +++ b/drivers/media/platform/cros-ec/cros-ec-cec.c
>>>> @@ -0,0 +1,331 @@
>>>> +// SPDX-License-Identifier: GPL-2.0+
>>>> +/*
>>>> + * CEC driver for Chrome OS Embedded Controller
>>>> + *
>>>> + * Copyright (c) 2018 BayLibre, SAS
>>>> + * Author: Neil Armstrong <narmstrong@baylibre.com>
>>>> + */
>>>> +
>>>> +#include <linux/kernel.h>
>>>> +#include <linux/module.h>
>>>> +#include <linux/platform_device.h>
>>>> +#include <linux/dmi.h>
>>>> +#include <linux/cec.h>
>>>> +#include <linux/slab.h>
>>>> +#include <linux/interrupt.h>
>>>> +#include <media/cec.h>
>>>> +#include <media/cec-notifier.h>
>>>> +#include <linux/mfd/cros_ec.h>
>>>> +#include <linux/mfd/cros_ec_commands.h>
>>>> +
>>>> +#define DRV_NAME "cros-ec-cec"
>>>> +
>>>> +/**
>>>> + * struct cros_ec_cec - Driver data for EC CEC
>>>> + *
>>>> + * @cros_ec: Pointer to EC device
>>>> + * @notifier: Notifier info for responding to EC events
>>>> + * @adap: CEC adapter
>>>> + * @notify: CEC notifier pointer
>>>> + * @rc_msg: storage for a received message
>>>> + */
>>>> +struct cros_ec_cec {
>>>> + struct cros_ec_device *cros_ec;
>>>> + struct notifier_block notifier;
>>>> + struct cec_adapter *adap;
>>>> + struct cec_notifier *notify;
>>>> + struct cec_msg rx_msg;
>>>> +};
>>>> +
>>>> +static void handle_cec_message(struct cros_ec_cec *cros_ec_cec)
>>>> +{
>>>> + struct cros_ec_device *cros_ec = cros_ec_cec->cros_ec;
>>>> + uint8_t *cec_message = cros_ec->event_data.data.cec_message;
>>>> + unsigned int len = cros_ec->event_size;
>>>> +
>>>> + cros_ec_cec->rx_msg.len = len;
>>>
>>> How robust is the underlying code and hardware? What happens if a
>>> CEC message with more than 16 bytes is received?
>>>
>>> Hard to test unless you have an RPi3 set up as a CEC debugger. See
>>> last section in https://hverkuil.home.xs4all.nl/cec-status.txt.
>>>
>>> Since you worked with CEC for a while now I recommend you set up such
>>> a system. It's cheap and very useful.
>>
>> I will definitely setup this kind of system, I tried using am Amlogic SoC, but it really can't monitor the bus....
>>
>> But I also have an ST STM32F0 Development board with double HDMI connector to develop CEC, I'll maybe try to use it for that purpose.
>
> You really want a setup that uses the cec-gpio driver since that allows
> you to do CEC error injection. If you can hook up the CEC pin to a GPIO
> on the stm32 board, than that should work just as well as with the RPi3.
>
>>
>>>
>>>> + memcpy(cros_ec_cec->rx_msg.msg, cec_message, len);
>>>> +
>>>> + cec_received_msg(cros_ec_cec->adap, &cros_ec_cec->rx_msg);
>>>> +}
>>>> +
>>>> +static void handle_cec_event(struct cros_ec_cec *cros_ec_cec)
>>>> +{
>>>> + struct cros_ec_device *cros_ec = cros_ec_cec->cros_ec;
>>>> + uint32_t events = cros_ec->event_data.data.cec_events;
>>>> +
>>>> + if (events & EC_MKBP_CEC_SEND_OK)
>>>> + cec_transmit_attempt_done(cros_ec_cec->adap,
>>>> + CEC_TX_STATUS_OK);
>>>> +
>>>> + if (events & EC_MKBP_CEC_SEND_FAILED)
>>>> + cec_transmit_attempt_done(cros_ec_cec->adap,
>>>> + CEC_TX_STATUS_ERROR);
>>>
>>> You said above that the HW takes care of all the message retries.
>>> If that's the case, then you need to use cec_transmit_done here
>>> and pass in status CEC_TX_STATUS_MAX_RETRIES | CEC_TX_STATUS_NACK.
>>> The MAX_RETRIES flag tells the cec core that it shouldn't attempt
>>> to retry the message because the HW already did that.
>>>
>>> NACK is better than ERROR if the hardware supports only an OK/FAIL
>>> result.
>>
>> Ok, we were unsure about this, thanks for the clarification.
>>
>>>
>>>> +}
>>>> +
>>>> +static int cros_ec_cec_event(struct notifier_block *nb,
>>>> + unsigned long queued_during_suspend, void *_notify)
>>>> +{
>>>> + struct cros_ec_cec *cros_ec_cec;
>>>> + struct cros_ec_device *cros_ec;
>>>> +
>>>> + cros_ec_cec = container_of(nb, struct cros_ec_cec, notifier);
>>>> + cros_ec = cros_ec_cec->cros_ec;
>>>> +
>>>> + if (cros_ec->event_data.event_type == EC_MKBP_CEC_EVENT) {
>>>> + handle_cec_event(cros_ec_cec);
>>>> + return NOTIFY_OK;
>>>> + }
>>>> +
>>>> + if (cros_ec->event_data.event_type == EC_MKBP_EVENT_CEC_MESSAGE) {
>>>> + handle_cec_message(cros_ec_cec);
>>>> + return NOTIFY_OK;
>>>> + }
>>>> +
>>>> + return NOTIFY_DONE;
>>>> +}
>>>> +
>>>> +static int cros_ec_cec_set_log_addr(struct cec_adapter *adap, u8 logical_addr)
>>>> +{
>>>> + struct cros_ec_cec *cros_ec_cec = adap->priv;
>>>> + struct cros_ec_device *cros_ec = cros_ec_cec->cros_ec;
>>>> + struct {
>>>> + struct cros_ec_command msg;
>>>> + struct ec_params_cec_set data;
>>>> + } __packed msg;
>>>
>>> Just say: ... msg = {};
>>>
>>>> + int ret = 0;
>>>> +
>>>> + if (logical_addr == CEC_LOG_ADDR_INVALID)
>>>> + return 0;
>>>
>>> This looks weird. If I had configured a LA before, then this should unconfigure
>>> it. But it just keeps the existing LA, so any poll messages to us will still
>>> be Acked. Or am I missing something?
>
> Did you miss this comment? It's weird what is happening here.

