lkml.org 
[lkml]   [2018]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 4/9] dt-bindings: input: touchscreen: resistive-adc-touch: create bindings
Date
Added bindings for generic resistive touchscreen ADC.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
Changes in v5:
- changed property name touchscreen-threshold-pressure to
touchscreen-min-pressure

Changes in v3:
- renamed file and compatible to exclude "generic" keyword
- removed the pressure threshold property, added it as a common
touchscreen property in the touchscreen common bindings in a separate
commit.

Changes in v2:
- modified bindings to have a generic resistive touchscreen adc driver
instead of specific architecture one.


.../input/touchscreen/resistive-adc-touch.txt | 30 ++++++++++++++++++++++
1 file changed, 30 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt

diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
new file mode 100644
index 0000000..51456c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
@@ -0,0 +1,30 @@
+Generic resistive touchscreen ADC
+
+Required properties:
+
+ - compatible: must be "resistive-adc-touch"
+The device must be connected to an ADC device that provides channels for
+position measurement and optional pressure.
+Refer to ../iio/iio-bindings.txt for details
+ - iio-channels: must have at least two channels connected to an ADC device.
+These should correspond to the channels exposed by the ADC device and should
+have the right index as the ADC device registers them. These channels
+represent the relative position on the "x" and "y" axes.
+ - iio-channel-names: must have all the channels' names. Mandatory channels
+are "x" and "y".
+
+Optional properties:
+ - iio-channels: The third channel named "pressure" is optional and can be
+used if the ADC device also measures pressure besides position.
+If this channel is missing, pressure will be ignored and the touchscreen
+will only report position.
+ - iio-channel-names: optional channel named "pressure".
+
+Example:
+
+ resistive_touch: resistive_touch {
+ compatible = "resistive-adc-touch";
+ touchscreen-min-pressure = <50000>;
+ io-channels = <&adc 24>, <&adc 25>, <&adc 26>;
+ io-channel-names = "x", "y", "pressure";
+ };
--
2.7.4
\
 
 \ /
  Last update: 2018-05-10 12:52    [W:0.057 / U:4.672 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site