lkml.org 
[lkml]   [2018]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 5/7] usb: mtu3: make USB_MTU3_DUAL_ROLE depend on EXTCON but not USB_MTU3
Date
In fact the driver depends on EXTCON only when it's configed as
USB_MTU3_DUAL_ROLE, so make USB_MTU3_DUAL_ROLE depend on EXTCON but
not USB_MTU3.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
drivers/usb/mtu3/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/mtu3/Kconfig b/drivers/usb/mtu3/Kconfig
index 25cd619..8daf277 100644
--- a/drivers/usb/mtu3/Kconfig
+++ b/drivers/usb/mtu3/Kconfig
@@ -2,7 +2,7 @@

config USB_MTU3
tristate "MediaTek USB3 Dual Role controller"
- depends on EXTCON && (USB || USB_GADGET) && HAS_DMA
+ depends on (USB || USB_GADGET) && HAS_DMA
depends on ARCH_MEDIATEK || COMPILE_TEST
select USB_XHCI_MTK if USB_SUPPORT && USB_XHCI_HCD
help
@@ -40,6 +40,7 @@ config USB_MTU3_GADGET
config USB_MTU3_DUAL_ROLE
bool "Dual Role mode"
depends on ((USB=y || USB=USB_MTU3) && (USB_GADGET=y || USB_GADGET=USB_MTU3))
+ depends on (EXTCON=y || EXTCON=USB_MTU3)
help
This is the default mode of working of MTU3 controller where
both host and gadget features are enabled.
--
1.9.1
\
 
 \ /
  Last update: 2018-05-10 07:49    [W:0.057 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site