I forgot to answer, there was a bug in the firmware, now it's fixed and we can unconfigure the LA with CEC_LOG_ADDR_INVALID.

>
>>>
>>>> +
>>>> + memset(&msg, 0, sizeof(msg));
>>>
>>> and you can drop this memset.
>>
>> I always forget this trick.
>>
>>>
>>>> + msg.msg.command = EC_CMD_CEC_SET;
>>>> + msg.msg.outsize = sizeof(msg.data);
>>>> + msg.data.cmd = CEC_CMD_LOGICAL_ADDRESS;
>>>> + msg.data.address = logical_addr;
>>>> +
>>>> + ret = cros_ec_cmd_xfer_status(cros_ec, &msg.msg);
>>>> + if (ret < 0) {
>>>> + dev_err(cros_ec->dev,
>>>> + "error setting CEC logical address on EC: %d\n", ret);
>>>> + return ret;
>>>> + }
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static int cros_ec_cec_transmit(struct cec_adapter *adap, u8 attempts,
>>>> + u32 signal_free_time, struct cec_msg *cec_msg)
>>>> +{
>>>> + struct cros_ec_cec *cros_ec_cec = adap->priv;
>>>> + struct cros_ec_device *cros_ec = cros_ec_cec->cros_ec;
>>>> + struct {
>>>> + struct cros_ec_command msg;
>>>> + struct ec_params_cec_write data;
>>>> + } __packed msg;
>>>
>>> ... msg = {};
>>>
>>>> + int ret = 0;
>>>> +
>>>> + if (cec_msg->len > MAX_CEC_MSG_LEN)
>>>> + return -EINVAL;
>>>
>>> No need, can never happen.
>>
>> Forgor to remove it, the API changed in the meantime, now it can never happen !
>>
>>>
>>>> +
>>>> + memset(&msg, 0, sizeof(msg));
>>>
>>> and drop this.
>>>
>>>> + msg.msg.command = EC_CMD_CEC_WRITE_MSG;
>>>> + msg.msg.outsize = cec_msg->len;
>>>> + memcpy(msg.data.msg, cec_msg->msg, cec_msg->len);
>>>> +
>>>> + ret = cros_ec_cmd_xfer_status(cros_ec, &msg.msg);
>>>> + if (ret < 0) {
>>>> + dev_err(cros_ec->dev,
>>>> + "error writting CEC msg on EC: %d\n", ret);
>>>> + return ret;
>>>> + }
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static int cros_ec_cec_adap_enable(struct cec_adapter *adap, bool enable)
>>>> +{
>>>> + struct cros_ec_cec *cros_ec_cec = adap->priv;
>>>> + struct cros_ec_device *cros_ec = cros_ec_cec->cros_ec;
>>>> + struct {
>>>> + struct cros_ec_command msg;
>>>> + struct ec_params_cec_set data;
>>>> + } __packed msg;
>>>> + int ret = 0;
>>>> +
>>>> + memset(&msg, 0, sizeof(msg));
>>>> + msg.msg.command = EC_CMD_CEC_SET;
>>>> + msg.msg.outsize = sizeof(msg.data);
>>>> + msg.data.cmd = CEC_CMD_ENABLE;
>>>> + msg.data.enable = enable;
>>>> +
>>>> + ret = cros_ec_cmd_xfer_status(cros_ec, &msg.msg);
>>>> + if (ret < 0) {
>>>> + dev_err(cros_ec->dev,
>>>> + "error %sabling CEC on EC: %d\n",
>>>> + (enable ? "en" : "dis"), ret);
>>>> + return ret;
>>>> + }
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static const struct cec_adap_ops cros_ec_cec_ops = {
>>>> + .adap_enable = cros_ec_cec_adap_enable,
>>>> + .adap_log_addr = cros_ec_cec_set_log_addr,
>>>> + .adap_transmit = cros_ec_cec_transmit,
>>>> +};
>>>> +
>>>> +#ifdef CONFIG_PM_SLEEP
>>>> +static int cros_ec_cec_suspend(struct device *dev)
>>>> +{
>>>> + struct platform_device *pdev = to_platform_device(dev);
>>>> + struct cros_ec_cec *cros_ec_cec = dev_get_drvdata(&pdev->dev);
>>>> +
>>>> + if (device_may_wakeup(dev))
