lkml.org 
[lkml]   [2018]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/6] mfd: at91-usart: added mfd driver for usart
Date
This mfd driver is just a wrapper over atmel_serial driver and
spi-at91-usart driver. Selection of one of the drivers is based on a
property from device tree. If the property is not specified, the default
driver is atmel_serial.

Signed-off-by: Radu Pirea <radu.pirea@microchip.com>
---
drivers/mfd/Kconfig | 10 ++++
drivers/mfd/Makefile | 1 +
drivers/mfd/at91-usart.c | 75 ++++++++++++++++++++++++++++
include/dt-bindings/mfd/at91-usart.h | 17 +++++++
4 files changed, 103 insertions(+)
create mode 100644 drivers/mfd/at91-usart.c
create mode 100644 include/dt-bindings/mfd/at91-usart.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index b860eb5aa194..de99b79061b7 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -99,6 +99,16 @@ config MFD_AAT2870_CORE
additional drivers must be enabled in order to use the
functionality of the device.

+config MFD_AT91_USART
+ tristate "AT91 USART Driver"
+ select MFD_CORE
+ depends on OF
+ help
+ Select this to get support for AT91 USART IP. This is a wrapper
+ over at91-usart-serial driver and usart-spi-driver. Only one function
+ can be used at a time. The choice is done at boot time by the probe
+ function of this MFD driver according to a device tree property.
+
config MFD_ATMEL_FLEXCOM
tristate "Atmel Flexcom (Flexible Serial Communication Unit)"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index d9d2cf0d32ef..db1332aa96db 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -185,6 +185,7 @@ obj-$(CONFIG_MFD_SPMI_PMIC) += qcom-spmi-pmic.o
obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
obj-$(CONFIG_MFD_TPS65090) += tps65090.o
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
+obj-$(CONFIG_MFD_AT91_USART) += at91-usart.o
obj-$(CONFIG_MFD_ATMEL_FLEXCOM) += atmel-flexcom.o
obj-$(CONFIG_MFD_ATMEL_HLCDC) += atmel-hlcdc.o
obj-$(CONFIG_MFD_ATMEL_SMC) += atmel-smc.o
diff --git a/drivers/mfd/at91-usart.c b/drivers/mfd/at91-usart.c
new file mode 100644
index 000000000000..87094463f8f4
--- /dev/null
+++ b/drivers/mfd/at91-usart.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for AT91 USART
+ *
+ * Copyright (C) 2018 Microchip Technology
+ *
+ * Author: Radu Pirea <radu.pirea@microchip.com>
+ *
+ */
+
+#include <dt-bindings/mfd/at91-usart.h>
+
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/core.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+static struct mfd_cell at91_usart_spi_subdev = {
+ .name = "at91_usart_spi",
+ .of_compatible = "microchip,at91sam9g45-usart-spi",
+ };
+
+static struct mfd_cell at91_usart_serial_subdev = {
+ .name = "atmel_usart_serial",
+ .of_compatible = "atmel,at91rm9200-usart-serial",
+ };
+
+static int at91_usart_mode_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct mfd_cell cell;
+ u32 opmode;
+ int err;
+
+ err = of_property_read_u32(np, "at91,usart-mode", &opmode);
+
+ switch (opmode) {
+ case AT91_USART_MODE_SPI:
+ cell = at91_usart_spi_subdev;
+ break;
+ case AT91_USART_MODE_SERIAL:
+ default:
+ cell = at91_usart_serial_subdev;
+ }
+
+ return mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO, &cell, 1,
+ NULL, 0, NULL);
+}
+
+static const struct of_device_id at91_usart_mode_of_match[] = {
+ { .compatible = "atmel,at91rm9200-usart" },
+ { .compatible = "atmel,at91sam9260-usart" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, at91_flexcom_of_match);
+
+static struct platform_driver at91_usart_mfd = {
+ .probe = at91_usart_mode_probe,
+ .driver = {
+ .name = "at91_usart_mode",
+ .of_match_table = at91_usart_mode_of_match,
+ },
+};
+
+module_platform_driver(at91_usart_mfd);
+
+MODULE_AUTHOR("Radu Pirea <radu.pirea@microchip.com>");
+MODULE_DESCRIPTION("AT91 USART MFD driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/dt-bindings/mfd/at91-usart.h b/include/dt-bindings/mfd/at91-usart.h
new file mode 100644
index 000000000000..ac811628a42d
--- /dev/null
+++ b/include/dt-bindings/mfd/at91-usart.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides macros for AT91 USART DT bindings.
+ *
+ * Copyright (C) 2018 Microchip Technology
+ *
+ * Author: Radu Pirea <radu.pirea@microchip.com>
+ *
+ */
+
+#ifndef __DT_BINDINGS_AT91_USART_H__
+#define __DT_BINDINGS_AT91_USART_H__
+
+#define AT91_USART_MODE_SERIAL 1
+#define AT91_USART_MODE_SPI 2
+
+#endif /* __DT_BINDINGS_AT91_USART_H__ */
--
2.17.0
\
 
 \ /
  Last update: 2018-05-11 12:38    [W:0.137 / U:9.100 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site