>>>> + enable_irq_wake(cros_ec_cec->cros_ec->irq);
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static int cros_ec_cec_resume(struct device *dev)
>>>> +{
>>>> + struct platform_device *pdev = to_platform_device(dev);
>>>> + struct cros_ec_cec *cros_ec_cec = dev_get_drvdata(&pdev->dev);
>>>> +
>>>> + if (device_may_wakeup(dev))
>>>> + disable_irq_wake(cros_ec_cec->cros_ec->irq);
>>>> +
>>>> + return 0;
>>>> +}
>>>> +#endif
>>>> +
>>>> +static SIMPLE_DEV_PM_OPS(cros_ec_cec_pm_ops,
>>>> + cros_ec_cec_suspend, cros_ec_cec_resume);
>>>> +
>>>> +
>>>> +struct cec_dmi_match {
>>>> + char *sys_vendor;
>>>> + char *product_name;
>>>> + char *devname;
>>>> + char *conn;
>>>> +};
>>>> +
>>>> +static const struct cec_dmi_match cec_dmi_match_table[] = {
>>>> + /* Google Fizz */
>>>> + { "Google", "Fizz", "0000:00:02.0", "HDMI-A-1" },
>>>> +};
>>>> +
>>>> +static int cros_ec_cec_get_notifier(struct cec_notifier **notify)
>>>> +{
>>>> + int i;
>>>> +
>>>> + for (i = 0 ; i < ARRAY_SIZE(cec_dmi_match_table) ; ++i) {
>>>> + const struct cec_dmi_match *m = &cec_dmi_match_table[i];
>>>> +
>>>> + if (dmi_match(DMI_SYS_VENDOR, m->sys_vendor) &&
>>>> + dmi_match(DMI_PRODUCT_NAME, m->product_name)) {
>>>> + *notify = cec_notifier_get_byname(m->devname, m->conn);
>>>
>>> See my comments for patch 2/5.
>>
>> I will change with you comment, looks way cleaner.
>>
>>>
>>>> + return 0;
>>>> + }
>>>> + }
>>>> +
>>>> + return -EINVAL;
>>>> +}
>>>> +
>>>> +static int cros_ec_cec_probe(struct platform_device *pdev)
>>>> +{
>>>> + struct cros_ec_dev *ec_dev = dev_get_drvdata(pdev->dev.parent);
>>>> + struct cros_ec_device *cros_ec = ec_dev->ec_dev;
>>>> + struct cros_ec_cec *cros_ec_cec;
>>>> + unsigned int cec_caps = CEC_CAP_DEFAULTS;
>>>
>>> Does this need CEC_CAP_NEEDS_HPD? Can it still use CEC if there is no HPD
>>> signal?
>>
>> No, Yes, the EC FW is independent of the HPD status
>>
>>>
>>>> + int ret;
>>>> +
>>>> + cros_ec_cec = devm_kzalloc(&pdev->dev, sizeof(*cros_ec_cec),
>>>> + GFP_KERNEL);
>>>> + if (!cros_ec_cec)
>>>> + return -ENOMEM;
>>>> +
>>>> + platform_set_drvdata(pdev, cros_ec_cec);
>>>> + cros_ec_cec->cros_ec = cros_ec;
>>>> +
>>>> + ret = cros_ec_cec_get_notifier(&cros_ec_cec->notify);
>>>> + if (ret) {
>>>> + dev_warn(&pdev->dev, "no CEC notifier available\n");
>>>> + cec_caps |= CEC_CAP_PHYS_ADDR;
>>>
>>> Can this happen? What hardware has this? I am strongly opposed to CEC drivers
>>> using this capability unless there is no other option. It's a pain for userspace.
>>
>> It's in case an HW having a CEC capable FW but not in the cec_dmi_match_table, in this case
>> it won't fail but still enable the CEC interface without a notifier.
>
> I don't think that's a good idea. CAP_PHYS_ADDR should *only* be used in situations
> where it is truly impossible to tell which output is connected to the CEC adapter.
> That's the case with e.g. USB CEC dongles where you have no idea how the user
> connected the HDMI cables.
>
> But I assume that in this case it just means that the cec_dmi_match_table needs
> to be updated, i.e. it is a driver bug.

Yep, maybe a dev_warn should be added to notify this bug ?

>
> Another thing: this driver assumes that there is only one CEC adapter for only
> one HDMI output. But what if there are more HDMI outputs? Will there be one
> CEC adapter for each output? Or does the hardware have no provisions for that?

The current EC interface only exposes a single CEC interface for now, there is no
plan yet for multiple HDMI outputs handling.

>
> Something should be mentioned about this in a comment.

Ok

Thanks,
Neil

>
> Regards,
>
> Hans
>
>>
>>>
>>>> + } else if (!cros_ec_cec->notify) {
>>>> + return -EPROBE_DEFER;
>>>> + }
>>>> +
>>>> + ret = device_init_wakeup(&pdev->dev, 1);
>>>> + if (ret) {
>>>> + dev_err(&pdev->dev, "failed to initialize wakeup\n");
>>>> + return ret;
>>>> + }
>>>> +
>>>> + cros_ec_cec->adap = cec_allocate_adapter(&cros_ec_cec_ops, cros_ec_cec,
>>>> + DRV_NAME, cec_caps, 1);
>>>> + if (IS_ERR(cros_ec_cec->adap))
>>>> + return PTR_ERR(cros_ec_cec->adap);
>>>> +
>>>> + cros_ec_cec->adap->owner = THIS_MODULE;
>>>
>>> This can be dropped, cec_register_adapter() sets this already.
>>
>> Noted.
>>
>>>
>>>> +
>>>> + /* Get CEC events from the EC. */
>>>> + cros_ec_cec->notifier.notifier_call = cros_ec_cec_event;
>>>> + ret = blocking_notifier_chain_register(&cros_ec->event_notifier,
>>>> + &cros_ec_cec->notifier);
>>>> + if (ret) {
>>>> + dev_err(&pdev->dev, "failed to register notifier\n");
>>>> + cec_delete_adapter(cros_ec_cec->adap);
>>>> + return ret;
>>>> + }
>>>> +
>>>> + ret = cec_register_adapter(cros_ec_cec->adap, &pdev->dev);
>>>> + if (ret < 0) {
>>>> + cec_delete_adapter(cros_ec_cec->adap);
>>>> + return ret;
>>>> + }
>>>> +
>>>> + cec_register_cec_notifier(cros_ec_cec->adap, cros_ec_cec->notify);
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static int cros_ec_cec_remove(struct platform_device *pdev)
>>>> +{
>>>> + struct cros_ec_cec *cros_ec_cec = platform_get_drvdata(pdev);
>>>> + struct device *dev = &pdev->dev;
>>>> + int ret;
>>>> +
>>>> + ret = blocking_notifier_chain_unregister(
>>>> + &cros_ec_cec->cros_ec->event_notifier,
>>>> + &cros_ec_cec->notifier);
>>>> +
>>>> + if (ret) {
>>>> + dev_err(dev, "failed to unregister notifier\n");
>>>> + return ret;
>>>> + }
>>>> +
>>>> + cec_unregister_adapter(cros_ec_cec->adap);
>>>> +
>>>> + if (cros_ec_cec->notify)
>>>> + cec_notifier_put(cros_ec_cec->notify);
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static struct platform_driver cros_ec_cec_driver = {
>>>> + .probe = cros_ec_cec_probe,
>>>> + .remove = cros_ec_cec_remove,
>>>> + .driver = {
>>>> + .name = DRV_NAME,
>>>> + .pm = &cros_ec_cec_pm_ops,
>>>> + },
>>>> +};
>>>> +
>>>> +module_platform_driver(cros_ec_cec_driver);
>>>> +
>>>> +MODULE_DESCRIPTION("CEC driver for Chrome OS ECs");
>>>> +MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
>>>> +MODULE_LICENSE("GPL");
>>>> +MODULE_ALIAS("platform:" DRV_NAME);
>>>>
>>>
>>> Regards,
>>>
>>> Hans
>>>
>>
>> Thanks,
>> Neil
>>
>

\
 
 \ /
  Last update: 2018-05-15 10:29    [W:0.066 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site